Abstract:
Modern-day technology has set very high standards for robust, reliable, and high-speed
communications. Software de ned radios (SDR) have provided the platform to researchers
in designing ad-hoc networks addressing these standards. SDR networks are required to
achieve endurance, reliability, e cient data transmission, portability, and adaptability to
various operating requirements. Their immediate deployment in perilous ventures without
the use of any permanent infrastructure has made them an inevitable choice for ad-hoc
tactical scenarios. Increasing demands of adaptability and recon gurability impose many
challenges on the design of SDR waveforms even for highly heterogeneous wireless networks.
Narrowband waveforms provide robustness and work for longer distances but lack in provid-
ing higher throughput, whereas, wideband waveforms provide much higher data rates at the
cost of reduced robustness and shorter ranges. A heterogeneous SDR network having diverse
quality of service (QoS), range requirements, and channel conditions cannot fully rely on
one of the narrowband or wideband waveforms. This piece of work proposes a multi-mode
multi-rate physical layer with a hybrid narrowband/wideband (NBWB) networking wave-
form. The concept is based on simultaneous transmission and reception of signals having
multiple bandwidths through the analog wideband front end. A digital front-end architecture
is presented which uses the sample rate conversion and channelization of multiple signals.
This formulates a composite signal which is then transmitted by using the con guration of
wideband RF front end. At the receiver, the composite signal is received by using the same
front end con gured in wideband mode. Apart from physical layer concerns of range and
robustness addressed by the physical layer, signi cant e orts have been made in the past in
cross-layer design to achieve maximal e ciency and higher throughput. In this research, a
cross-layer solution is proposed which consists of medium access control (MAC) layer design
providing an intelligent channel allocation scheme supported by the presented multi-mode
multi-rate physical layer. This research also proposes a cognitive engine that further empow-
iv
ers this cross-layer design approach to achieve high data rates, improved quality of service
(QoS), and adaptive range capabilities. The presented physical layer exhibits a mixed-use of
narrowband and wideband waveforms. The cross-layer design proposes a reduction in both
control and data phase latency. MAC layer ensures the maximal utilization of the time and
frequency spectrum. Bandwidth and delay optimizations are also managed by the proposed
trio of the physical layer, MAC, and cognition to reduce latency and achieve desired QoS.