• Investigation on Designing High Gain Beam Tilting Antenna using Magneto Electric Dipoles 

  Khurram, Muhammad (School of Electrical Engineering and Computer Science (SEECS)NUST, 2025)

  In this modern era, Militaries are equipped with advanced communication equipment’s to conduct the intense communication activities by using satellite radio, antennas, Global Positioning System ‘GPS’, handheld sets, Inmarsat, ...
• Service Delay Optimization in Mobile Edge Computing-enabled Wireless Networks 

  Abbas, Syed Zain (School of Electrical Engineering and Computer Science, (SEECS)NUST, 2024)

  As vehicular networks increasingly rely on real-time applications such as autonomous driving and intelligent transportation systems (ITS), Mobile Edge Computing (MEC) has emerged as a crucial technology for reducing ...
• Real-time and On the Edge Deforestation Detection 

  Munir, Muhammad Ali (School of Electrical Engineering and Computer Science, (SEECS)NUST, 2025)

  Deforestation is one of the most challenging issue that we are dealing with as of today. The effects of complete deforestation have started to show up so now governments and authorities have started to take firm measures ...
• Improve Image Matching Pipeline Using Model-Based Approach 

  Rehan, Muhammad (School of Electrical Engineering and Computer Science (SEECS-NUST), 2024)

  Image matching is one of many fundamental tasks in computer vision with a wide range of applications, including image registration, camera pose estimation and 3D reconstruction. Traditional image matching techniques ...
• DESIGN OF HIGH-EFFICIENT POLARIZATION CONVERSION METASURFACE 

  Ashfaq, Kiran (School of Electrical Engineering and Computer Science (SEECS)NUST, 2025)

  Metasurfaces are artificially engineered structures that are proposed to employ the phase, amplitude, and polarization of the electromagnetic (EM) wave. Among many properties, polarization conversion of the EM wave is the ...
• A State-Space Estimation and Control of Power System Oscillations 

  Khan, Waqas Ali (School of Electrical Engineering and Computer Science (SEECS)NUST, 2025)

  Inter-area oscillations provide a considerable risk to the stability of interconnected power networks, as they involve generators from many regions, potentially resulting in intensified oscillations in tie-lines. The ...
• GRAPHENE BASED RIS FOR THZ WIRELESS COMMUNICATION 

  Ahmed, Azib (SEECS NUST, 2024)

  FIGURE 1: SPECTRUM SHOWING THE TERAHERTZ REGION 8 FIGURE 2: META-SURFACE 25 FIGURE 3: GRAPHENE 27 FIGURE 4: POSSIBLE REAL-WORLD SCENARIOS OF THZ-ENABLED DRONE NETWORK 30 FIGURE 5: GRAPHENE DESIGN 36 FIGURE 6: UNIT ...
• Enhancing Realism in Simulators using Generative AI Models 

  Khalid, Muhammad Abdullah (School of Electrical Engineering and Computer Science (SEECS) NUST, 2024)

  In robotics, simulations are crucial, especially during the testing stage. However, the sim2real gap remains a concern. For example, object segmentation learned on simulators may not translate well on real world data ...
• FRACTURE ANALYSIS OF BONE MODELS USING MICROSTRIP PATCH ANTENNAS 

  Arbie, Qamar Abbas (School of Electrical Engineering and Computer Science National University of Sciences & Technology NUST, 2025)

  Bones are a crucial component of the human skeletal system, providing structure support, and protection for internal organs and serving as an anchor point for muscles. There are different types of bones in the human body, ...
• Design and Development of Chaotic Cavity Coupled with Rotman Lens-based Multiplexer/Demultiplexer for DoA Estimation 

  Haseeb, Javaria (School of Electrical Engineering and computer and Computer Science (SEECS) NUST, 2024)

  Along with increase in data rates, fast and accurate channel characterization at millimetre-wave (mmWave) frequencies is a critical requirement. The direction of arrival (DoA) is one of the basic parameters in channel ...
• Multifaceted Crop Health scouting based on Farmbot and Machine Vision 

