MS: Recent submissions

  • Design and development of 3D printing facility using Metal Inert Gas (MIG) Welding 
    AMJAD ALI, supervised by Dr. SADAQAT ALI (smme, 2022)
    The in-progress research effort is to optimize the gas metal arc welding parameters on the impact strength, flexural strength, and hardness of the fused generated part of SS316L using the Taguchi-based grey relational ...
  • Effects of various parameters on Net-Zero Energy Buildings design 
    MUHAMMAD WASIQ RIAZ, supervised by Dr. ZAIB ALI (smme, 2022)
    Due to increase in climate change and urbanization, Net Zero Energy Buildings are one of the most effective solutions in energy and building sectors. Techniques to decrease the cooling and heating loads have been applied ...
  • Development and Testing of the Hybrid Indirect Direct Evaporative Cooling System with its Application in Pakistan 
    Ibrahim Khan, Supervised by Dr Waqas Khalid (SMME, 2022)
    The Evaporated Cooling technology has revived...
  • Numerical Analysis on 3D Microfluidic Paper Based Analytical Device 
    Zeeshan Abid, supervised by Dr. Zaib Ali (smme, 2022)
    Paper-based microfluidics are microfluidic devices that consist of a series of hydrophilic cellulose or nitrocellulose fibers that transport fluid from an inlet through the porous medium to a desired outlet or region of ...
  • Experimental Investigation of Energy Harvesting in the Wake of Circular Cylinder using Cantilever Pivoted Piezoelectric (Eel) 
    RIZWAN MAHMOOD, supervised by DR. ADNAN MUNIR (2022)
    Set of experiments are designed and executed in a water tunnel to study the impacts of pivoted mounting mechanism on piezoelectric flag and to observe improvement in the parameters associated with energy harvesting. For ...
  • Model ng and Energy Simulation of and Educational Building A case study in Pakistan 
    MUHAMMAD ABDULLAH, supervised by Dr. WAQAS KHALID (smme, 2022)
    Climate change is increasing the average temperature of world due to emission of greenhouse gases (GHGs) in large amount. This has increased the annual energy consumption of buildings. These energy demands are fulfilled ...
  • Numerical Analysis of Adhesively Bonded Single Lap Joint 
    Muhammad Hassan, supervised by Dr Aamir Mubashar (smme, 2022)
    This research shows the effect of aluminum oxide Al2O3 nanoparticles included in Epocast 50-A1/946 epoxy adhesive at different temperatures in quasi-static tensile loading. The single lap adhesive joint with two different ...
  • Hydraulic Actuator Test Rig 
    Abdul Khaliq, supervised by Prof. Dr. Riaz Ahmed Mufti (smme, 2022)
    Hydraulic actuator is the main component in hydraulic power steering system of tractors and other hydraulic machinery. These actuators must be inspected to an acceptable level through an efficient inspection machine in ...
  • Experimental Study of Lungs Airways 
    Hassan Sardar, supervised by Dr. Emad Ud Din (smme, 2022)
    Breathing is phenomenon essential for every mammal on Earth. Key role of respiratory system is transmission of vital gases between air and blood. Conventionally some macroscale techniques for flow visualization in ...
  • Evaluation of different metal cutting models during machining of Inconel-718 
    Muhammad Ghazi Hamza, supervised by Dr. Syed Hussain Imran Jaffery (smme, 2022)
    Inconel-718 is a nickel-based aerospace alloy that has large domain of applications in the aerospace industry and also in ground-based turbines. Machining of Inconel-718 is a very difficult process as it is able to retain ...
  • An Investigation of Strength of Adhesives & Single Lap Adhesive Joints at Various Temperatures and Filler Concentrations 
    Kainat Nawaz Chaudary, supervised by Dr Aamir Mubashar (2022)
    The research presents the behavior of the mechanical properties of epoxy adhesives & adhesively bonded single lap joints made using same epoxy adhesives (LY-556 /AD 22962). Research has shown that various factors impact ...
  • LASER HYBRID MICRO MILLING OF Ti6Al4V (Ti-grade 5) 
    Sabeeh ul Hasan, supervised by Dr Sadaqat Ali (SMME, 2022)
    Ti6A14V is deemed suitable for high thermal applications, and it is considered a ''Workhouse'' material in the aerospace industry. Salient features of Ti6Al4V include high strength to density ratio and outstanding material ...
  • Synthesis and Tribological Analysis of Ionic Liquid-Based BioLubricants 
    Tehreem Naveed, supervised by Dr Rehan Zahid (SMME, 2022)
    Purpose. Lubrication is inevitable for all interacting surfaces in IC engines to avoid component failure and reduce frictional losses specifically operating under boundary lubrication regime. Environmental concerns, ...
  • Detection of COVID’19 through low resolution CT scan images using Deep Learning 
    Hajra Arif, supervised by Dr Syed Omer Gillani (2022)
    Coronavirus emerged as a deadly disease in 2019 killing almost 6.25 million people, with its variants still being discovered. For timely medical treatment it is necessary to accurately and rapidly diagnose the disease. ...
  • Audio Visual Authentication 
    Talha Yousuf, supervised by Dr Hasan Sajid (SMME, 2022)
    In bio-related applications privacy is an essential element. While most of the techniques in Deep Learning rely on single modality, spoofing attacks can be minimized by em ploying multi-modal approaches. Purpose of this ...
  • Audio-Visual Person Recognition 
    Ahmad Ali, supervised by Dr Hasan Sajid (SMME, 2022)
    Person authentication is a primary element to consider wherever privacy is necessary. Deep learning based authentication algorithms have a number of applications in the said field. Adding multiple modalities makes the ...
  • Random Filter-Switching-based Defense Against Decision-based Adversarial Attacks on Machine Learning 
    Rashad Khalid, supervised by Dr Muhammad Jawad Khan (SMME, 2022)
    In the AI and machine learning research field, adversarial machine learning(AML), a technique that tries to deceive models using erroneous data, is becoming a major concern. By exploiting the inherent vulnerability of ML ...
  • Enhanced Drone Control Using Reinforcement Learning 
    Hassan Moin, supervised by Dr Muhammad Jawad Khan (SMME, 2022)
    Quadcopters have already proven their effectiveness in both civilian and military applications. Their control, however, is a difficult task due to their under-actuated, highly nonlinear, and coupled dynamics. Most quadcopter ...
  • Urdu Text Recognition in TV Channel Streams 
    Hira Afzal, supervised by Dr Hasan Sajid (SMME, 2022)
    Text recognition from images has received a lot of attention of the researchers for over three decades. It is one of the most worked upon problem in the domain of pattern classification. The optical character recognitions ...
  • EFFECT OF WIND DEFLECTOR ON LEADING FIN OF SAVONIUS WIND TURBINE: EXPERIMENTAL ANALYSIS 
    Usman Khan, supervised by Dr Syed Husain Imran (SMME, 2022)
    In the emerging field of energy conversion technology, one of the equipment that have played a major role in the past is steam engines. These technologies, including the steam engine, are utilized to transform fossil ...

Search DSpace


Advanced Search

Browse

My Account