BS: Recent submissions

  • DESIGN AND DEVELOPMENT OF BARRIER TRANSFER SYSTEM 
    Muhammad Hashim Khan Muhammad Saad Sarah Zaidi Sjaa Mukhtar, supervised by Dr Aamir Mubashar (SMME, 2022)
    This report briefly describes the prevalent traffic and road conditions in Pakistan due to numerous reasons, including but not exclusive to overpopulation, inexperienced driving, low-quality roads, and lack of law ...
  • EMG TRIGGERED LOWER LIMB REHABILITATION DEVICE FOR STROKE PATIENTS 
    M Mutahar Imran M Saad Qureshi Mahin Mansoor Ahmad Zarrar, supervised by Dr Asim Waris (SMME, 2022)
    Stroke is becoming a common disease in elderly people which often leads to some functional disability, mainly affecting the stride and sometime in severe case it become permanent dysfunction. It affects one out of six ...
  • Autonomous Mobile Robot with ChainDriven Live Roller Top Module 
    Muhammad Ammar M. Moeed Ahmed M Abdullah Younas Khezar Qayyum, supervised by Dr Khawaja Fahad Iqbal (SMME, 2022)
    Robots that can navigate through their environment are termed mobile robots. Mobile robots are being utilized in various fields, such as agriculture, transport, package delivery, disaster recovery, military, surveillance, ...
  • DEVELOPMENT OF DRONE BASED SLAM 
    Jalal Hassan M Hamza Saleem Muhamamd Ahsan Huzaifa Hussain, supervised by Dr Jawad Khan (SMME, 2022)
    This research looks at how to merge two systems, SLAM and UAV. The key difference is that using the UAV attitude controller provides a constant starting value for the SLAM system, allowing the direct SLAM approach to ...
  • WANKEL ROTARY ENGINE 
    Bilal Aziz Nibras Salman Hareem Fatima Laiba Rehman, supervised by Dr Sami ur Rehman Shah (SMME, 2022)
    This paper emphasizes how Wankel Rotary Engine can potentially compete with the conventional Piston engine following its prime advantages over the competitor. Few of which include, the higher power output, greater torque ...
  • DESIGN AND DEVELOPMENT OF A BIPED ROBOT 
    Hassan Khalid Abdullah Zafar Ahmed Abdullah Shahid, supervised by Dr Yasar Ayaz (SMME, 2022)
    The RISE lab at SMME NUST has been continuously working on the research and development of robotics since its inception in the early 2000s. One of the major projects that has been worked on in the RISE lab has been the ...
  • Design of High-Speed Centrifugal Compressor for High-Speed Turbomachinery 
    M Adil Mumtaz M Usman Shafique M Usman khan M Mateen Ashraf, supervised by Mr. Abdul Naeem Khan (SMME, 2022)
    One of the most valuable type of compressors is centrifugal compressor. This project aims at the design of centrifugal compressor for a high-speed turbomachinery to meet certain objectives and requirements. Apart from the ...
  • DESIGN AND DEVELOPMENT OF A SELF-MODULATING LOW-COST NEONATAL VENTILATOR 
    Abdul Mohaiman Hassan Rana M Saad Ali Umar Zeeshan Ali Raza, supervised by Dr Najam Ul Qadir (SMME, 2022)
    The second decade of the 21st Century ended with what historians claim as the deadliest pandemic of the last 100 years. The world of 2020 witnessed the collapse of human society in every way possible. Be it health, hygiene, ...
  • Structural Analysis of Satellite Launch Vehicle for Aerospace Applications 
    M Faizan shabbir Ahmed naveed M Hamza daud Muhammad Waqas, supervised by Dr Niaz Bahadur Khan (SMME, 2022)
    Pakistan does not have its own satellite launch vehicle yet, so we are helping our industry to develop one. Our project “Structural Analysis of Satellite Launch Vehicle for Aerospace Applications” includes the aerodynamic ...
  • Vibrations Damping Glove for Parkinson’s disease 
    Raffay Mohammad Waseem Ali Asad Talha Rehman, supervised by Dr Jawad Aslam (SMME, 2022)
    Hand tremors have become increasingly widespread over the years. Although there are many causes of these tremors like Parkinson’s, anxiety etc. Essential Tremors are the most common cause. This neurological disorder causes ...
  • DESIGN AND DEVELOPMENT OF SWARM NETWORK FOR MONITORING AND SURVEILLANCE 
