• Synthesis and Characterization of PEG-b-PLGA Copolymer-Based Nano Formulations via Flash Nano Precipitation 

  Nasir, Mahad Wahaj (School of Chemical and Material Engineering SCME, NUST, 2024)

  Flash Nanoprecipitation (FNP) is a popular and straightforward technique that involves the assembly of amphiphilic copolymers into nanoparticles for biomedical applications. The method is economical and fast for the ...
• DEMINERALIZED WATER PRODUCTION SYSTEM FOR HIGH PRESSURE BOILERS 

  Muhammad Uzair Khan, Umer Sohail Khan, Junaid Iqbal, Aun Abbas (School of Chemical & Material Engineering (SCME), NUST, 2024)

  This thesis presents a comprehensive study on the production of demineralized water for high-pressure boilers, focusing on a comparative analysis of two predominant processes: In the purification process, two common ...
• DESIGN OF UREA GRANULATION PROCESS WITH EMPHASIS ON ITS DYNAMIC STUDIES. 

  Usama Ali, Simra Zubair, Hanzala Labeeb, (School of Chemical & Material Engineering (SCME), NUST, 2024)

  The principal activity of the Company is manufacturing and marketing of fertilizer. Fertilizers provide essential elements for nourishment, development, and growth of plants as well as grain or fruit. Urea is produced ...
• DESIGN IMPROVEMENT ON THE AMMONIA PLANT WITH AN EMPHASIS ON ENERGY EFFICIENCY 

  Soohana, Amna, Hamza Safat, Wali Riaz (School of Chemical and Material Engineering (SCME), NUST, 2024)

  Ammonia is a highly valued compound utilized in a wide array of applications, particularly in the fertilizer industry for the production of various organic and inorganic compounds. Ammonia is traditionally produced using ...
• PROCESS DESIGN AND SIMULATION FOR ELECTROCATALYTIC CO2 CONVERSION TO VALUE-ADDED FUEL 

  Maheen Saeed, Haris Ali, Babar Abbas, Ahmad Adnan (School of Chemical and Material Engineering (SCME), NUST, 2024)

  The greenhouse effect sustains Earth's temperature at an optimal level for life, However, human activities have disrupted this equilibrium by releasing excessive greenhouse gases, resulting in a steady rise in global ...
• DESIGN OF POLYURETHANE PLANT FROM POLYOLS AND ISOCYANATES 

  Esha Zafar, Muqaddas Tariq Abraiz Najam, Nasir Majid (School of Chemical and Material Engineering (SCME), NUST, 2024)

  Polyurethane is a versatile polymer widely used as foam in furniture and automotive seating, insulation, coatings, adhesives and as elastomers. It is preferred over other polymers due to its exceptional properties such ...
• DESIGN OF EFFLUENT WATER TREATMENT SYSTEM FOR REUSE IN REFINERY OPERATIONS AT ATTOCK REFINERY LIMITED 

  Fiza Butt, Mahnoor Maqbool, Ayesha Jamil, M. Shaheer Shakeel (School of Chemical and Material Engineering (SCME), NUST, 2024)

  Effluent treatment plants are essential in industrial processes and environmental conservation, ensuring wastewater is safely discharged or reused. This project explores a multi-stage treatment process for industrial ...
• DESIGN AND SIMULATION OF SOLVAY PROCESS WITH EMPHASIS ON REDUCTION OF BICARBONATE MOISTURE AT WASH FILTERS 

  Muhammad Saad Bin Akbar, Mahad Hussain, Muhammad Areeb Rashid, Muhammad Bilal (School of Chemical and Material Engineering (SCME), NUST, 2024)

  The Solvay process is the common industrial process is the common industrial process used for production of Sodium carbonate (Na2CO3), also known as soda ash From Sodium Chloride (NaCl) and Calcium Carbonate (CaCO3) as ...
• PINCH ANALYSIS ON HOT AND COLD STREAMS OF AMMONIA PLANT FOR HEAT RECOVERY 

  Maria Ijaz, Mirza Arslan, Muhammad Tamoor, Fahad Sikandar (School of Chemical and Material Engineering (SCME), NUST, 2024)

  The aim of this study is to investigate the use of pinch analysis techniques to improve heat recovery in an ammonia production plant. In order to successfully navigate the complicated chemical processes involved in the ...
• DESIGN AND SIMULATION OF HYDROTREATER CATALYTIC UNIT WITH EMPHASIS ON CATALYST PERFORMANCE 

  Hasan Farrukh, Touseef Ismail, Talha Bilal, Jahanzeb Nouman (School of Chemical and Material Engineering (SCME), NUST, 2024)

  This thesis focuses on the design and simulation of a naphtha hydrotreating unit within a refinery, emphasizing the optimization of catalyst performance. Naphtha hydrotreating is a critical process for removing contaminants ...
• DESIGN AND SIMULATION OF PREREFORMER UNIT IN REFINERY 

