DSpace Home
→
E-Theses
→
CEME
→
Mechanical Engineering
→
MS
→
Recent submissions

MS: Recent submissions

Now showing items 201-220 of 256

Improved Technique for Frequency Limited Gramians based Model Order Reduction of 2D Systems

Sammana Batool (CEME-NUST-National Univeristy of Science and Technology, 2017)

Derivation of a mathematical system is a crucial parameter for design, analysis and simulation of dynamic system. Higher order complex models are obtained, while deriving from physical systems. These models are represented ...
A Framework for Evaluation of Biomedical Ontologies based on Structural Components

Samiullah Khan (CEME-NUST-National Univeristy of Science and Technology, 2015)

Biomedical ontologies are being developed in a large amount since the last decade. Recently, due to abrupt expansion in biological data and knowledge in the form of biomedical ontologies, the attention of their usefulness ...
A Neural Network Based Control for Semi-Active Suspension of Military Truck 5 Ton Hino GT

Salman Zafar (CEME-NUST-National Univeristy of Science and Technology, 2018)

The basic objectives of the suspension system include to not only support the weight of the vehicle, but also to improve ride comfort and vehicle handling. In conventional (passive) suspensions, there is a trade-off among ...
FE Modeling of Interacting Indentation, Flexural and Delamination Damage in Lap Joints of Composites

Salman Khalid (CEME-NUST-National Univeristy of Science and Technology, 2016)

Composite lap joints are essential for various applications such as aircraft wings, piping networks, sporting equipment and civil engineering works. The low velocity impact on such joints is a common occurrence in real ...
Design Of Pressure Vessel : A Comparative Study Between Code Vs Analysis Approach

Salman Ahmed Qureshi (CEME-NUST-National Univeristy of Science and Technology, 2015)

Pressure vessels are most widely used in industrial machinery contributing as main components for proper functioning of any mechanical system. Primitive purpose of these containers is storage. This includes preservation ...
Design of Universal Joints for Heavy Loads

Khan, Muhammad Raza Ahmed (CEME, National University of Sciences and Technology, Islamabad., 2018)

Rotation requirement of joint is in two directions. It will replace three jacks of a leveling tripod with two jacks to reduce complexity. A joint with 2 DOF capability will be designed and developed for experimentation. ...
Numerical Analysis On Crashworthiness Design of Thin Walled Columns Under Dynamic Impact Loading Conditions

Sajjad Hussain (CEME-NUST-National Univeristy of Science and Technology, 2020)

Transportation and automobiles have become a part of our daily lives and the risks associated with them of unwanted collision have also increased with automobiles being manufactured at a very high level all over the world. ...
Trajectory Generation and Tracking for UAV Landing

Muhammad Sharjil (CEME, National University of Sciences and Technology, Islamabad, 2010)

Landing is the most critical phase of aircraft flight and poses vulnerability. Automatic landing offers an added safety by minimizing undue human errors during this critical flight phase. Unmanned Air Vehicle reduces ...
Complexity Analysis of Assembly Systems

Sadaf Afreen (CEME-NUST-National Univeristy of Science and Technology, 2017)

In today’s market there is a lot of competition. Companies have to respond to the quick market changes in order to keep going with the flow. There is rapid change in the market demand so, in order to cope up with this ...
A Machine Learning Framework for Improving Diagnosability of a Reconfigurable Manufacturing System

Muhammad Faisal Rana (CEME, National University of Sciences and Technology, Islamabad, 2019)

Reconfigurable Manufacturing Systems (RMS) effectively respond to fluctuating market needs and customer demands for finished product. Diagnosability is a supporting characteristic of RMS that has a say in the quality of ...
Optimization of Energy Harvesting Potentials of Flow Induced Vibrations For Micro Power Generation

Muhammad Hanzalah Shahid (CEME, National University of Sciences and Technology, Islamabad, 2019)

In this study introduction of ns on a blu trapezoid is studied and an optimized tail length is sought to ensure that the maximum possible energy is extracted from the ambient environment.Existing research in regards ...
Feature clustering based approach for generation of reconfigurable machining process plan with kinematic configuration

Muhammad Ameer (CEME, National University of Sciences and Technology, Islamabad, 2018)

Reconfigurable manufacturing systems (RMS) found a novel manufacturing model of mass customization and co-evolution and are measured as the prospect of manufacturing because of their variable and adjustable nature. As the ...
Fatigue Analysis and Life Assessment of Pressurized Structures

Muhammad Faseeh Tahir (CEME, National University of Sciences and Technology, Islamabad, 2018)

One of the common practices used in the industry for safe operation of in-service components is to assess the fitness for service of the components during the service life. A Fitness for service assessment is required ...
Thermal Design and Analysis of Static Chamber Microfluidic Device

Raza, Mohsin (CEME, National University of Sciences and Technology, Islamabad., 2019)

Infectious diseases constitute a major cause of disease burden and more than half a billion Disability -Adjusted Life Year’s (DALYs) and millions of deaths each year. They have large effect on children under 5 years of age ...
Framework for Part Families Associated with Setup Sequence based Similarity in Cellular / Reconfigurable Manufacturing System

Muhammad Ali (CEME, National University of Sciences and Technology, Islamabad, 2016)

The configurations of Reconfigurable Manufacturing System (RMS) evolved around market requirements and corresponding manufacture capabilities, exploiting all available resources. Similar products / parts families are grouped ...
Automatic Spot Welding Feature Recognition from Step Data

Kiani, Muhammad Ali (CEME, National University of Sciences and Technology, Islamabad., 2019)

In design and manufacturing many systems are used to manage technical product data. Each system has its own data formats so the same information has to be entered multiple times into multiple systems leading to redundancy ...
Development of Zero-Backlash Servo Actuator

Saeed, Mudasar (CEME, National University of Sciences and Technology, Islamabad., 2018)

The constantly increasing demand placed on industrial machine tool manufacturer for great speed and accuracies, Ball screw actuators have potential of meeting these higher demands. Design and development of the zero backlash ...
Feature clustering based approach for generation of reconfigurable machining process plan with kinematic configuration

Ameer, Muhammad (CEME, National University of Sciences and Technology, Islamabad., 2018)

Reconfigurable manufacturing systems (RMS) found a novel manufacturing model of mass customization and co-evolution and are measured as the prospect of manufacturing because of their variable and adjustable nature. As the ...
Micro Scanning Stage Design with Actuator

Rehan Ahmed Sheikh (CEME-NUST-National Univeristy of Science and Technology, 2018)

XY Precision stages forming technology in the domain of micro motion. The aim of this project is to design and develop micro scanning stage to increase the resolution of an imaging detector. To achieve the desired goal, ...
Framework for Part Families Associated with Setup Sequence based Similarity in Cellular / Reconfigurable Manufacturing System

Ali, Muhammad (CEME, National University of Sciences and Technology, Islamabad., 2016)

The configurations of Reconfigurable Manufacturing System (RMS) evolved around market requirements and corresponding manufacture capabilities, exploiting all available resources. Similar products / parts families are grouped ...

Now showing items 201-220 of 256

Search DSpace

Advanced Search

Browse

All of DSpace
This Collection
- By Issue Date
- Authors
- Titles
- Subjects

Recently added

MS: Recent submissions

Search DSpace

Browse

All of DSpace

This Collection

My Account