Ablative composites are also called as thermal protection system (TPS) which have a wide application in rocket nozzles, engine throats and leading edges. They are used to protect the metallic structure or component usually ...

Petroleum refineries are producing an enormous amount of oil sludge and declared as “Hazardous Waste” under schedule waste 2. This sludge is a mixture of oxyhydrocarbon, traces of heavy elements, oil and water. If this ...

Scientific advancements in the latest era have lead widespread and endless growth in the production of plastic materials. This exponential development has made public distress over the environmental effect instigated by ...

The electrochemical water splitting by using renewable electricity is being considered as a sustainable, clean, and considerable source of hydrogen fuel for future transportation and energy applications. However, the ...

There is an enormous need in the health welfare sector to manufacture inexpensive dialyzer membranes with minimum dialysis duration. In order to optimize the dialysis cost and duration, an in-depth analysis of the effect ...

A simple wet chemical route involving ultrasonication is used in this work for the insitu decoration of NiCo2O4 on the surface of carbon. The NPs of NiCo2O4 are synthesized via same route. Nickel acetate tetra-hydrate ...

The present research is focused on enhancement of hydrogen generation rate in well-known Al-H2O reaction by removing passive oxide layer (Al2O3) under ultrasonic field and varying temperature (40oC, 50oC , 60oC) various ...

An annulus having 0.5 eccentricity, with the diameters ratio of 0.5, measuring three velocity elements consisted of feebly fluid deprived of non-Newtonian shear thinning elasticity and rotational inner cylinder at 300rpm. ...

Aluminium alloys in automotives is used to achieve lightness with strength. Lightness or weight saving enhances fuel efficiency while strength assure safety. The demand of using aluminium and its alloys is increasing day ...

Casting is a manufacturing process which is adopted to make different shapes; may experience defects like shrinkage, porosity and short metal filling, resulting in rejection of casting. These defects are highly dependent ...