• DESIGN AND FABRICATION OF SHELL AND TUBES HEAT EXCHANGER WITH DIFFERENT BAFFLE DESIGNS 

  Farhad Ali; Tariq Amin Dr. (NUST CAE, 2025)

  This study investigates the design and thermal hydraulic performance of the shell and tubes heat exchanger using zonal baffle configurations. Simulations were carried out using ANSYS Fluent to evaluate the thermal performance ...
• Detection and Characterization of Defects in a Composite / Metal Structure Through Augmented NDE Techniques 

  SHAN UL HAQ (NUST CAE, 2024)
• DEVELOPMENT OF HEAVY LIFT DRONE PLATFORM FOR VARIOUS PAYLOADS 

  Hafiz Muhammad Shuaib Arshad (NUST CAE, 2024)
• COMBUSTION AND HEAT TRANSFER ANALYSIS OF BI-DIRECTIONAL VORTEX ENGINE 

  Amber Ilyas; Amber Ilyas (NUST CAE, 2024)
• Development and Characterization of Hybrid MultiFunctional Structures Through Friction Stir Additive Manufacturing (FSAM) for Aerospace Applications 

  JAWAD AHMED (NUST CAE, 2024-11-01)
• Design and Optimization of Hybrid Passive Flow and Noise Control Method for Airfoil / Wing 

  Mohsin Ali (NUST CAE, 2024-11-01)
• Comparison of Deformation Mechanism in a High Entropy Alloy and a Conventional Alloy 

  HamzaLiaqat; Syed Saad Javaid Dr. (NUST CAE, 2024)
• DESIGN AND DEVELOPMENT OF ENTROPY GENERATOR FOR MEMS APPLICATION MS-15 

  Muhammad Aqib Zulfiqar; Zahid Ahmed Qureshi Dr. (NUST CAE, 2024)
• Design, Development and Prototype Fabrication of Vertical Takeoff and Landing Hybrid Unmanned Aerial Vehicle 

  Syed Hammad Raza; Dr. Farooq Bin Akram (NUST CAE, 2024)
• DESIGN VERIFICATION, PROTOTYPE FABRICATION, AND EXPERIMENTAL TESTING OF HYBRID VERTICAL AXIS WIND TURBINE 

  Muhammad Atif (NUST CAE, 2024)
• A NOVEL APPLICATION OF LOCK-IN THERMOGRAPHY FOR IDENTIFICATION OF DEFECTS IN AIRCRAFT STRUCTURES 

  Zia ul Islam (NUST CAE, 2023)
• Comparisonof Deformation Mechanism in a High Entropy Alloy and a Conventional Alloy 

  Dr. SyedSaadJavaid (NUST CAE, 2023)
• DESIGN AND DEVELOPMENT OF ENTROPY GENERATOR FOR MEMS APPLICATION 

  Muhammad Aqib Zulfiqar (NUST CAE, 2023)
• AUTONOMOUS LANDING ALGORITHM DESIGN WITH CROSSWIND EFFECTS FOR MANNED/UNMANNED AIRCRAFT 

  Sawaiba, Khush Bakhat (NUST CAE, 2023-10)

  Autonomous flight complements the pilot’s strategic decision-making capability in emergencies and keeps him focused on his mission especially, in aircraft takeoff and landing phases. Landing is the critical phase of flight. ...
• Numerical Investigation of the Effect of Morphing on the Energy Harvesting Performance of a Flapping Foil 

  Abban Khatri, Furqan (NUST CAE, 2023-10)

  Nowadays we have seen a drastic increase in the number of catastrophic natural disasters. According to a recent survey, only in 2022, the total number of natural disasters was 430, more than 1 per day for the entire year. ...
• Development and Characterization of Metal-CFRP Additively Manufactured Multi-Material Structures 

  Ahmad, Waseem (NUST CAE, 2023-09-25)

  Additive manufacturing (AM) or 3D printing has revolutionized the manufacturing industry through its rapid and geometrically-intricate capabilities as well as economic benefits. One of the applications for AM is the ...
• Development of an Artificial Intelligence based Framework for Flight Data Analysis 

  Wadood, Aamir (NUST CAE, 2023-09)

  Modern aircraft are embedded with numerous sensors that record and store data from various systems of the aircraft. With the increase in the data volume, stakeholders have understood the need for advanced data analysis ...
• DESIGN AND DEVELOPMENT OF ELECTRO- MECHANICAL ACTUATOR AND RETRACTION CONTROL UNIT FOR AIRCRAFT LANDING GEAR SYSTEM 

  Muhammad Qasim, Tauqeer ul Islam Prof dr. (NUST CAE, 2023)

  In this research, the detailed literature review was initially performed to replace conventional Hydraulic System Actuator (HAS) in Main Landing Gears (MLGs) with electric based actuators for lightweight aircrafts. The ...
• Characterization of Failure Modes of 3D Printed CFRP/Al Riveted Joint Under Varying Loading Conditions 

  Sabih Ahmad Khan; Haris Ali Khan, Dr Aerospace Engineering Department (NUST CAE, 2023)

  This research is focused on investigating the mechanical behavior of FDM-processed CFRP/Al hybrid riveted joints at elevated temperatures. A two-pronged approach was adopted entailing experimental and computational ...
• DESIGN, ANALYSIS, FLIGHT DYNAMICS MODELING, SIMULATION AND CONTROL OF VTOL HYBRID UNMANNED AERIAL VEHICLE 

  Farooq Bin Akram Dr, Muhammad Rehan (NUST CAE, 2021)

  This research is focused on the design, analysis, flight dynamics modeling, and control of a VTOL hybrid UAV. A detailed study was conducted to analyze the design philoso phies, analysis techniques, flight dynamics modeling, ...

View more