Browsing NICE (SCEE) by Title

1-D FLOOD MODELLING AND SENSITIVITY ANALYSISUSING HEC-RAS

Umar Irshad (NICE SCEE, National University of Sciences and Technology, Islamabad, 2017)

Due to the recurrent occurrence of major floods around the world, several alerts methods have been developed to reduce the risk and damage. In this context, hydraulic modelling can certainly provide reliable and accurate ...

1D / 2D Flood Modelling of River Indus: Guddu – Sukkur Reach

Muhammad Faisal Arif (NICE SCEE, National University of Sciences and Technology, Islamabad, 2017)

Floods are one of the worst natural hazards being face by mankind, bring infrastructure devastation and are also responsible for loss of human life. Pakistan, since its creation, has faced the challenge of floods. However, ...

1D and 2D Coupled Hydrodynamic Model of Nullah Lai Flooding Using Saint -Venant Equations

Farman Ali Mirza (NICE SCEE, National University of Sciences and Technology, Islamabad, 2016)

Floods are among the most devastating natural hazards in the world causing huge losses of lives and infrastructure. Floods can be predicted but it‟s very hard to make its effects less severe. Flood can destroy human life, ...

2D FLOOD MODELLING AND SENSITIVITY ANALYSIS: A CASE STUDY OF TOUS DAM BREAK

Aftab, Ullah (NUST, 2022)

Worldwide Floods has been deemed as the most dangerous natural calamity impacting adversely the environment and society, claiming millions of lives and damaging the properties. Compared to other natural disaster like (forest ...

2D Simulation of Non-Uniform Sediment Transport in a Channel Bend in Unstready Flow

Daud, Muhammad (NUST, 2021)

The interest in rivers is as old as human civilization itself. The rivers seldom flow in a straight path and usually trace out in curved paths. An alluvial river is having the same bed material as the material it moves ...

3-D Free Surface Flow Modeling of a Channel Confluence using OpenFoam

Jawad, Muhammad Kashif (NUST, 2021)

Natural rivers usually have a main channel and a few tributaries. A confluence is the meeting of a tributary and the main channel. A typical phenomenon in many hydraulic engineering problems is the confluence of two streams. ...

3-D Numerical Modeling of Flow around a Circular Cylinder

Mohsin Raza (NICE SCEE, National University of Sciences and Technology, Islamabad, 2020)

Incompressible, steady state flow of water around a circular cylinder is studied using Volume of Fluid method (VOF). An Open source CFD model called OpenFOAM is used for the modeling and simulation. Two different cases ...

3D Elasto-plastic Seismic Numerical Modeling and Analysis of Masonry Arch Bridges

Muhammad Faisal Javed (NICE SCEE, National University of Sciences and Technology, Islamabad, 2013)

Pakistan is located on an earthquake prone area and old bridges were designed without any seismic provision. In the years (2005), tremors were felt in Pakistan due to the strong earthquakes at Kashmir, which highlight the ...

3D NUMERICAL MODELING OF DAM-BREAK FLOOD IN AN URBAN LOCALITY

Saleem, Muhammad Waqar (NUST, 2024-03)

This thesis presents a novel methodology for urban flood risk assessment, leveraging a state of-the-art 3D urban flood modeling technique. Utilizing the Volume of Fluid (VOF) method within ANSYS Fluent, this approach ...

Acceleration of Flood Modeling with a 2D Shallow Water GPU (Graphic Processing Unit Assisted Code)

Mahmood, Prince (NUST, 2021)

Flooding due to dam-break, excessive rainfall, and storm surge is a serious threatening hazard that can cause major disasters and economic losses. Also, there are significant chances of increase in the flooding and river ...

ACCESSIBILITY TO MEDICAL SERVICES FOR A LARGER AREA UNIVERSITY CAMPUS – A CASE STUDY OF NUST

Asif, Kinza (2022)

Transportation plays a vital role in daily lives of human beings. Its importance is more critical in case of emergency situations like accessibility to a medical service or a hospital. This study is focused on measuring ...

ACCIDENT ANALYSIS AND IDENTIFICATION OF BLACK SPOTS ON MOTORWAY (M-1) SECTION ISLAMABAD TO PESHAWAR

MUNAWAR SHAHZAD SHARIF (NICE SCEE, National University of Sciences and Technology, Islamabad, 2009)

Developing nations including Pakistan are faced with new dimension of highway safety challenges after the advent of motorways Safety management of motorways demand more meticulous addressal of safety issues due to involvement ...

ACCIDENT ANALYSIS AND IDENTIFICATION OF BLACK SPOTS ON NATIONAL HIGHWAYS (N-5) SECTION PESHAWAR TO ATTOCK BRIDGE

ASAD ALI (NICE SCEE, National University of Sciences and Technology, Islamabad, 2009)

The most common myth of accident being unavoidable is the bane of any society with National Highways being the prime example. Accidents can be unintentional and sometimes can be random but are generally found to occur or ...

ACCIDENT BLACK SPOTS IDENTIFICATION AND EVALUATION OF RAWALPINDI – JHELUM NATIONAL HIGHWAYS (N-5) SECTION

INAMULLAH KHAN (NICE SCEE, National University of Sciences and Technology, Islamabad, 2010)

Road safety is a major issue in Pakistan. It has been estimated that every year about 6 thousand persons are killed and more than 13 thousand are injured in road accidents. Road traffic injuries causes emotional, physical ...

Achieving Building Sustainability through Indigenous Building Materials

Chishti, Muhammad Awais Ali (NUST, 2017)

Due to increase in environmental issues, construction industry is continuously in search of materials that do not pose hazard to the environment. The aim of this study is to choose the best locally available material to ...

Achieving Optimal Residential unit for Low Cost Mas Housing in Developing Countries

Zaidi, Syed Danial Mehdi (NUST, 2021)

Low cost housing is a concept which deals with effective budgeting and following of techniques which help reducing construction cost using locally available materials along with improved skills and technologies without ...

Achieving Project Success Through Combined Management of Stakeholders-Scope-Communication

Ravish Masood (NUST, 2018)

Project success is a most commonly debated topic in project management, yet it is least agreed upon. A project is usually recognized as successful when it is completed on time, within budget, according to specifications ...

Adoption of Agile Performance Management in the Construction Industry for Project Success using System Thinking Approach

Saleem, Fatima (NUST, 2022)

Projects have become more complex over time. Therefore, projects with time delays and cost overruns are delivered in the construction industry. Project complexity is one of the reasons for poor performance. Complexity ...

The Adoption of Circularity in Modular Construction in Developing Countries Using System Dynamics Approach

Bukhari, Aban (SCEE,(NUST), 2024)

A country’s economic development fundamentally relies on its construction industry that is notably resource intensive and generates extensive amounts of waste leading to numerous environmental impacts. Wherefore, modular ...

Adoption of Green Building Practices in Pakistan: Barriers and Measures

Sana Azeem (NICE SCEE, National University of Sciences and Technology, Islamabad, 2017)

From previous researches, it has been observed that buildings are the prime consumer of world’s fresh water and energy. The way buildings are designed and constructed today has immense direct and indirect impact on the ...

Browsing NICE (SCEE) by Title

Browsing NICE (SCEE) by Title

Search DSpace

Browse

All of DSpace

This Community

My Account