    Eesha Naeem Abdul Moiz Javed Arfa Eeman, supervised by Dr Muhammad Jawad Khan (SMME, 2022)
    Using UAVS, especially drones for monitoring and surveillance is much more efficient and reduces the response time by almost 44%. This project aims to design and develop a workable swarm system which can serve the purpose ...
  • AUTOMATED QUALITY CONTROL OF BISCUITS USING COMPUTER VISION 
    M Taimoor Shahzad M Hamza Qaisar Shaheer ahmad khan Kalsoom nazish, supervised by Dr Muhammad Usman Bhutta (SMME, 2022)
    This thesis is intended to describe the design and fabrication of a solution for Automated Quality Control of the Biscuits through Computer Vision. The project is aimed at providing an optimized solution for the quality ...
  • Design of Variable Rate Fertilizer Spreader for UAV 
    Muhammad hammad khilji Muhammad haziq hussain Muhammad uzair, supervised by Dr Zaib Ali (SMME, 2022)
    Precision Agriculture is a term which is widely used in the current 21st century, it means to implement the modern technologies, especially modern computing, artificial intelligence, satellite communication and drone ...
  • Design and Development of Chassis for Prototype Electric Vehicle with Steering and Drive System 
    Muhammad Uzair Asif Bashir ahmad M Hammad Hussain Ali arsal khan, supervised by Dr Mian Ali Ashfaq (SMME, 2022)
    All across the globe, general shift from Fossil Fueled Vehicles to Electric Vehicle is becoming more prominent by each passing day. As fossil fuel reserves deplete and fuel prices hike, advent of Electric Vehicles in ...
  • Design and Fabrication of Food Dryer 
    Muhammad Ali Ammar ahmed Khizar Hayyat, supervised by Dr Zaib Ali (SMME, 2022)
    Pakistan has two major national strengths; the high rate of agricultural production and the solar irradiance that graces most of the country year-round. This project attempts to combine the two with a complementary technology ...
  • DESIGN AND MANUFACTURING OF HYBRID VERTICAL TAKEOFF AND LANDING (VTOL) UAV 
    Sameer bin khalid Aqib habib Usman shahid Muhammad salman azam, supervised by Dr Zaib Ali (SMME, 2022)
    The usage of UAVs has risen tremendously in recent years because of improved avionics and propulsion technology; nonetheless, there is a lot of demand to improve the range, endurance, speed, and ergonomics of UAVs. Neither ...
  • DESIGN, OPTIMIZATION AND FABRICATION OF VORTEX BLADELESS WIND TURBINE 
    Muhamamd Anas Muhammad Shehraz Rafiq, supervised by Dr Sadaqat Ali (SMME, 2022)
    Today, energy consumption is much more than energy production. Gone are the days when energy can be produced by carbon emission methods. Researchers have been studying energy harvesting from wind turbines for more than a ...
  • REFRIGERATION SYSTEM BASED ON VAPOR-ABSORPTION CYCLE WITH SOLAR POWERED GENERATOR 
    Muhammad Zia Ullah M Zain ul Abedin Irtaza asghar Umer zahid, supervised by Eng Abdul Naeem Khan (SMME, 2022)
    Energy is the life artery of the modern world and increasing CO2 emission represent a beginning of life‟s end, so the unique way for life continuity is more research in clean and renewable energy such as solar energy. One ...
  • Design and Fabrication of a maneuverable UGV targeting the Healthcare Industry 
    Muneeb afzaal Saim Omer Sami ullah Uzair Sohail, supervised by Dr Javaid Iqbal (SMME, 2022)
    The following report discusses the design of an Unmanned Ground Vehicle (UGV) which will enable it to cover rough and diverse tracks, specifically focused on urban terrains (inside of a building, stairs, etc.). The aim of ...
  • POWER GENERATION WITH VORTEX INDUCED VIBRATIONS 
    Muhammad shahzaibAsim Hafiz Muhammad Osama Khan Hassan Majeed A khund M Abdullah Hassan Malik, supervised by Dr Adnan Munir (SMME, 2022)
    The focus of the project is to develop a clean green source of energy production by utilising the renewable kinetic energy of a flowing body of water by incorporating a cylindrical structure that oscillates in the flow ...

Search DSpace


Advanced Search

Browse

My Account