Mechanical Engineering: Recent submissions

  • Computational Analysis of Heat Transfer and Pressure Drop in Helically Micro Finned Tubes 
    Muhammad Ammar Ali, Supervised by Dr Muhammad Sajid (SMME, 2021)
    In this study, pressure drop and heat transfer characteristics of smooth tube and internal helically micro-finned tubes with two different fin-to-fin height ratios i.e. equal fin height and alternating fin height, are ...
  • Impact of supply chain technology on corporate performance and sustainability in Pakistan 
    Muhammad Irtaza, Supervised by Dr Khalid Akhtar (SMME, 2021)
    An iron and steel production in Pakistan is assessed via life cycle assessment in this study by usage of SimaPro software and IMPACT 2002þ impact assessment method, for the comparison of effects processes (coke making, ...
  • Evaluation of Upper Limb Assistive device of 1 DOF and 2 DOF Grip Motions for Stroke Patients 
    Muhammad Umair Tariq, Supervised by Dr Asim Waris (SMME, 2021)
    Cheap solutions for exoskeletal gloves that are powered by physical motions of body are very less in the market with many of them requiring electronic setups and programmable devices to work. The exoskeletal wearable ...
  • AGRICULTURAL UAV DESIGN (AGRI-DRONE) 
    FAHAD NIAZ MUHAMMAD ABDULLAH MUHAMMAD KASHIF USAMA ARIF KHAN NIAZI, Supervised by (SMME, 2021)
    Unmanned air vehicles are a promising technology having a wide range of applications. In this technologically evolving world, numerous new precision farming technologies have emerged to optimize crop productivity and to ...
  • Thermal Management of PV Panels using Passive Cooling Approaches 
    Muhammad Danish Naeem Hubaib Khan Talha Rauf Muhammad Talha, Supervised by Dr Muhammad Sajid, (SMME, 2021)
    Due to rising global warming and increased energy security around the world, there is an ever-increasing need for transition towards more cleaner and renewable energy sources around the world in place of conventional energy ...
  • DESIGN AND ANALYSIS OF AN ELECTRIC ATTACHMENT FOR PROPELLING A WHEELCHAIR 
    Sunia Tanweer Syed Muhammad Faraz Hussain Kazmi, Supervised by Dr Aamir Mubashar (SMME, 2021)
    Over the span of the last couple of years, great strides have been made in the domain of assistive technology for the paraplegic community. Several of these advancements pertain to devices energized through various sources ...
  • Design and Analysis of a Bladeless Drone 
    Saad Ejaz Muhammad Shahzad, Supervised by Dr. Muhammad Jawad Khan (SMME, 2021)
    With the rapid growth of the global drone market, drone safety has become a matter of prime importance. Among drone accidents, propeller-based injuries dominate both in the frequency of occurrence and the severity of the ...
  • DESIGN AND ANALYSIS OF HYBRID HORIZONTAL TURBINE 
    Hammad Khan Muhammad Zun Nooren Bangash Muhammad Saad Raza Hafsa Sajjad, Supervised by Dr. Emad Ud Din (SMME, 2021)
    This thesis is intended to describe the theoretical solution to our final year project, Design and Analysis of a Horizontal Hybrid Turbine. The project was aimed at giving the proof of concept for a hybrid turbine, i.e., ...
  • COMPUTATIONAL MODAL ANALYSIS OF A LOW-PRESSURE TURBINE BLADE USING DIFFERENT MATERIALS 
    Shehzada Anees Khan Ihtesham Arif, Supervised by Dr. Niaz Bahadur Khan (SMME, 2021)
    Gas turbine engines encompass a wide range of applications ranging from electricity production to aircraft propulsion. The air is raised to a high temperature and pressure which then is fed to a turbine where it expands ...
  • PORTABLE PLASMA CNC MACHINE 
    MUHAMMAD AWAIS GOHAR MEHMOOD BAJWA ALI AHMED MUHAMMAD ABDULLAH, Supervised by Dr. Jawad Aslam (SMME, 2021)
    The report covers the aspects of the design and fabrication of a portable plasma CNC machine. CNC machines are generally non-portable and very expensive. We aim to fabricate a very portable yet fairly accurate (accuracy ...
  • Design of a Variable Valve Actuation System For an Automobile Engine 