  Syed Ali Mehdi, Aiman Nazeer, Hussain Murtaza, Qayyum Ahmad (School of Chemical and Material Engineering (SCME), NUST, 2024)

  The presence of contaminants in naphtha, including sulfur, oxygen, nitrogen, and organometallic compounds, poses a substantial obstacle to the refining process of crude oil into useful products. The effectiveness and ...
• DESIGN OF COST-EFFECTIVE NOVEL TREATMENT OF PROCESS CONDENSATE CONTAINING HF, AMMONIA & AMMONIUM NITRATE 

  Tamia Obaid, Aamir Iqbal, Sarmad Aftab, Abdul Hanan Shahid (School of Chemical and Material Engineering (SCME), NUST, 2024)

  The industrial process condensate like phosphate fertilizer manufacture and petroleum refining contains hazardous compounds like hydrofluoric acid (HF), ammonia (NH3), and ammonium nitrate (NH4NO3). These substances are ...
• DESIGN AND SIMULATION OF HIGH PRESSURE (HP) UREA SYNTHESIS LOOP 

  Muhammad Talha Tehseen, Sheikh Aliyan Asad, Abdul Moiz Faisal, Suman Tariq (School of Chemical and Material Engineering (SCME), NUST, 2024)

  This thesis explores the design and simulation of a High-Pressure Urea Synthesis Loop employing the Stamicarbon Process. The report commences with a meticulous selection of technology through an extensive literature ...
• ANNUAL PRODUCTION OF 400,000 TONNES OF PURE TEREPHTHALIC ACID FROM CRUDE TEREPHTHALIC ACID VIA CRYSTALLIZATION 

  Faizan Shahid, Momina Ibrahim, Abdul Aleem, Sulaiman Malik (School of Chemical and Material Engineering (SCME), NUST, 2024)

  The report designs and operates a Purified Terephthalic Acid (PTA) plant that will run parallel with an existing plant to increase production capacity and eliminate bottlenecks. The study begins by emphasizing PTA ...
• DESIGN & SIMULATION OF DIESEL HYDRODESULFURIZATION UNIT WITH EMPHASIS ON CATALYST OPTIMIZATION 

  MAAZ ALI, FAWAD ALI, SHAKEEL ABBAS, AMMAR ADIL (School of Chemical and Material Engineering (SCME), NUST, 2024)

  Diesel Hydrodesulphurization (DHDS) is one of the key operations in a refinery used in marking sulfur content in diesel fuel to be acceptable in the current market. This work concentrates on sensibly enhancing multiplex ...
• DESIGN AND SIMULATION OF SULFURIC ACID PLANT FROM ACID GAS IN OIL REFINERIES 

  Muhammad Muneeb Shahzad, Syed Ali Zain Ul Abedin, Muhammad Hassan Aamir, Sarah Ahmad (School of Chemical and Material Engineering (SCME), NUST, 2024)

  Industries must develop methods for raw material processing with greater vigilance than before due to stricter environmental laws. Sulfur emissions are the most pressing environmental risk associated with the processing ...
• DESIGN A GAS TURBINE GENERATOR AIR PREHEATING SYSTEM AND HEAT RECOVERY STEAM GENERATOR WITH FLUE GAS STACK RECOVERY 

  Naima Kamran, Ahmad Shafqat Malik, Riyan Mansoor Alavi, Abdul Waseh (School of Chemical and Material Engineering (SCME), NUST, 2024)

  The project has two major units in it, namely ‘Gas Turbine’ & ‘HRSG’. The GTG is a critical component in modern power generation, converting natural gas or other fuels into mechanical energy, which in turn drives an ...
• DESIGN OF KELLOGG REFORMER EXCHANGER SYSTEM (KRES) TO IMPROVE ENERGY EFFICIENCY OF AMMONIA PLANT 

  Aabid Saafi, Hasan Safdar (School of Chemical and Material Engineering (SCME), NUST, 2024)

  The primary aim of this project is to reduce natural gas consumption and reliance on it by implementing the Kellogg Reformer Exchanger System (KRES). This system utilizes catalystfilled tubes and harnesses heat from ...
• DESIGN AND SIMULATION OF AMMONIA RECOVERY UNIT FROM PURGE GAS 

  Munazza Khalid, Ammad ud din Khan, Abdul Rafay, Salman Akbar (School of Chemical and Material Engineering (SCME), NUST, 2024)

  In ammonia plants purge gas is extracted from the ammonia synthesis loop to maintain the inert gases (like Argon, Methane) level in the loop and maximize the conversion in the ammonia converter. Purge gas contains Hydrogen, ...
• DESIGN OF 150 TONNES/DAY PRODUCTION OF GREEN AMMONIA PLANT 

  Momina Mushtaq, Maryam Abbasi, Muhammad Araheem Abaid, Muhammad Uzair (School of Chemical and Material Engineering (SCME), NUST, 2024)

  Ammonia, with annual production of about 176 million tonnes, is a key component of many fertilizers. The conventional Haber-Bosch process for ammonia production relies on nonrenewable resources (natural gas) which are ...

View more