Mechanical Engineering: Recent submissions

  • DESIGN, ANALYSIS AND DEVELOPMENT OF A QUADRUPED ROBOT 
    M Emaaz Azeem Jaffry Ibrahim Bin Ali Khan Irteza Ali Ahmed Faruqi Haseeb Altaf Qasim, supervised by Dr Sara Babar (SMME, 2022)
    Mobile robotics comprises a wide variety of locomotion, from drones to wheeled robots and even multi-legged robots that mimic the nature around us. There have been vast amounts of research and development in the drones ...
  • Design and Manufacturing of In-Process Grinding Gauge 
    Abdull Rehman Ali Faizan Raza Raees Ahmed Jaleel Aitazaz Ahsan, supervised by Dr Riaz Ahmed Mufti (SMME, 2022)
    The purpose of this project is to design and fabricate an in-process grinding gauge. This project is funded by Hybrid Engineering and will serve as proof of high-level capability of Hybrid Engineering. The gauge will be ...
  • ROLE OF THE NANO-PARTICLES INCLUSION IN THE STRUCTURAL INTEGRITY OF HONEYCOMB SANDWICH STRUCTURES 
    M Abdullah Yousaf Salman Abdullah Javed Wahaj Tariq Saad Ullah, supervised by Dr Adnan Munir (SMME, 2022)
    Engineering applications continue to draw interest in laminated structures made of sophisticated filamentary composite materials. Their key characteristics are their high strength-to-weight ratio and the ability to ...
  • VARIABLE RATE SPRAYER FOR UNMANNED GROUND VEHICLE 
    Hassan Daniyal Ghauri Laveeza Fatima Raja Humayoon Tallat Umair Ahmad, supervised by Dr Sara Babar (SMME, 2022)
    For many years engineers have tried to find a solution to optimize the dosage models of spray rate of PPP in orchards or gardens. Uniform application fails this use on multiple levels. The reasons are discussed below and ...
  • AIRBORNE ENERGY GENERATION SYSTEM 
    Syed Ammad Sohail Farzan Nabeel Rohail Ahmad Malik M Zarrar Mumtaz, supervised by Dr Waqas Khalid (SMME, 2022)
    An unquestionable fact is; we need more energy. This rhetoric very much implies that we need more energy sources, especially the ones that are clean, green, and renewable.
  • Counter Rotating Vertical Axis Wind Turbine 
    Roshaan Mahyyuddin Azeem Mubashir Hamza Ali Khan Shazim Khalid, supervised by Dr Emad-ud-din (SMME, 2022)
    The world is facing a power deficit with the supply of energy failing to meet the demand of consumers. This is largely due to the rapid depletion of non-renewable energy resources and is further compounded by the increasing ...
  • DESIGN AND DEVELOPMENT OF BARRIER TRANSFER SYSTEM 
    Muhammad Hashim Khan Muhammad Saad Sarah Zaidi Sjaa Mukhtar, supervised by Dr Aamir Mubashar (SMME, 2022)
    This report briefly describes the prevalent traffic and road conditions in Pakistan due to numerous reasons, including but not exclusive to overpopulation, inexperienced driving, low-quality roads, and lack of law ...
  • EMG TRIGGERED LOWER LIMB REHABILITATION DEVICE FOR STROKE PATIENTS 
    M Mutahar Imran M Saad Qureshi Mahin Mansoor Ahmad Zarrar, supervised by Dr Asim Waris (SMME, 2022)
    Stroke is becoming a common disease in elderly people which often leads to some functional disability, mainly affecting the stride and sometime in severe case it become permanent dysfunction. It affects one out of six ...
  • Autonomous Mobile Robot with ChainDriven Live Roller Top Module 
    Muhammad Ammar M. Moeed Ahmed M Abdullah Younas Khezar Qayyum, supervised by Dr Khawaja Fahad Iqbal (SMME, 2022)
    Robots that can navigate through their environment are termed mobile robots. Mobile robots are being utilized in various fields, such as agriculture, transport, package delivery, disaster recovery, military, surveillance, ...
  • DEVELOPMENT OF DRONE BASED SLAM 
    Jalal Hassan M Hamza Saleem Muhamamd Ahsan Huzaifa Hussain, supervised by Dr Jawad Khan (SMME, 2022)
    This research looks at how to merge two systems, SLAM and UAV. The key difference is that using the UAV attitude controller provides a constant starting value for the SLAM system, allowing the direct SLAM approach to ...
  • WANKEL ROTARY ENGINE 
