DSpace Home
→
E-Theses
→
SMME
→
Biomedical Engineering and Sciences
→
MS
→
Browsing MS by Issue Date

Browsing MS by Issue Date

Now showing items 1-20 of 367

DESIGN FOR MANUFACTURE OF ENVIORNMENTAL TESTING CHAMBER FOR PHOTOVOLTAIC CELL

ALI HUSSNAIN, Supervised by Dr Hussain Imran (SMME, 2012)

The research work will focus on the design of Photovoltaic Cell Testing Chamber. The Testing Chamber should be insulated from outside environment. The three parameters should be generated in inside testing chamber.i.e. ...
MODELING CAVITATION EFFECTS ON LOW SPEED INDUSTRIAL JOURNAL BEARING LUBRICATION

Azhar Zeb, Supervised by Prof. Dr. Riaz Ahmad Mufti (SMME, 2013)

An effective lubrication of journal bearings is jeopardized due to the formation and activity of air cavities in the lubricant. Cavitation affects the buildup of hydrodynamic pressures adversely & lowers the hydrodynamic ...
Design and Development of Auxetic Coronary Stent for the Treatment of Coronary Heart Diseases

FAISAL AMIN, Supervised By Dr Murtaza Najabat Ali; FAISAL AMIN (SMME-NUST, 2014)

Cardiovascular heart disease in the present era is one of the leading health problems and needs considerable healthcare resources to avoid these issues. This thesis is focused on new coronary stent development based on ...
“Design and Development of a Novel Auxetic Bone Plate for Long Bone Fractures”

SEEMAB MAHMOOD, Supervised By Dr Murtaza Najabat Ali (SMME-NUST, 2014)

Injuries cover about 11% of World’s Disease Burden depicting fractures to be the leading cause of trauma. Fracture occurs due to force impact or osteoporosis. Fracture healing is nothing but a complicated process. Fracture ...
Automated Segmentation and Classification of Lesion on Breast Ultrasound

ZAHRA FAZAL, Supervised By Dr Syed Omer Gilani (SMME-NUST, 2014)

In this research we have developed and evaluated a computer aided diagnosis (CAD) model that is based on the automated segmentation of breast lesion on ultrasound images. Active contour model has been used for segmentation ...
Design and Analysis Study for a Cost Effective and/or Better Quality Hearing Aid Device

Muhammad Zia Ur Rehman, Supervised By Syed Irtiza Ali Shah (SMME-NUST, 2014)

World Health Organization report (2012) shows that 360 million people are suffering from disabling hearing loss worldwide. Hearing loss affects the developing and learning processes in children, while in adults, it affects ...
TIO2 NANOPARTICLES-FUNCTIONALIZED POLYMERIC MEMBRANES FOR WATER TREATMENT

MARYAM HINA, Supervised By Dr Nasir M. Ahmad (SMME-NUST, 2014)

One of the major challenges to public health in world is water pollution. In many developing countries the access to safe drinking water falls below acceptable levels. Bacterial contamination is one of the main causes of ...
SILVER NANOPARTICLES FUNCTIONALIZED POLYMERIC MEMBRANE FOR WATER DISINFECTION

SIDRA RANA, Supervised By Dr Nasir M. Ahmad (SMME-NUST, 2014)

Water is the most basic need for the survival of life on this planet. Out of 100% water present on earth merely 1% is available as fresh potable water. This tiny percentage is also facing decline due to increasing population ...
Magnetic Nanoparticles and Biopolymer Magnetic Colloids for Ultrasensitive Molecular Imaging and Hyperthermia

Hira Fatima, Supervised By Dr Nosheen Fatima (SMME-NUST, 2014)

Multifunctional nanomaterials are propitious candidates for molecular imaging and therapeutic applications. Here we reported the preparation of magnetic nanoferrites and biopolymer core-shell magnetic colloids (BCMC) with ...
FORMULATION AND IN VITRO EVALUATION OF AMPHOTERICIN B POLYMERIC EMULSION

ZO-AIN ISHAQ, Supervised by Dr NASIR M. AHMED (SMME, 2014)

Amphotericin B (AmB), is an effective antifungal and anti leishmenial agent associated with low oral bioavailability which is available in liposomal and simple preparation intended for parenteral administration. Simple AmB ...
LASER WELDING OF DISSIMILAR MATERIALS (STAINLESS STEEL 316L TO TITANIUM TI-6AL-4V)

