BS: Recent submissions

  • DESIGN AND MANUFACTURING OF HYBRID VERTICAL TAKEOFF AND LANDING (VTOL) UAV 
    Sameer bin khalid Aqib habib Usman shahid Muhammad salman azam, supervised by Dr Zaib Ali (SMME, 2022)
    The usage of UAVs has risen tremendously in recent years because of improved avionics and propulsion technology; nonetheless, there is a lot of demand to improve the range, endurance, speed, and ergonomics of UAVs. Neither ...
  • DESIGN, OPTIMIZATION AND FABRICATION OF VORTEX BLADELESS WIND TURBINE 
    Muhamamd Anas Muhammad Shehraz Rafiq, supervised by Dr Sadaqat Ali (SMME, 2022)
    Today, energy consumption is much more than energy production. Gone are the days when energy can be produced by carbon emission methods. Researchers have been studying energy harvesting from wind turbines for more than a ...
  • REFRIGERATION SYSTEM BASED ON VAPOR-ABSORPTION CYCLE WITH SOLAR POWERED GENERATOR 
    Muhammad Zia Ullah M Zain ul Abedin Irtaza asghar Umer zahid, supervised by Eng Abdul Naeem Khan (SMME, 2022)
    Energy is the life artery of the modern world and increasing CO2 emission represent a beginning of life‟s end, so the unique way for life continuity is more research in clean and renewable energy such as solar energy. One ...
  • Design and Fabrication of a maneuverable UGV targeting the Healthcare Industry 
    Muneeb afzaal Saim Omer Sami ullah Uzair Sohail, supervised by Dr Javaid Iqbal (SMME, 2022)
    The following report discusses the design of an Unmanned Ground Vehicle (UGV) which will enable it to cover rough and diverse tracks, specifically focused on urban terrains (inside of a building, stairs, etc.). The aim of ...
  • POWER GENERATION WITH VORTEX INDUCED VIBRATIONS 
    Muhammad shahzaibAsim Hafiz Muhammad Osama Khan Hassan Majeed A khund M Abdullah Hassan Malik, supervised by Dr Adnan Munir (SMME, 2022)
    The focus of the project is to develop a clean green source of energy production by utilising the renewable kinetic energy of a flowing body of water by incorporating a cylindrical structure that oscillates in the flow ...
  • DESIGN AND FABRICATION OF A ROADSIDE VERTICAL AXIS WIND TURBINE 
    Ahmed waleed Anas muzammil Muhammad hamza Sohaib nawaz, supervised by Dr Emad-ud-din (SMME, 2022)
    The report consists of a detailed discussion and tabulation of the final year project subjected to the Design and Fabrication of a roadside Vertical Axis Wind Turbine (VAWT) in the partial fulfillment of the bachelor‟s ...
  • ANALYSIS OF SAFETY OF A CNG CYLINDER UNDER IMPACT 
    Saba Khan, supervised by Dr Aamir Mubashar (SMME, 2022)
    The human mind has been working towards making the life of mankind more productive and easier. From the invention of wheels to bullet trains, man has found his curiosity to be the driving force behind so many inventions. ...
  • DESIGN AND DEVELOPMENT OF OXYGEN CONCENTRATOR 
    Malik Ahnaf Zahid Hafsa Rahmeen Ashhad naeem Ghazi Sanaullah, supervised by Dr Jawad Aslam (SMME, 2022)
    Form Chronic obstructive pulmonary disease, or COPD, as emphysema or chronic bronchitis, to the diseases such as pneumonia typhoid and more importantly the corona virus, or COVID 19, related complexities, patients always ...
  • DESIGN AND OPTIMIZATION OF WRIST ORTHOSIS 
    Ahmed Arslan Asgher Umer Ibtesam Afaq Ahmed Affan Shahid, supervised by Dr Aamir Mubashar (SMME, 2022)
    A Wrist Hand Orthosis functions as a mechanical, wearable medical device to support weak or damaged parts of the forearm, wrist, and hand, while it also serves to correct orthopedic maladjustments with both mobile and ...
  • Design and Development of a Mounted Corn Picker 
    Sajjad Ali Muhammad Ali Mehmood ayaz khan, supervised by Dr Rehan Zahid (SMME, 2022)
    This report aptly presents the work done on the Design and Development of the mounted Corn picker. Corn production is one of Pakistan’s major businesses which is very widespread. Owing to lack of technological advancements, ...
