BS: Recent submissions

  • DESIGN OF 150 TONNES/DAY PRODUCTION OF GREEN AMMONIA PLANT 
    Momina Mushtaq, Maryam Abbasi, Muhammad Araheem Abaid, Muhammad Uzair (School of Chemical and Material Engineering (SCME), NUST, 2024)
    Ammonia, with annual production of about 176 million tonnes, is a key component of many fertilizers. The conventional Haber-Bosch process for ammonia production relies on nonrenewable resources (natural gas) which are ...
  • DESIGN OF HYDROGEN RECOVERY UNIT FOR THE ENHANCEMENT OF AMMONIA PLANT PRODUCTION 
    Mujahid Rehman, Hassaan Bin Farooq, Farrukh Noor, Syed Faraz (School of Chemical and Material Engineering (SCME), NUST, 2024)
    Plant-II of FFC Goth Machi is currently utilizing cryogenic separation for recovering hydrogen from the purge stream. They aim to install another hydrogen recovery unit for their older plant, Plant I in Mirpur Mathelo. ...
  • DESIGN AND ECONOMIC FEASIBILITY OF NITROGEN PRODUCTION FROM AIR TECHNOLOGY [COMBUSTION-BASED] 
    Sadia Faizan, Ayesha Noor, Junaid Rana, Umair Butt (School of Chemical and Material Engineering (SCME), NUST, 2024)
    To design and find the economic feasibility of the novel combustion-based nitrogen production process. As the major challenge of any process to be feasible is its results and economy. Nitrogen production plant design and ...
  • PRODUCTION OF CRUDE TEREPHTHALIC ACID (CTA) FROM PARAXYLENE OXIDATION 
    Manahil Tariq, Muhammad Maaz, Jannat, Ali Haider (School of Chemical and Material Engineering (SCME), NUST, 2023)
    Terephthalic acid is a central component in polyester fibres , films, PET bottles, and other polyester products. It is a raw material for a variety of household products and clothing, and since much of the plastic and ...
  • PROCESS DESIGN OF NITROPHOS FERTILIZER BY UTILIZING NATIONAL PHOSPHATE RESERVES 
    Adan Habib, Hashir Anjum, Amna Amir, Muhammad Tariq Jawed (School of Chemical and Material Engineering (SCME), NUST, 2023-06)
    Nitro-phosphate (NP) is a complex acidic fertilizer which contains two macronutrients of plants, nitrogen (N) and phosphorous (P). NP is majorly used for rooting, blooming and fruit production of plants. Demand of ...
  • DESIGN OF GROUNDWATER RECHARGE FACILITY FOR TREATED EFFLUENT OF ATTOCK REFINERY LIMITED 
    Muhammad Fahad Fareed, Ammar Hassan, Muhammad Saleh, Muhammad Umer Toor (School of Chemical and Material Engineering (SCME), NUST, 2023-06)
    Effluent treatment plants serve as vital necessities for both industrial operations and the preservation of our environment. Their significance lies in their ability to facilitate the safe discharge or reuse of wastewater. ...
  • DESIGN OF COOLING WATER SYSTEM FOR ATTOCK REFINERY LIMITED 
    Aimen Rabbani, Asnia Zahra, Mohammad Jarrar Haider (School of Chemical and Material Engineering (SCME), NUST, 2021-06)
    Cooling tower is crucial piece of equipment for any refinery as it is used to reject waste heat. It operates on the principle of heat and mass transfer and cools water on the mechanism of evaporation. Cooling water system ...
  • DESIGN OF PRODUCTION PROCESS OF PARAXYLENE NAPHTHA 
    Memon, Muhammad Kamil; Zahid, Danyal; Saqib, Abdul Rafae; Sibghat Ullah, Muhammad (National University of Sciences and Technology (NUST) School of Chemical & Materials Science(SCME), 2023-06)
    The utilization of naphtha obtained from plastic waste and refinery holds immense potential for closing the loop on plastics and controlling the entire value chain in Pakistan. This research aims to harness indigenous raw ...
  • DESIGN AND DEVELOPMENT OF A PROCESS FOR DESULFURIZATION OF COAL 
    Ahmad Raza, Umer Imtiaz, Muntazir Mehdi, Muhammad Saqib Farooq (School of Chemical and Material Engineering (SCME), NUST, 2023-06)
    Having so many large reserves of coal, Pakistan is facing an energy crisis because coal is not being utilized. The primary purpose is that in coal incineration in electricity plant life, high sulfur content material of ...
  • DEVELOPMENT OF A PROCESS FOR THE CONVERSIONOFARL'SWASTE STREAMS TO ENERGY 
    Ayesha Noor, Azka Javed, Zarfishan Tahir, Syed Saffi Haider Shah (School of Chemical and Material Engineering (SCME), NUST, 2023-06)
