BS: Recent submissions

  • Marposs Grinding Gauge / 
    Muhammad Hamza Ali , Abdul Rehman, Muhammad Faizan Khalid ,Nashit Ahmed (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2024)
    The main goal of this project is to design, fabricate and install an in-process Grinding Gauge. This gauge is used to measure the change in diameter of shaft during grinding operation up to 1 Micron and stop the grinding ...
  • DESIGN AND DEVELOPMENT OF A WHEEL BALANCING MACHINE FOR THE LOCAL MARKET 
    Saad Bin Asad , Waqar Rafique, Muhammad Asjad , Muhammad Hannan Ayub (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2024)
    To improve accuracy and user convenience, this report investigates the creation and application of a dynamic wheel balancing device coupled with a mobile application for the automotive sector. When it comes to addressing ...
  • HAND EXOSKELETON FOR ASSISTIVE FUNCTION 
    Zinia Nadeem Bhutta, Sarah Naeem (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2024)
    Hand exoskeletons offer a promising avenue for assisting individuals with hand impairments and enhancing rehabilitation outcomes. However, current designs often confront challenges related to vibrations and backlash, ...
  • Intuitive Assistive Robotic Manipulator (I-ARM) 
    Syed Hadi Raza Zaidi , Saad Bin Saeed , Muhammad Saad Zafar , Muhib Ur Rehman Farooqui (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2024)
    This project presents the design and fabrication of an intuitive robotic manipulator tailored for assistive use by individuals with but not limited to upper limb disabilities. This initiative aims to enhance user quality ...
  • DEVELOPMENT, INTEGRATION AND TESTING OF A TRANSRADIAL PROSTHETIC DEVICE 
    Ali Asif , Maira Omar, Sakhi Saad,Mohammad Ali (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2022)
    There are more than 1 million annual amputations globally, with a significant number of those being below-elbow amputees. While prosthesis are vital in enabling amputees to lead somewhat normal lives, a number of patients ...
  • Exo-Glove for Stroke Patients 
    Kinza Naveed , Muhammad Ahmed Khan , Muhammad Faizan Afzal, Zain (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2022)
    This report first introduces wide range of assistive Exo-Gloves available, analyzes their structure, mode, and method of function. Reasons are cited for the rejection or approval of a particular Exo-Glove. Then it provides ...
  • COMPOSITE BASED 3D PRINTER 
    Muhammad Husnain , Malik Zain Ali Sajid , Muhammad Hamza Baig,Muhammad Touheed (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2024)
    The world has witnessed many significant technological developments over the past decade, 3D printing being one of them. 3D printing is an additive manufacturing technique that layer by layer prints three-dimensional ...
  • DESIGN AND FABRICATION OF A HYBRID DARRIEUS-SAVONIUS MIRCO HYDROKINETIC TURBINE 
    Farhan Rafique, Umar Farooq ,M Nauman Saeed (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2018)
    The project was initiated with an objective to design a power generation system that could easily be used in an open channel flow. The main targeted areas of the operation of this system were rivers and canals. We had an ...
  • AERIAL SEED DISPERSAL SYSTEM 
    Shuja Amjad , Altamash Saqib ,Muhammad Mehtab Asghar, Tabsheer Ali Askari (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2020)
    The aim of this project is to develop an Aerial Seed Drop System. It shall employ a quadcopter to drop a payload of Seedballs accurately and autonomously on locations which do not currently contain any trees and are suitable ...
  • Performance Improvement of Geysers 
    MUHAMMAD FAIZAN SAJID, HAIDER ALI ,ABDUL QADOOS (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2020)
    Due to the Depletion of natural resources including natural gas there is a demand to develop new methods and techniques to efficiently use the existing resources. Gas geysers are being used for water heating at homes and ...
  • Wall Climbing Robot Using Thrusters/Propellers 
