• Designing a Hybrid Aeroelastic Energy Harvester for Self-Powered Applications 

  CHAUDHARY, AMIR MUNIR (College of Electrical & Mechanical Engineering (CEME), NUST, 2025)

  This study presents the concept of energy harvesting (EH) from Vortex-Induced Vibrations (VIVs) by employing two different transduction mechanisms (piezoelectric and sliding mode triboelectric), under the effect of axially ...
• Low-velocity impact behavior assessment of 3D printed sandwiched structure with varying infill patterns 

  Abbas, Muhammad (College of Electrical & Mechanical Engineering (CEME), NUST, 2025)

  Low-velocity impact behavior poses a significant challenge to the structural integrity of 3D-printed sandwich composites, often leading to damage mechanisms such as fiber failure, matrix cracking, and delamination. ...
• Investigation of Erosion Mitigation Using 3D Printed Twisted Tape Insert 

  Subhani, Hammad (College of Electrical & Mechanical Engineering (CEME), NUST, 2025-01)

  The aim of this research is to assess the applicability of the 3D printed twisted tape inserts for reducing erosion in pipe system under liquid-solid and liquid-solid-gas flows, a major problem in industrial environment ...
• LEVERAGING PHYSICS-INFORMED NEURAL NETWORKS FOR BIFURCATION ANALYSIS IN THERMO-FLUID CONVECTION: PREDICTING MULTICELLULAR FLOW IN HIGH-ASPECT RATIO CAVITIES 

  Adnan, Muhammad (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)

  Thermo-fluid convection is a phenomenon observed across various spatial scales, from large-scale ocean currents to small, enclosed cavities, such as those found in insulating glazing units (IGUs). In these systems, ...
• SURFACE ANALYSIS OF CHEMICAL CONVERSION AND NICKEL CHROME COATINGS ON ASTM-A516 GRADE-70 

  Ali, Raza (College of Electrical & Mechanical Engineering (CEME), NUST, 2024-10)

  In this experimental based research study, Chemical conversion coating, Chromium (Cr) and Nickel (Ni) electroplating techniques are being used to deposit anti-corrosion protective layers on ASTM-A516 Grade 17 Steel, which ...
• Numerical Analysis and Performance Evaluation of a Flapping Airfoil in the Wake of a Bluff Body 

  Khan, Amir (College of Electrical & Mechanical Engineering (CEME), NUST, 2024-10)

  This thesis investigates the vortex interactions between a flapping airfoil and an oscillating cylinder, focusing on how the upstream cylinder’s presence influences the airfoil’s thrust performance as it moves through the ...
• Performance Assessment of Mechanical Properties of 3D Printed ABS 

  BASHIR, MUHAMMAD ATHAR (College of Electrical & Mechanical Engineering (CEME), NUST, 2024-10)

  This research examines the mechanical characteristics of 3D-Printed Acrylonitrile Butadiene Styrene (ABS) produced through the Fused Deposition Modeling (FDM) technique. ABS was selected due to its widespread use, strength, ...
• OPTIMIZATION OF GALLOPING-BASED ENERGY HARVESTER USING NON-LINEAR MAGNETIC FORCE 

  Tahir, Shahzaib (College of Electrical & Mechanical Engineering (CEME), NUST, 2024-09)

  This study compares the performance of a galloping-based energy harvester working in both bi-stable and mono-stable conditions. For this reason, an axially attached prismatic body having a square cross-section is considered ...
• Performance Assessment of Modular Truss Bridge under Static Loading conditions 

  Khan, Saad Ullah (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)

  Bailey bridges have an elevated position in bridge design and bridge service history with everlasting impact on current bridge design formats. With commendable service in military domain, they are an economical alternative ...
• Comparative Analysis of Monostable and Bistable Energy Harvester working under Vortex Induced Vibrations (VIV) 

  Khalid, Talha Bin (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)

  An efficient, eco-friendly energy generation approach has increased the potential development of harvesting wind energy via a piezoelectric transduction mechanism, which can be a feasible replacement for conventional ...
• Design and Development of Power Generation System for Thermo-Acoustically Driven Devices 

  Muhammad Zeeshan Ur Rehman (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)

  This research ventured into the forefront of power generation, exploring the innovative field of thermo-acoustic devices and placing a specific emphasis on crafting a robust system. Against the backdrop of escalating ...
• Design and Fabrication of Semi-automatic Toroidal Electromagnetic Coil Winding Machine 

