Mechanical Engineering: Recent submissions

  • Design and Fabrication of Food Dryer 
    Muhammad Ali Ammar ahmed Khizar Hayyat, supervised by Dr Zaib Ali (SMME, 2022)
    Pakistan has two major national strengths; the high rate of agricultural production and the solar irradiance that graces most of the country year-round. This project attempts to combine the two with a complementary technology ...
  • DESIGN AND MANUFACTURING OF HYBRID VERTICAL TAKEOFF AND LANDING (VTOL) UAV 
    Sameer bin khalid Aqib habib Usman shahid Muhammad salman azam, supervised by Dr Zaib Ali (SMME, 2022)
    The usage of UAVs has risen tremendously in recent years because of improved avionics and propulsion technology; nonetheless, there is a lot of demand to improve the range, endurance, speed, and ergonomics of UAVs. Neither ...
  • DESIGN, OPTIMIZATION AND FABRICATION OF VORTEX BLADELESS WIND TURBINE 
    Muhamamd Anas Muhammad Shehraz Rafiq, supervised by Dr Sadaqat Ali (SMME, 2022)
    Today, energy consumption is much more than energy production. Gone are the days when energy can be produced by carbon emission methods. Researchers have been studying energy harvesting from wind turbines for more than a ...
  • REFRIGERATION SYSTEM BASED ON VAPOR-ABSORPTION CYCLE WITH SOLAR POWERED GENERATOR 
    Muhammad Zia Ullah M Zain ul Abedin Irtaza asghar Umer zahid, supervised by Eng Abdul Naeem Khan (SMME, 2022)
    Energy is the life artery of the modern world and increasing CO2 emission represent a beginning of life‟s end, so the unique way for life continuity is more research in clean and renewable energy such as solar energy. One ...
  • Design and Fabrication of a maneuverable UGV targeting the Healthcare Industry 
    Muneeb afzaal Saim Omer Sami ullah Uzair Sohail, supervised by Dr Javaid Iqbal (SMME, 2022)
    The following report discusses the design of an Unmanned Ground Vehicle (UGV) which will enable it to cover rough and diverse tracks, specifically focused on urban terrains (inside of a building, stairs, etc.). The aim of ...
  • POWER GENERATION WITH VORTEX INDUCED VIBRATIONS 
    Muhammad shahzaibAsim Hafiz Muhammad Osama Khan Hassan Majeed A khund M Abdullah Hassan Malik, supervised by Dr Adnan Munir (SMME, 2022)
    The focus of the project is to develop a clean green source of energy production by utilising the renewable kinetic energy of a flowing body of water by incorporating a cylindrical structure that oscillates in the flow ...
  • DESIGN AND FABRICATION OF A ROADSIDE VERTICAL AXIS WIND TURBINE 
    Ahmed waleed Anas muzammil Muhammad hamza Sohaib nawaz, supervised by Dr Emad-ud-din (SMME, 2022)
    The report consists of a detailed discussion and tabulation of the final year project subjected to the Design and Fabrication of a roadside Vertical Axis Wind Turbine (VAWT) in the partial fulfillment of the bachelor‟s ...
  • ANALYSIS OF SAFETY OF A CNG CYLINDER UNDER IMPACT 
    Saba Khan, supervised by Dr Aamir Mubashar (SMME, 2022)
    The human mind has been working towards making the life of mankind more productive and easier. From the invention of wheels to bullet trains, man has found his curiosity to be the driving force behind so many inventions. ...
  • DESIGN AND DEVELOPMENT OF OXYGEN CONCENTRATOR 
    Malik Ahnaf Zahid Hafsa Rahmeen Ashhad naeem Ghazi Sanaullah, supervised by Dr Jawad Aslam (SMME, 2022)
    Form Chronic obstructive pulmonary disease, or COPD, as emphysema or chronic bronchitis, to the diseases such as pneumonia typhoid and more importantly the corona virus, or COVID 19, related complexities, patients always ...
  • DESIGN AND OPTIMIZATION OF WRIST ORTHOSIS 
    Ahmed Arslan Asgher Umer Ibtesam Afaq Ahmed Affan Shahid, supervised by Dr Aamir Mubashar (SMME, 2022)
    A Wrist Hand Orthosis functions as a mechanical, wearable medical device to support weak or damaged parts of the forearm, wrist, and hand, while it also serves to correct orthopedic maladjustments with both mobile and ...