    Oil sludge is a complex mixture of water, solids, heavy hydrocarbons, polycyclic aromatic hydrocarbons, and heavy metals that remains in storage tanks and facilities. Its composition varies based on the origin of the ...
  • DYNAMIC MODE CONTROLLER DESIGN OF AMMONIA PRODUCTION UNIT 
    Muhammad Hamza Afzal, Muhammad Hamza Butt, Muhammad Nofal Javed, Hassan Conteh (SCME NUST, 2023-06)
    This thesis designs dynamic mode controllers for ammonia unit to increase production, reduce troubleshooting time and automate the plant. The study begins by reviewing literature and selecting the best approach for dynamic ...
  • DESIGN15TONS/DAY PRODUCTION FACILITYOF POLYOLS FROM WASTE PET BOTTLES 
    Mohammad Haris Ali Siddiqui, Abdul Rehman Farooqui, Usama Ahmed Khan, Muhammad Adnan Iqbal (SCME NUST, 2023-06)
    As the problem of plastic waste management increases in Pakistan, the need for better and more efficient chemical recycling methods also arises. Our team worked on the utilization of waste PET (Polyethylene Terephthalate) ...
  • GREENHOUSE GAS INVENTORY AND MITIGATION PLAN 
    Ahmed, Mairah; Baig, Neeha; Hafeez, Amna; Awan, Amman Ilyas (National University of Sciences and Technology (NUST), 2023-06)
    The overreliance on fossil energy brings serious environmental problems in addition to the scarcity of energy. At the same time, the emissions of CO2 have only been rising, as suggested by our inventory analysis of the ...
  • ZERO LIQUID DISCHARGE (ZLD) PROJECT FOR THE WASTEWATER STREAMS OF ATTOCK REFINERY LIMITED (ARL), RAWALPINDI 
    Sana Ullah, Sultan Abdullah, Muhammad Bilal Jutt, Syed Hassan Irtaza Naqvi (SCME NUST, 2023-06)
    Zero Liquid Discharge (ZLD) is an innovative approach that ensures no liquid waste is discharged from the plant. This sustainable approach reduces water consumption, conserves precious resources, and helps industries and ...
  • UPGRADED TECHNOLOGIES FOR BOILER FEED WATER 
    Maham Bashir, Muhammad Saad, Amaan Malik, Saad Ur Rehman (SCME NUST, 2023-06)
    Boiler Feed Water needs to meet specific standards according to the ASME Standards for Boiler Feed Water, to produce steam that is utilized at different locations in the Attock Oil Refinery Limited (ARL). The project aims ...
  • PROCESS DESIGN OF CTA PRODUCTION WITH RE-DESIGNING OF ROTARY STEAM TUBE DRYER 
    Aqsa Amir, Muhammad Jahanzeb, Muhammad Hasan, Mian Ahsan Bari (SCME NUST, 2023-06)
    The AMOCO process is widely used to produce Terephthalic Acid from the oxidation of paraxylene. This process produces Crude Terephthalic Acid (CTA) and further purify it to Pure Terephthalic Acid (PTA) which is the ...
  • PRODUCTION OF ETHANOL USING CELLULOSIC MATERIALS 
    Syed Muhammad Haisam, Zeeshan Saifullah, Ansa Saeed, Taimoor Khurshid (SCME NUST, 2023-06)
    Due to rising demand worldwide, it is predicted that within ten years, the amount of energy consumed will increase by almost 50%. The primary source of energy, petroleum oil, is rapidly running out both in Pakistan and ...
  • PROCESS DESIGN FOR A 120 MW (GROSS) CO-GENERATION THERMAL POWER PLANT BASED ON BAGASSE AND COAL FUEL 
    Khalid Habib, Muhammad Ali Hussnain, Muhammad Salman, Usama Waqas (SCME NUST, 2023-06)
    This project aims to design a co-generation thermal power plant with a gross capacity of 120MW, which will be fueled by a combination of bagasse and coal. Bagasse, a byproduct of sugar production, will be used as the primary ...
  • UPGRADED TECHNOLOGIES FOR BOILER FEED WATER 
    Maham Bashir, Muhammad Saad, Amaan Malik, Saad Ur Rehman (SCME NUST, 2023-06)
    Boiler Feed Water needs to meet specific standards according to the ASME Standards for Boiler Feed Water, to produce steam that is utilized at different locations in the Attock Oil Refinery Limited (ARL). The project aims ...
  • DESIGN OF STABILIZER AT DISTILLATION UNIT FOR PRODUCTION OF LPG 
    Muhammad Sameer, Muhammad Osama Shahid, Umair Majeed, Awais Riaz (SCME NUST, 2023-06)
    Modern day crude oil refining at a massive scale is the backbone of the global economy. This process provides fuel for transportation, domestic use and industrial heating uses and provides feedstock for several industries ...

Search DSpace


Advanced Search

Browse

My Account