    Amna Javaid, Kaleem Ahsan Zubari , Hafiz Saif Ali (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2020)
    This report reviews the designing and modeling of a hybrid-actuated robot which is able to climb vertically on a wall. It utilizes friction force produced by the wheels as well as the normal force generated by the propellers ...
  • Design and Fabrication of Test Rig for Acoustic Analysis of Crank Balancer 
    Hammad Saleem, Abdul Ahad Khan ,Asjad Ali , Syed Muhammad Mehdi (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2022)
    This project aims towards the acoustic analysis of the crank balancer of a tractor engine – Massey Ferguson MF 300. Our job is to design and fabricate the Mechanical Test Rig for this analysis. Further analysis using ...
  • AUTOMATED HYBRID WATER HEATING SYSTEM 
    Bariq Iqbal Sandhu, Ahsan Munib Khalid ,Fareed Ahmad Abdani (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2022)
    The aim of this Project is to Develop a Fully Automated Hybrid Solar Water Heating System. The system would be based on the Hybrid PVT Panels. PVT panels produce dual output, as electrical energy as well as thermal heat. ...
  • DESIGN OF VARIABLE RATE SPRAYER FOR AGRICULTURAL DRONES 
    Muhammad Bilal, Muhammad Umair Ashraf, Moazam Mustafa Mughal (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2022)
    Pest outbreaks in agricultural landscapes are growing more common as climate and farmland ecological conditions change, increasing the demand for enhanced crop production equipment and methods. UAV-based agricultural ...
  • Design and Development of HVAC Sleeping Bag / 
    Muhammad Shehryar Yousuf, Bilawal Khan , Panhwar Ahsen Makhdoom , Muhammad Ahab Imran (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2024)
    This project is aimed at providing an industry solution to the lack of HVAC enabled sleeping bags that have the capability of cooling in addition to the heating feature. The idea is originally proposed by Techy Tech to ...
  • Turbocharger Based Thrust Generating Device / 
    Muhammad Ahmad Ali, Salman Zahid ,Mohammad Khubaib Mujahid,Mohammad Hashir Ijaz (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2024)
    This project aims to repurpose standard turbochargers into thrust-generating devices by integrating them with a combustion chamber and nozzle. The concept involves utilizing the compressed air generated by the ...
  • DESIGN AND FABRICATION OF HAPTIC GLOVE 
    Ali Raza, Arqam Bin Ahmad, Khubaib Ahmed (School of Mechanical & Manufacturing Engineering (SMME), NUST, 2023)
    Haptic feedback gloves offer a solution to the challenges faced by companies in providing hands-on training to operators. Traditional training methods often involve high costs and potential risks in hazardous environments. ...
  • Design and Development of Automated Mannequin 
    Muhammad Aadrish, Fahad Naveed ,Farhan Zafar (School of Mechanical & Manufacturing Engineering (SMME) , NUST, 2013)
    Mannequin” is an old invention. It entered garments industry in 1950s and revolutionized marketing techniques in garments industry. It had two major impacts on garments industry: 1. A Dressmaker's assistant who wears new ...
  • DESIGN AND FABRICATION OF GEO-THERMAL SPACE HEATING AND COOLING SYSTEM 
    Faran Amjad Baig, Zohaib Rafique, Rai Junaid Hussain (Scholl of Mechanical & Manufacturing Engineering (SMME), NUST, 2013)
    Ground-source heat pump systems are one of the promising new energy technologies that can be a sustainable solution for ongoing energy crisis in Pakistan. The purpose of this study is to build a working model of geothermal ...
  • DESIGN AND FABRICATION OF A 3D CONCRETE PRINTER 
    Syed Muhammad Asghar Abbas, Ibrahim Luqman ,Muhammad Ashir Atif, Muhammad Arham (School of Mechanical & Manufacturing Engineering (SMME), NUST, 2023)
    The construction industry has seen significant technological advancements in recent years, with 3D printing being one of the most notable. 3D printing technology has the potential to revolutionize the construction industry, ...

Search DSpace


Advanced Search

Browse

My Account