  • Design and Development of a Mounted Corn Picker 
    Sajjad Ali Muhammad Ali Mehmood ayaz khan, supervised by Dr Rehan Zahid (SMME, 2022)
    This report aptly presents the work done on the Design and Development of the mounted Corn picker. Corn production is one of Pakistan’s major businesses which is very widespread. Owing to lack of technological advancements, ...
  • Energy Harvesting by Bio-Inspired Inverted C- Cylinders 
    Abdullah Tanveer, Supervised By Dr. Emad Uddin (SMME, 2022)
    In a uniform flow, the interaction of piezoelectric flag with bio inspired C shaped bluff bodies was examined. Based on vortex-induced vibration, the piezoelectric eel converts the kinetic energy of flowing water into ...
  • Hydrodynamic and Hydro acoustic analysis of marine Propeller 
    AMMAR NAZEER, Supervised by Dr NIAZ BAHADUR KHAN (SMME, 2022)
    A detailed hydrodynamic and hydro acoustic analyses of a four bladed marine propeller INSEAN E-779A was carried out in this study. Unsteady RANS model k-ω SST was used to assess the hydrodynamics of propeller, while acoustic ...
  • Analysis of Flapping Wings Micro Air Vehicle 
    MUHAMMAD ATTIQ UR REHMAN, Supervised by Dr EMAD UDDIN (SMME, 2022)
    Flapping Wings Micro Air Vehicles (MAVs) are incredible flyers. It is evident from the literature that flapping wings micro air vehicles have higher lift to drag ratio and higher power to weight ratio. Current study aims ...
  • EXPERIMENTAL STUDY OF THE EFFECT OF CORK POWDER INCLUSION ON STRENGTH OF DOUBLE STRAP JOINT AT ELEVATED TEMPERATURES 
    Zar Afshan, Supervised by Dr Aamir Mubashar (SMME, 2022)
    Adhesive joints are widely tested and investigated due to their pre-eminent mechanical properties. Different types of joints and adhesives are interest of researchers and engineers who strive to achieve maximum structural ...
  • Improving Overall Equipment Effectiveness of Cement Mills by applying Total Productive Maintenance 
    HANNAN YUSUF KHAN, Supervised by Dr WAQAS KHALID (SMME, 2022)
    Construction industry that consists of forty allied big and small industries have an important footprint in the Pakistan’s GDP growth. Cement industry is among the dominant industry that has recently seen a significant ...
  • Modelling and Energy Consumption Analysis of an Industrial Building, A case study in Pakistan 
    Salman Asif, Supervised by Dr Waqas Khalid (SMME, 2022)
    expansion of modern building sectors causes in the rise of energy devouring, specifically electrical energy consumption. The architectural expansion in field of industries, institutional buildings, hospitals, and IT parks ...
  • Portable Vacuum Forming Machine 
    Aaras Ahmed Bhatti, Supervised by Dr. Mian Ashfaq Ali (SMME, 2022)
    forming machines are widely used in the advertising industry for making 3D signage, packaging industry for packing different components such as plastic casing for headphones etc. and orthotics parts in the medical field. ...
  • Energy Harvesting from Unsymmetrical EEL in the wake of Solid Cylinders 
    Safeer Ahmad, Supervised by Dr. Emad Uddin (SMME, 2022)
    The purpose of this study is the energy harvesting by using piezoelectric eel behind two cylinders in side by side arrangement. The improvement in power generation by vibrations caused by vortices is studied by performing ...
  • Experimental Investigation of Particle Sorting Using Microfluidics Devices 
    Khola Ikram, Supervised by Dr Emad ud din (SMME, 2021)
    In the field of inertial microfluidics, particle movement causes various equilibrium positions in straight channels due to inertial effects. However, in terms of particle identification and sorting, this is not encouraging. ...

Search DSpace


Advanced Search

Browse

My Account