    Muhammad Shamir Shahid Muhammad Nauman Tariq Muhammad Mubashir Muhammad Shaheer Khan, Supervised by Dr. Sami Ur Rehman (SMME, 2021)
    to the continuous increase in global warming and pollution around the world, there is an increase need of reducing CO2 emissions that harm the environment. Automobiles are one of the major contributors to the damage of ...
  • DESIGN ANALYSIS AND MANUFACTURING OF KNEE ANKLE FOOT ORTHOSIS (KAFO) 
    Jawad Ali Muhammad Abbas, Supervised by Dr. Niaz Bahadur Khan (SMME, 2021)
    Lower limb orthosis are used to control instabilities that are primarily caused by neurological and muscular diseases, such as post-polio syndrome, spinal cord injury etc. by maintaining proper alignment and controlling ...
  • DESIGN, ANALYSIS & MANUFACTURE OF A SAFE LOW COST CHAFF CUTTER 
    Ebad Ur Rehman Muhammad Hammad Maqsood Ibrar Ullah, Supervised by Dr. Sana Waheed (SMME, 2021)
    Rising human injuries owing to unsafe Chaff Cutters among farmers is an increasing concern in Pakistan. Chaff cutters are the leading cause of agricultural injuries (50-65%). Injuries are mostly the upper limb amputations. ...
  • DEVELOPMENT OF A COMPUTER CODE TO STUDY AND ANALYZE DIFFERENT TECHNIQUES EMPLOYED FOR TURBINE COOLING 
    Muhammad Uzair Azhar Mohammad Sibtain Dogar Muhammad Talal Khan Azmatullah, Supervised by Abdul Naeem Khan (SMME, 2021)
    The distribution of temperature for a turbine blade is highly important to be determined so that we can avoid excessive high temperatures of the blade and we can determine its temperature gradients. The temperature ...
  • BIO - INSPIRED FLAPPING WING ENERGY HARVESTER 
    Syed Maarij Hyder Zaidi Hamza Shahid Paracha Muhammad Abubakar Muhammad Zaid Javid, Supervised by Dr, Aamir Mubashar (SMME, 2021)
    In order to generate clean and green energy through water resources as an alternative to large rotary turbine-based dams, an oscillating hydrofoil turbine is proposed in this project that seeks to utilize shallow flowing ...
  • VISCO HYDRAULIC (DYNAMIC SUSPENSION SPOOL VALVE) SHOCK ABSORBER 
    Neeraj Nankani Muhammad Hashir Naeem Muhammad Hasnat Aman Muhammad Zaid Butt, Supervised by Dr. Samiur Rahman Shah (SMME, 2021)
    In this world of modernity everything is evolving at a very greater pace so does the automobile. Fast moving cars follow the same trajectory of evolution to meet human demands, comfort, safety, and reliability etc. Racing ...
  • DESIGN AND DEVELOPMENT OF PORTABLE VACUUM FORMING MACHINE 
    Hafiz Muhammad Arslan Muhammad Umer Farooq Muhammad Ali Haider, Supervised by Dr Mian Ashfaq Ali (SMME, 2021)
    This project aims at developing a portable vacuum forming machine for local industry and providing them an inexpensive yet reliable vacuum forming machine. Vacuum forming is a type of thermoforming process in which a ...
  • Design and Modeling of Straight-Blade Vertical Axis Wind Turbine 
    Muhammad Ahmad Saleem Muhammad Ahsan Ali Muhammad Hamza Naeem Muhammad Huzefa, Supervised by Dr. Sadaqat Ali (SMME, 2021)
    Pakistan is one of those countries which has large potential of energy harvest from renewable energy sources and specially from wind. With the surge of global warming, the world is moving towards cleaner and viable sources ...
  • Design and Analysis of Naturally Inspired Micro-UAV 
    Daim Ejaz Mohsin Bashir Muhammad Saad Muhammad Ali Akbar, Supervised by Dr. Emad Uddin (SMME, 2021)
    Man has always been fascinated by the phenomenon of flight and has looked up to the skies to imagine things. Over the years, humans have made many attempts to replicate the flight patterns of birds and insects but failed. ...
  • Design and Manufacturing of Crankshaft Inspection Machine 
    Abdullah Azzam Muhammad Abdul Hadi Muhammad Bilal Anwar Muhammad Hassan, Supervised by Dr. Riaz Mufti (SMME, 2021)
    The purpose of this project is to design and fabricate a Crankshaft Inspection Machine. It serves as a proof of concept for later versions to be designed for Tractor OEM. The machine will be able to measure Diameter of ...

Search DSpace


Advanced Search

Browse

My Account