  Sajjad, Noor (School of Electrical Engineering & Computer Science (SEECS) NUST, 2024)

  In the field of precision agriculture, integration of multi-modal data sources such as soil Nitrogen- Phosphorus-Potassium (NPK) sensors with high-resolution RGB and infrared imagery is essential for improving crop ...
• Fast Transient Dual Mode Low Dropout Regulator for Power Management in SoCs 

  Qaisar, Shirin (School of Electrical Engineering and Computer Sciences (SEECS), NUST, 2024)

  This work presents an Analog-assisted Fast-transient Digital Low Dropout (LDO) regulator for power management systems through an innovative integration of Analog and Digital control loop methodologies. The design contains ...
• Synthesizable Digital LDO with Adaptive Gain Control Suitable for Microprocessor SoCs 

  Farooq, Muhammad Haris (School of Electrical Engineering and Computer Sciences (SEECS), NUST, 2024)

  Power management is a critical aspect of modern microprocessor-based systems-on-chips (SoCs), which are at the heart of applications like mobile devices, embedded systems, and high-performance computing platforms. As ...
• High-Throughput Impedance-Measurement IC using Periodic Integration Technique 

  Ellahi, Karam (School of Electrical Engineering and Computer Sciences (SEECS), NUST, 2024)

  Electrical impedance tomography (EIT) is a non-invasive and radiation-free imaging technique used to create impedance images of a target area. It has been successfully applied in various biomedical applications, including ...
• Advancing Medical Image Segmentation through Transformer-Enhanced Algorithms and Dataset Integration 

  Salim, Ahmed Suleman (School of Electrical Engineering and Computer Science,(SEECS) NUST Islamabad, 2024)

  In an era marked by a rising prevalence of health issues, the significance of a reliable and efficient system for disease detection is a need. With the successful integration of Transformer models in computer vision, ...
• Design and Development of GNSS Receiver for Challenging Environment 

  Malik, M Hassan Sajjad (School of Electrical Engineering and Computer Science, (NUST), 2024)

  The Global Navigation Satellite System (GNSS) is comprised of four major constellations, i.e. GPS, BeiDou, GLONASS and Galileo. GNSS technology is used to compute position, velocity and time (PVT) information of the receiver. ...
• Edge-Optimized Deep Learning Framework for Dynamic Unmanned Vehicles Detection and Tracking 

  Abu Bakar, Aqsa (Electrical Engineering in School of Electrical Engineering & Computer Science, (SEECS), NUST, 2024)

  The increasing prevalence of drones alongside security threats related to these in various sectors, including military, surveillance, and delivery, has underscored the urgent need for advanced drone detection and ...
• Multi-Objective Optimization of Quadcopter Attitude and Position Control via Sliding Mode and TST-SMC 

  Sultana, Maryam (School of Electrical Engineering & Computer Science (SEECS), NUST, 2024)

  Quadcopters have garnered significant interest within the UAV community due to their wide-ranging applications in both military and civilian sectors. This study presents op timized controllers designed for precise regulation ...
• Advance Control Technique for Magnetic Levitation Train 

  Khan, Rizwan Ahmad (School of Electrical Engineering and Computer Science, (SEECS) NUST, 2024)

  The thesis is based on the design of advanced control techniques for Maglev system, the key purpose of this research is to plan an effective control strategy to deal with nonlinear dynamics of Maglev system, that includes ...
• Design and Analysis of Magneto-Electric Dipole Antennas for Base Station Applications 

  Sameer, Linta (School of Electrical Engineering and Computer Science, (SEECS) NUST, 2024)

  The Magnetoelectric Dipole (MED) Antenna is a complementary type of antenna that contains both magnetic and electric dipoles. This type of antenna radiates a symmetrical radiation pattern formed by combining the ...

View more