Ilyas, Zubdah(School of Chemical and Material Engineering SCME, NUST, 2025)
This study was designed to propose a novel drug delivery system (DDS) on U87 human glioblastoma cell lines using iron-based metal organic frameworks MIL-88B(NH2) as a drug delivery vehicle integrated with sodium alginate ...
Alam, Syed Fakhar(School of Chemical and Material Engineering SCME, NUST, 2014)
Shale is a fine-grained, sedimentary rock composed of mud that is a mix of flakes
of clay minerals and tiny fragments (2-50 μm) of other minerals, especially clay minerals
and carbonates. The ratio of clay to other ...
Asif, Ayaz; Hassan, Bilal; Awan, Amna Hafeez(School of Chemical and Material Engineering SCME, NUST, 2016)
Nowadays everything is about quality & life sustainability of materials in Oil Refineries. The major threat to material immature failure is corrosion. Sulfide corrosion of steels in refineries is a prevalent phenomenon ...
Javaid, Syed Saad(School of Chemical and Material Engineering SCME, NUST, 2014)
The discovery of Graphene opened exciting new pathways into the striking
world of 2D materials by revealing exotic condensed matter phenomena absent in bulk materials. The criticality of dimensionality of materials plays ...
Rauf, Muhammad Mudassar(School of Chemical and Material Engineering SCME, NUST, 2014)
Ni-20Cr coating offers superior resistance against high temperature oxidation and
corrosive salts. Therefore it is widely used in several industries for the protection of
metallic components. In present study, Ni-20Cr ...
Bilal, Muhammad Kashif(School of Chemical and Material Engineering SCME, NUST, 2012)
The effect of doping of Zinc in Nickel based spinal ferrites with composition (Ni1-
xZnxFe2O4) where (x = 0, 0.2, 0.4, 0.6, 0.8, 1) were prepared using chemical co-precipitation
method are investigated. Chemical phase ...
Ahmad, Qazi Mushtaq(School of Chemical and Material Engineering SCME, NUST, 2015)
Self-consolidating cement based composite is a most recent
cementitious system that compacts on its own in narrow places. The
constituents of the composite are analogous to the standard systems
except for the admixtures ...
Usman, Wajeeha(School of Chemical and Material Engineering SCME, NUST, 2013)
In the present work, a coating unit for depositing thin films has been developed
which works on the technique ―Closed Space Sublimation‖ where powdered material
is deposited under vacuum. Zinc Telluride thin films have ...
Saleem, Hareema(School of Chemical and Material Engineering SCME, NUST, 2014)
Organic photovoltaic devices are the main focus of research among the other OPV due to various
advantages like low cost, versatility of materials used in terms of tunability of their electrical and
optical properties, ...
Akram, Muhammad Aftab(School of Chemical and Material Engineering SCME, NUST, 2010)
In this work bioactive hydroxyapatite Ca10(PO4)6(OH)2 was synthesized which is chemically and structurally similar to mineral phase of natural bone and it can also form direct chemical bonds with the hard tissues of the ...
Anees, Fatima(School of Chemical and Material Engineering SCME, NUST, 2025)
To meet the rising global energy demands, there has been significant interest in developing
efficient and sustainable energy storage devices. Supercapacitors (SCs), renowned for their
rapid charge-discharge capabilities ...
Tahir, Muhammad Hamid(School of Chemical and Material Engineering SCME, NUST, 2015)
This research work considers a nanotechnology approach baseduponproduction of metal pre-treatments and organic coatings (a completeprotection system at all) designed from the nano scale. The ultimate goal wasdevelopment ...
After surgeries suture-related infections and fast corrosion rate of the biodegradable materials. To
address these challenges, this study investigates the application of a bilayer coating composed of
polyacrylic acid ...
Muhammad, Peer(School of Chemical and Material Engineering SCME, NUST, 2025)
This study examines tailoring the electrochemical properties of transition metal
oxides ZNCO, MOFs (ZIF-67) and their composite materials for hybrid supercapacitors.
The pristine ZNCO has a good specific capacitance due ...
Ghani, Muhammad Abdaal(School of Chemical and Material Engineering SCME, NUST, 2024)
The prediction of ageing and serviceability in single base propellants has become
remarkably effortless owing to the rapid advancement of new analytical techniques,
specifically High-performance liquid chromatography ...
Hassan, Syed Ahmad(School of Chemical and Material Engineering SCME, NUST, 2025)
The increasing prevalence of surgical site infections and the demand for advanced wound care
solutions have driven the development of innovative biomaterials. This study investigates the
quantification of Indica /Ch ...
Kiran, Tabinda(School of Chemical and Material Engineering SCME, NUST, 2024)
Conventional chemotherapy exhibits limited therapeutic efficacy against multidrug-resistant
cancers due to systemic toxicity and drug resistance mechanisms. In response to this challenge,
this work puts forward a ...
Naveed, Maham(School of Chemical and Material Engineering SCME, NUST, 2024)
This research investigates the impact of functionalized silica nanoparticles on the adhesion strength and durability of rubber-metal bonds in important automobile and aerospace applications. Applying conventional rubber-metal ...
Shahzad, Nimra; Shahzad, Nimra(School of Chemical and Material Engineering SCME, NUSTSchool of Chemical and Material Engineering SCME, NUST, 2025)
The purpose of this study is to investigate at how film compositions affect the
production of fresh produce films for humidity control in crispers with increased
temperature sensitivity for gas permeability. Shape-memory ...