  PROJECT SUPERVISOR SAHEEB AHMED KAYANI, USMAN GHAFOOR M.SHAHZAIB BALOCH TAHA FERAS (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)

  The Design and Fabrication of Semi-automatic Toroidal Electromagnetic Coil Winding Machine project aims to develop an innovative solution for efficiently winding toroidal electromagnetic coils. This project was undertaken ...
• DESIGN AND FABRICATION OF A PRECISION FIN ACTUATION CONTROL SYSTEM USING LEAD SCREW 

  PROJECT SUPERVISOR Assistant Professor Saheeb Ahmad Kayani, NS Muhammad Umair Khalid NS Qasim Ali (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)

  Lead screws are mechanical components that are widely used for linear motion control applications in various fields. They are commonly used in systems such as syringe pumps and pan-and-tilt systems for security cameras. ...
• DESIGNANDANALYSISOFSHOCKABSORBER 

  PROJECTSUPERVISOR Dr.NAVEED AKMAL DIN, NS MUHAMMAD ABDUL WAHAB KHAN NS SAIF UR RAHMAN FAISAL (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)

  There is an ever-increasing demand for automobiles. In today's rapidly evolving world, the automotiveindustry is driven bythepursuit ofenhanced efficiency and performance, leading totechnologicaladvancements.Onecrucialas ...
• MODELING AND FABRICATION OF A SOLAR BASED ORC SYSTEM FOR STANDALONE APPLICATION 

  PROJECT SUPERVISORS LEC USMAN ZIA DR. ABDUR REHMAN MAZHAR, MUHAMMAD TALHA JAHANGIR SHABAHAT HASNAIN QAMAR OSAMA ASLAM ABDUL REHMAN (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)

  The purpose of this thesis was to examine the feasibility and performance of a solarbased Organic Rankine Cycle (ORC) for power generation. The study focused on employing solar irradiation as the heat source for driving ...
• Digital Twin for Condition Monitoring 

  PROJECT SUPERVISOR AND CO-SUPERVISOR DR. IMRAN AKHTAR, ASHHAD ALI SHAHID TABREZ ASIF DAWOOD HAIDER KHAN M. YOUSUF EISA DR. ZAFAR ABBAS BANGASH (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)

  A digital twin is an enhanced digital representation of a real system. Digital twins can mimic the operation of physical systems and use data captured from their sensors to detect abnormal conditions and diagnose the cause ...
• Design and Fabrication of Trans-Wing RC Plane 

  PROJECT SUPERVISOR DR. RASHID NASEER, PC MUHAMMAD RIZWAN AKHTAR ASC HAMZA ASC ALEEM AKHTAR ASC AURANG ZEB SHADAB (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)

  Remote-controlled (RC) planes have been a popular hobby for decades, providing a fun and engaging way to learn about the principles of heavier-than-air flight. In recent years, advances in technology have also enabled the ...
• Design and Manufacturing of a Low-Cost Automated Misting System for Produce 

  PROJECT SUPERVISOR Dr RASHID NASEER CO-SUPERVISOR Dr ZAFAR BANGASH, NS JABEER ASGHAR NS HAFIZ ABDULLAH MUBEEN NS ALINA AZAM AWAN NS ADEEL AJMAL KHAN (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)

  One-third of the food produced worldwide each year is lost or wasted, which results in both a financial loss and the waste of all the natural resources necessary for food production, processing, packaging, transportation, ...
• Design, Analysis and Fabrication of Leading Edge Tubercles (let) on Vertical Axis Wind Turbine Blade 

  PROJECT SUPERVISOR DR. TARIQ TALHA, HAROON UMER ABDULLAH AHSAN SAEED (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)

  The project analyzes the effect of Leading Edge Tubercle (LET) on a vertical-axis wind turbine. The Leading Edge Tubercles tend to decrease the wake region in a stream- lined body, resulting in reduced drag and avoid stall ...
• Design, Analysis and Optimization of Bladeless Fan 

  PROJECT SUPERVISOR DR TARIQ TALHA, NS BILAL ABDULLAH ASC HAMMAD MUSTAFA PC HASNAIN BADAR NS MAHTAB UL DIN (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)

  The conventional ceiling fan employs fan blades to facilitate air distribution in the surrounding area, thereby inducing a cooling effect within the room. However, this airflow generates unpleasant noise resulting from the ...

View more