SMME: Recent submissions

  • Identifying Neurophysiological Correlates of Frontotemporal Dementia: Resting State EEG and Phase Synchronization Analysis 
    Ali, Salwa (School of Mechanical & Manufacturing Engineering (SMME), NUST, 2024)
    The need to develop more efficient neuropsychological biomarkers is paramount in the identification of neurodegenerative diseases, tracking the efficiency of treatment and in an effort to avoid the huge financial cost ...
  • Analysis of variations in brain states and impact of TES during behavioral task 
    Arshad, Sidra (School of Mechanical & Manufacturing Engineering (SMME), NUST, 2024)
    This research targeted to investigate the effects of low-gamma High Definition transcranial alternating current (HD-tACS) at the left DLPFC and primary motor cortex in healthy individuals performing continuous attention ...
  • Chip Formation Analysis and Machining Optimization of Titanium Ti6Al4V 
    Sajjad, Muhammad Uzair (School of Mechanical & Manufacturing Engineering (SMME), NUST, 2024)
    The advancement in the materials science domain has led to the development of many robust composite alloys yielding high tensile strength, low density, and good corrosion resistance. One of such materials is the ...
  • EXPERIMENTAL INVESTIGATION OF NOVEL IN-TUBE INSERTS FOR PERFORMANCE ENHANCEMENT IN SHELL AND TUBE TYPE HEAT EXCHANGERS AND THEIR ECONOMIC EVALUATION 
    Ahmed Bilal , Muhammad Hassan Khalil Qureshi ,Faizan Ahmed , Muhammad Abdullah (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2024)
    The current research focuses on experimentally exploring thermal enhancement and pressure drop in a tube equipped with detached hollow turbulators of different shapes. A novel aspect of this study is the examination of ...
  • Examining the Effectiveness of Virtual Reality in Stress Management 
    Tahir, Sheza (School of Mechanical & Manufacturing Engineering (SMME), NUST, 2024)
    Virtual Reality (VR) has emerged as a promising tool in healthcare management, with recent studies exploring its effectiveness in addressing various psychological and physiological disorders. Stress is prevalent in modern ...
  • COMPUTER VISION ENABLED DROWNING RESCUE UNMANNED AERIAL SYSTEM 
    Muhammad Ubaid , Muhammad Abdullah , Muhammad Umer Farooq ,Saad Ali Khan (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2024)
    This research project is dedicated to advancing the field of rescue UAVs by designing and manufacturing a specialized lifeguard drone. Our primary goal is to develop a lifeguard drone equipped with an intelligent dropping ...
  • SOLAR POWERED GRASS CUTTER FOR DOMESTIC PURPOSES 
    ZAEEM SHAHID , SYED MUHAMMAD RABAH ALI SHAH , ARQAM AHMAD , ISLAM NAWAZ (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2024)
    The development of renewable energy-powered household devices is a result of growing awareness of sustainable living and the need for eco-friendly solutions. Due to the usage of an IC engine in older grass cutter models, ...
  • PORTABLE SOLAR REFRIGERATOR WITH BATTERY BACKUP 
    Tooba Rashid , Malik Huzaifa ,Laiba Younis,Haris Shaheryar Ahmad (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2024)
    This report presents comprehensive details of the progress of our Final Year Design Project i.e., a Portable Solar Refrigerator with a Battery Backup. The project addresses the problem of inadequate cold storage available ...
  • PAPER RECYCLING MACHINE 
    Muhammad Fahad Nafees , Mohammad Hanzla Khalid ,Zain Rasool , Adeel Asif (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2022)
    The purpose of the project is to design and fabricate the eco-friendly, compact portable and economical paper recycling machine that utilizes the waste or used paper to recycle it and making various products like cardboard ...
  • DESIGN AND FABRICATION OF A ROTOR-STATOR HOMOGENIZER 
    Abdullah Ahmad , Aabis Tabassum , Muhammad Hammad , Syed Muhammad Hassan Kazmi (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2024)
    A rotor-stator homogenizer is a device used to generate a local shear rate significantly higher than that produced by typical radial agitators. It consists of a rotor, typically in a floating state with respect to the ...