USAMA KHAN, Supervised by Dr Mushtaq Khan (SMME, 2014)

Laser butt welding of stainless steel 316L and titanium alloy Ti-6Al-4V was performed. First, beads on plate welds on 1mm thick steel and titanium plates were performed using 650W CO2 laser at speed ranging from 100 mm/min ...
A Benchmark of Computational Models of Saliency to Predict Human Fixation in Videos

Muhammad Shoaib Azam, Supervised by Dr. Syed Omer Gilani (SMME, 2014)

In many applications of computer graphics and design, robotics and computer vision, there is always a need to predict where human looks in the scene. However this is still a challenging task that how human visual system ...
Experimental Investigation of Optimized Parameters for Open Hole Compression Strength of Carbon Epoxy Composite & Determination of Localized Strains Using Digital Image Correlation Technique

Tayyab, Muhammad (SMME, 2014)

Composites materials have wide applications in different industries because of it has very different properties from the metals and polymers. Drilling is very common in composites to assemble different composite parts ...
Intramedullary Balloon Catheter Stent For Tubular Fractures

Zainab Munib Supervised By Dr.Murtaza Najabat Ali (SMME-NUST, 2014)

Trauma remains one of the leading causes of mortality, with fractures accounting for the majority of trauma; therefore novel therapies are desperately needed to optimize patient outcomes. The fixation device, intramedullary ...
Design and Fabrication of Functional Scaffolds for Bone Regeneration Applications

Rabeil Sakina, Supervised By Dr Murtaza Najabat Ali (SMME-NUST, 2015)

Bone tissue regeneration across critical sized segmental bone defects requires external intervention in order to enable tissue growth across the gap which would otherwise be non-regenerating. Such intervention commonly ...
Individual Differences in Producing Movement Related Potentials & Online Multiclass Brain-Computer Interface for Detection and Classification of Movement-Related Cortical Potentials Associated with Task Force and Speed

MUHAMMAD SAMRAN NAVID, Supervised By Dr Muhammad Nabeel Anwar (SMME-NUST, 2015)

Background: In recent years, the interest in the detection of intentions of voluntary movements for triggering external devices in closed-loop brain-computer interfaces (BCIs) for rehabilitation procedures has increased. ...
LUNG NODULE DETECTION IN CT SCAN IMAGES

MUZZAMIL JAVAID, Supervised By Syed Irtiza Ali Shah (SMME-NUST, 2015)

Timely detection of pulmonary nodule plays significant role in the diagnosis of lung cancer at early stage and thus improves the chances of survival of a patient. In this paper a computer aided nodule detection method is ...
“Design Fabrication and Testing of a Novel Multifunctional Wound Healing Device

Mariam Mir, Supervised By Dr Umar Ansari (SMME-NUST, 2015)

Auxetic materials tend to exhibit stretching in the direction of the applied load as well as in the perpendicular direction. This may be an inherent property of the material, or it might be a particular structural ...
A NEW CONCEPT OF DEDICATED DEPLOYMENT DEVICE FOR STENTS HAVING NEGATIVE POISSON’S RATIO

FAIZA BUKHARI, Supervised By Dr Umar Ansari (SMME-NUST, 2015)

Auxetic stents having negative Poisson’s ratio tend to expand radially as well as longitudinally when unidirectional force is applied. Recently, studies have come up with new designs of auxetic vascular and non-vascular ...
Preparation of Antibacterial Cotton Fabric using Chitosan-Silver Nanoparticles

Dooa Arif, Supervised By Dr Muhammad Bilal Khan Niazi (SMME-NUST, 2015)

The aim of this study was to prepare antimicrobial cotton fabric using chitosan-silver nanoparticles (CS-AgNPs). CS-AgNPs were used as finishing agent for textile made from 100 % pure cotton. AgNPs used in composite were ...

Now showing items 1-20 of 367

Search DSpace

Advanced Search

Browse

All of DSpace
This Collection
- By Issue Date
- Authors
- Titles
- Subjects

Browsing MS by Issue Date

Browsing MS by Issue Date

Search DSpace

Browse

All of DSpace

This Collection

My Account