  • AGRICULTURAL UAV DESIGN (AGRI-DRONE) 
    FAHAD NIAZ MUHAMMAD ABDULLAH MUHAMMAD KASHIF USAMA ARIF KHAN NIAZI, Supervised by (SMME, 2021)
    Unmanned air vehicles are a promising technology having a wide range of applications. In this technologically evolving world, numerous new precision farming technologies have emerged to optimize crop productivity and to ...
  • Thermal Management of PV Panels using Passive Cooling Approaches 
    Muhammad Danish Naeem Hubaib Khan Talha Rauf Muhammad Talha, Supervised by Dr Muhammad Sajid, (SMME, 2021)
    Due to rising global warming and increased energy security around the world, there is an ever-increasing need for transition towards more cleaner and renewable energy sources around the world in place of conventional energy ...
  • DESIGN AND ANALYSIS OF AN ELECTRIC ATTACHMENT FOR PROPELLING A WHEELCHAIR 
    Sunia Tanweer Syed Muhammad Faraz Hussain Kazmi, Supervised by Dr Aamir Mubashar (SMME, 2021)
    Over the span of the last couple of years, great strides have been made in the domain of assistive technology for the paraplegic community. Several of these advancements pertain to devices energized through various sources ...
  • Design and Analysis of a Bladeless Drone 
    Saad Ejaz Muhammad Shahzad, Supervised by Dr. Muhammad Jawad Khan (SMME, 2021)
    With the rapid growth of the global drone market, drone safety has become a matter of prime importance. Among drone accidents, propeller-based injuries dominate both in the frequency of occurrence and the severity of the ...
  • DESIGN AND ANALYSIS OF HYBRID HORIZONTAL TURBINE 
    Hammad Khan Muhammad Zun Nooren Bangash Muhammad Saad Raza Hafsa Sajjad, Supervised by Dr. Emad Ud Din (SMME, 2021)
    This thesis is intended to describe the theoretical solution to our final year project, Design and Analysis of a Horizontal Hybrid Turbine. The project was aimed at giving the proof of concept for a hybrid turbine, i.e., ...
  • COMPUTATIONAL MODAL ANALYSIS OF A LOW-PRESSURE TURBINE BLADE USING DIFFERENT MATERIALS 
    Shehzada Anees Khan Ihtesham Arif, Supervised by Dr. Niaz Bahadur Khan (SMME, 2021)
    Gas turbine engines encompass a wide range of applications ranging from electricity production to aircraft propulsion. The air is raised to a high temperature and pressure which then is fed to a turbine where it expands ...
  • PORTABLE PLASMA CNC MACHINE 
    MUHAMMAD AWAIS GOHAR MEHMOOD BAJWA ALI AHMED MUHAMMAD ABDULLAH, Supervised by Dr. Jawad Aslam (SMME, 2021)
    The report covers the aspects of the design and fabrication of a portable plasma CNC machine. CNC machines are generally non-portable and very expensive. We aim to fabricate a very portable yet fairly accurate (accuracy ...
  • Design of a Variable Valve Actuation System For an Automobile Engine 
    Muhammad Shamir Shahid Muhammad Nauman Tariq Muhammad Mubashir Muhammad Shaheer Khan, Supervised by Dr. Sami Ur Rehman (SMME, 2021)
    to the continuous increase in global warming and pollution around the world, there is an increase need of reducing CO2 emissions that harm the environment. Automobiles are one of the major contributors to the damage of ...
  • DESIGN ANALYSIS AND MANUFACTURING OF KNEE ANKLE FOOT ORTHOSIS (KAFO) 
    Jawad Ali Muhammad Abbas, Supervised by Dr. Niaz Bahadur Khan (SMME, 2021)
    Lower limb orthosis are used to control instabilities that are primarily caused by neurological and muscular diseases, such as post-polio syndrome, spinal cord injury etc. by maintaining proper alignment and controlling ...
  • DESIGN, ANALYSIS & MANUFACTURE OF A SAFE LOW COST CHAFF CUTTER 
    Ebad Ur Rehman Muhammad Hammad Maqsood Ibrar Ullah, Supervised by Dr. Sana Waheed (SMME, 2021)
    Rising human injuries owing to unsafe Chaff Cutters among farmers is an increasing concern in Pakistan. Chaff cutters are the leading cause of agricultural injuries (50-65%). Injuries are mostly the upper limb amputations. ...

Search DSpace


Advanced Search

Browse

My Account