  • Developing Weighted Triple-Bottom Line Indicators for Pakistani Steel Sustainability: A Delphi Consensus Study 
    Saher, Rida (School of Mechanical & Manufacturing Engineering (SMME), NUST, 2024)
    This research proposes a set of weighted Triple Bottom Line (TBL) indicators that are adapted to the specific issues faced by the Pakistani steel sector. This study tackles the crucial gap in complete sustainability ...
  • Marposs Grinding Gauge / 
    Muhammad Hamza Ali , Abdul Rehman, Muhammad Faizan Khalid ,Nashit Ahmed (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2024)
    The main goal of this project is to design, fabricate and install an in-process Grinding Gauge. This gauge is used to measure the change in diameter of shaft during grinding operation up to 1 Micron and stop the grinding ...
  • DESIGN AND DEVELOPMENT OF A WHEEL BALANCING MACHINE FOR THE LOCAL MARKET 
    Saad Bin Asad , Waqar Rafique, Muhammad Asjad , Muhammad Hannan Ayub (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2024)
    To improve accuracy and user convenience, this report investigates the creation and application of a dynamic wheel balancing device coupled with a mobile application for the automotive sector. When it comes to addressing ...
  • Effects of Broadband Noise on Sleep Quality 
    Zulfiqar, Zanib (School of Mechanical & Manufacturing Engineering (SMME), NUST, 2024)
    Quality sleep is related to multiple valued performances in human life, including maintaining health and improving outcomes at work. Disturbance of sleep can increase the morbidity rate and can create multiple psychological ...
  • HAND EXOSKELETON FOR ASSISTIVE FUNCTION 
    Zinia Nadeem Bhutta, Sarah Naeem (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2024)
    Hand exoskeletons offer a promising avenue for assisting individuals with hand impairments and enhancing rehabilitation outcomes. However, current designs often confront challenges related to vibrations and backlash, ...
  • Intuitive Assistive Robotic Manipulator (I-ARM) 
    Syed Hadi Raza Zaidi , Saad Bin Saeed , Muhammad Saad Zafar , Muhib Ur Rehman Farooqui (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2024)
    This project presents the design and fabrication of an intuitive robotic manipulator tailored for assistive use by individuals with but not limited to upper limb disabilities. This initiative aims to enhance user quality ...
  • DEVELOPMENT, INTEGRATION AND TESTING OF A TRANSRADIAL PROSTHETIC DEVICE 
    Ali Asif , Maira Omar, Sakhi Saad,Mohammad Ali (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2022)
    There are more than 1 million annual amputations globally, with a significant number of those being below-elbow amputees. While prosthesis are vital in enabling amputees to lead somewhat normal lives, a number of patients ...
  • Exo-Glove for Stroke Patients 
    Kinza Naveed , Muhammad Ahmed Khan , Muhammad Faizan Afzal, Zain (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2022)
    This report first introduces wide range of assistive Exo-Gloves available, analyzes their structure, mode, and method of function. Reasons are cited for the rejection or approval of a particular Exo-Glove. Then it provides ...
  • COMPOSITE BASED 3D PRINTER 
    Muhammad Husnain , Malik Zain Ali Sajid , Muhammad Hamza Baig,Muhammad Touheed (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2024)
    The world has witnessed many significant technological developments over the past decade, 3D printing being one of them. 3D printing is an additive manufacturing technique that layer by layer prints three-dimensional ...
  • DESIGN AND FABRICATION OF A HYBRID DARRIEUS-SAVONIUS MIRCO HYDROKINETIC TURBINE 
    Farhan Rafique, Umar Farooq ,M Nauman Saeed (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2018)
    The project was initiated with an objective to design a power generation system that could easily be used in an open channel flow. The main targeted areas of the operation of this system were rivers and canals. We had an ...

Search DSpace


Advanced Search

Browse

My Account