MS: Recent submissions

  • TIME AND FREQUENCY SYNCHRONIZATION IN ORTHOGONAL FREQUENCY DIVISION MULTIPLEXING (OFDM) SYSTEMS 
    AHMAD, AITZAZ (College of Electrical & Mechanical Engineering (CEME), NUST, 2008)
    Orthogonal Frequency Division Multiplexing (OFDM) has attracted tremendous attention in the last few years particularly in applications that require high data rates to be supported under fading channels. OFDM has an ...
  • PERFORMANCE IMPROVEMENT OF DYNAMIC SOURCE ROUTING (DSR) PROTOCOL FOR MOBILE AD-HOC NETWORKS (MANETS)THROUGH HYBRIDIZATION DEPTH 
    AWAN, IMRAN AHMAD (College of Electrical & Mechanical Engineering (CEME), NUST, 2008)
    PERFORMANCE IMPROVEMENT OF DYNAMIC SOURCE ROUTING (DSR) PROTOCOL FOR MOBILE ADHOC NETWORKS (MANETS) THROUGH HYBRID DEPTH By IMRAN AHMAD AWAN Mobile ad-hoc Networks (MANETs) are becoming increasingly popular as a ...
  • LONG HAUL OPTICAL FIBER TRANSMISSION THROUGH DQPSK MODULAITON 
    Unknown author (College of Electrical & Mechanical Engineering (CEME), NUST, 2008)
    In this report, a SIMULINK model has been proposed for the optically amplified DWDM optical transmission system. Given that the demands of ultra-wideband transmission over the Internet, transmission techniques are now ...
  • SIMULATION AND IMPLEMENTATION OF A ROBUST DIRECT SEQUENCE SPREAD SPECTURM COMMUNICATION SYSTEM 
    SALEEM, SAJID (College of Electrical & Mechanical Engineering (CEME), NUST, 2008)
    Reed Solomon codes form an important class of linear cyclic block codes with numerous applications in communications and data storage. This thesis involves investigation and Hardware Description Language (HDL) implementation ...
  • REDUCTION IN OSCILLATION OF A SUSPENDED LOAD IN OVERHEAD CRANES 
    ILYAS, TAHIR (College of Electrical & Mechanical Engineering (CEME), NUST, 2008)
    REDUCTION IN OSCILLATION OF A SUSPENDED LOAD IN OVERHEAD CRANES By Tahir Ilyas Movement of heavy loads using overhead cranes is a very important process in industry. Moving a suspended load causes undesirable swings ...
  • DESIGN AND FABRICATION OF SWITCH MODE POWER SUPPLY FOR SOPHIE THERMAL IMAGER 
    SAWAL, ASAD SABIR (College of Electrical & Mechanical Engineering (CEME), NUST, 2008)
  • DESIGN OF HIGH SPEED HIGH VOLTAGE CAPACITOR CHARGING SWITCH MODE POWER SUPPLY 
    GHANI, RASHID (College of Electrical & Mechanical Engineering (CEME), NUST, 2008)
    Pulsed power applications like lasers, electronic beam welding etc require conversion of power at high voltages and at high switching speed. Numerous methods and topologies are available for tackling the requirement but ...
  • TARGET LOCALIZATION USING RETICLE SEEKER 
    HASSAN, NIDA (College of Electrical & Mechanical Engineering (CEME), NUST, 2008)
    Reticle systems, which are widely used in IR seekers, are considered to be a classical approach for estimating the target position within the specified field of view. In this thesis, a thorough study has been made and ...
  • TARGET DETECTION IN LOW ENR 
    RAIS, MUHAMMAD MOAZ (College of Electrical & Mechanical Engineering (CEME), NUST, 2007)
    MULTIPLE TARGET DETECTION IN LOW ENR MUHAMMAD MOAZ RAIS The problem of detection and identification of multiple low observable targets in a heavily cluttered environment is the primary focus of this thesis. The work ...
  • DESIGN OF A LOW SIDE LOBE SLOTTED WAVEGUIDE PLANAR ARRAY 
    DAR, SARA HAMEED (College of Electrical & Mechanical Engineering (CEME), NUST, 2007)
    Slotted waveguide antennas are very attractive for radar and communication applications. The design of these antennas require design curves, which relate electrical parameters of waveguide slots such as admittances and ...
  • SPACIO-SPECTRAL OBJECT DETECTION 
    BANO, SOPHIA (College of Electrical & Mechanical Engineering (CEME), NUST, 2007)
    This thesis describes a new technique for Spacio-Spectral Object Detection. The image is translated into its spacio-spectral information, which is 3 dimensional in case of grey scale image while for colored image its ...
  • HARDWARE IMPLEMENTATION OF REAL TIME OBJECT DETECTION AND TRACKING SYSTEM 
    ALI, USMAN (College of Electrical & Mechanical Engineering (CEME), NUST, 2007)
  • DIGITAL DRIVER PANEL OF TANK AL-KHALID 
    SHAHID, MUHAMMAD (College of Electrical & Mechanical Engineering (CEME), NUST, 2007)
    DIGITAL DRIVER PANEL OF TANK AL-KHALID By MAJOR MUHAMMAD SHAHID In Tank Al-Khalid, the present driver panel is purely an analog unit that displays various parameters of the tank on analog instruments. These instruments ...
  • COLOR BASED OBJECT MOTION DETECTION 
    LIAQAT, MUWAHIDA (College of Electrical & Mechanical Engineering (CEME), NUST, 2006)
  • VEHICLE SUSPENSION CONTROL SYSTEM USING FULL CAR MODEL.pdf 
    KHAN, UZAIR (College of Electrical & Mechanical Engineering (CEME), NUST, 2010)
    This study covers the complete control problem for the automotive industry. Based on the knowledge of vehicle suspension system its complete mathematical model is first established. The model utilizes 8 degrees of freedom ...
  • MICROWAVE SWITCHED BEAMFORMER FOR RECEIVER FRONT END.pdf 
    ASHRAF, MUHAMMAD AHMAD (College of Electrical & Mechanical Engineering (CEME), NUST, 2010)
    In this thesis ,we propose a microwave switched beamformer (MSBF) receiver design, which is a Microwave Beamforming technique, where the antenna elements signals are switched and corresponding phase shift is controlled. ...
  • ESTIMATION OF DIRECTION OF ARRIVAL (DOA) USING BEAMFORMING.pdf 
    BAIG, NAUMAN ANWAR (College of Electrical & Mechanical Engineering (CEME), NUST, 2010)
    Estimating the direction of arrival is an important task in different applications including radars, sonar and communications. Due to noise and interfering sources, accurate parameter estimation is a difficult task. By ...
  • HIGH DIRECTIVITY FRACTAL MICROSTRIP ANTENNAS.pdf 
    AWAN, ABBAS BIN YOUNAS (College of Electrical & Mechanical Engineering (CEME), NUST, 2010)
  • POWER OPTIMIZATION OF MULTIUSER CDMA BASED TACTICAL NETWORKS 
    ZEESHAN, MUHAMMAD (College of Electrical & Mechanical Engineering (CEME), NUST, 2010)
    Power Optimization of Multiuser CDMA based Tactical Networks Wireless communication systems which employ multiple access techniques require very sensitive management of the sources. This is the key requirement because ...
  • ANALYSIS OF WIDEBAND WAVEFORMS FOR JAMMING RESISTANCE 
    ULLAH, IHSAN (College of Electrical & Mechanical Engineering (CEME), NUST, 2010)

Search DSpace


Advanced Search

Browse

My Account