    Bilal Aziz Nibras Salman Hareem Fatima Laiba Rehman, supervised by Dr Sami ur Rehman Shah (SMME, 2022)
    This paper emphasizes how Wankel Rotary Engine can potentially compete with the conventional Piston engine following its prime advantages over the competitor. Few of which include, the higher power output, greater torque ...
  • DESIGN AND DEVELOPMENT OF A BIPED ROBOT 
    Hassan Khalid Abdullah Zafar Ahmed Abdullah Shahid, supervised by Dr Yasar Ayaz (SMME, 2022)
    The RISE lab at SMME NUST has been continuously working on the research and development of robotics since its inception in the early 2000s. One of the major projects that has been worked on in the RISE lab has been the ...
  • Design of High-Speed Centrifugal Compressor for High-Speed Turbomachinery 
    M Adil Mumtaz M Usman Shafique M Usman khan M Mateen Ashraf, supervised by Mr. Abdul Naeem Khan (SMME, 2022)
    One of the most valuable type of compressors is centrifugal compressor. This project aims at the design of centrifugal compressor for a high-speed turbomachinery to meet certain objectives and requirements. Apart from the ...
  • DESIGN AND DEVELOPMENT OF A SELF-MODULATING LOW-COST NEONATAL VENTILATOR 
    Abdul Mohaiman Hassan Rana M Saad Ali Umar Zeeshan Ali Raza, supervised by Dr Najam Ul Qadir (SMME, 2022)
    The second decade of the 21st Century ended with what historians claim as the deadliest pandemic of the last 100 years. The world of 2020 witnessed the collapse of human society in every way possible. Be it health, hygiene, ...
  • Structural Analysis of Satellite Launch Vehicle for Aerospace Applications 
    M Faizan shabbir Ahmed naveed M Hamza daud Muhammad Waqas, supervised by Dr Niaz Bahadur Khan (SMME, 2022)
    Pakistan does not have its own satellite launch vehicle yet, so we are helping our industry to develop one. Our project “Structural Analysis of Satellite Launch Vehicle for Aerospace Applications” includes the aerodynamic ...
  • Vibrations Damping Glove for Parkinson’s disease 
    Raffay Mohammad Waseem Ali Asad Talha Rehman, supervised by Dr Jawad Aslam (SMME, 2022)
    Hand tremors have become increasingly widespread over the years. Although there are many causes of these tremors like Parkinson’s, anxiety etc. Essential Tremors are the most common cause. This neurological disorder causes ...
  • DESIGN AND DEVELOPMENT OF SWARM NETWORK FOR MONITORING AND SURVEILLANCE 
    Eesha Naeem Abdul Moiz Javed Arfa Eeman, supervised by Dr Muhammad Jawad Khan (SMME, 2022)
    Using UAVS, especially drones for monitoring and surveillance is much more efficient and reduces the response time by almost 44%. This project aims to design and develop a workable swarm system which can serve the purpose ...
  • AUTOMATED QUALITY CONTROL OF BISCUITS USING COMPUTER VISION 
    M Taimoor Shahzad M Hamza Qaisar Shaheer ahmad khan Kalsoom nazish, supervised by Dr Muhammad Usman Bhutta (SMME, 2022)
    This thesis is intended to describe the design and fabrication of a solution for Automated Quality Control of the Biscuits through Computer Vision. The project is aimed at providing an optimized solution for the quality ...
  • Design of Variable Rate Fertilizer Spreader for UAV 
    Muhammad hammad khilji Muhammad haziq hussain Muhammad uzair, supervised by Dr Zaib Ali (SMME, 2022)
    Precision Agriculture is a term which is widely used in the current 21st century, it means to implement the modern technologies, especially modern computing, artificial intelligence, satellite communication and drone ...
  • Design and Development of Chassis for Prototype Electric Vehicle with Steering and Drive System 
    Muhammad Uzair Asif Bashir ahmad M Hammad Hussain Ali arsal khan, supervised by Dr Mian Ali Ashfaq (SMME, 2022)
    All across the globe, general shift from Fossil Fueled Vehicles to Electric Vehicle is becoming more prominent by each passing day. As fossil fuel reserves deplete and fuel prices hike, advent of Electric Vehicles in ...

Search DSpace


Advanced Search

Browse

My Account