Browsing BS by Title

Sort by: Order: Results:

  • 2D nanomaterials for Energy Storage 
    Sufyan, Qaiseer Abbas, Khalid Mansoor (SCME NUST, 2018)
    Our aim is to develop ultrathin 2D-nanomaterials which can be used for energy storage and photo-catalysis. The most popular candidate for this purpose is graphene Nano-sheets, which are obtained from graphite by chemical ...
  • ACTIVATED CARBON ELECTRODES FROM SUSTAINABLE RESOURCES FOR ECONOMICAL SODIUM SULFUR BATTERIES 
    Yaqub, Hooria; Hadi, Rija; Sheikh, Irha (SCME, NUST, H-12 Sector Islamabad, 2022-06)
    The aim of this study is to attain sustainability and meet the increasing energy demands of the society. Sources of required materials for these batteries are cheaply and abundantly available in Pakistan. This project has ...
  • ANTI FOULING AND WATER FLUX pH REGULATED SWITCHABLE POLYMERIC MEMBRANES 
    Irfan, Shumail; Ali, Mudassir; Mushtaq, Ali (SCME, NUST, Islamabad, 2020)
    In Pakistan, water quality is deteriorating day by day and there is a need for efficient membrane filtration system but due to excessive fouling the life of membrane is highly reduced and to replace a membrane is very ...
  • Comparison of Corrosion properties of Laser & TIG welded Ti-5Al-2.5Sn Alloy 
    Zafar, Muhammad Hamza; Riaz, Umar; Ellahi, Farooq (SCME,NUST, 2017)
    The electrochemical corrosion behavior of Laser and TIG welded Ti-5Al-2.5Sn alloy was studied in 3.5% NaCl solution using potentiodynamic polarization. Comparisons between corrosion resistance of laser and TIG welded samples ...
  • Container-less Solidification of Advance Engineering and High Entropy Alloys 
    Sadeeda; Jafri, Syed Ali Raza; Asif, Varda (SCME-NUST, 2018)
    Container-less solidification helps achieving large values of undercooling by totally avoiding heterogeneous nucleation at the container walls. Undercooling is nearly always required to drive the solidification front during ...
  • Deposition of Vertically Aligned High Aspect Ratio Zinc Oxide Nanorods for UV and Gas Sensing Applications 
    Khan, M. Zafar; Ali, Dawar; Asif, Jawad (SCME,NUST, 2017)
    The aim of this thesis is to optimize and evaluate the commonly used synthesis routes in order to achieve the desired ZnO nanorod morphology, and to investigate the variation in gas detection properties under the effect ...
  • DERIVING GRAPHENE NANOSHEETS FROM BIOMASS FOR HIGH POWER SUPERCAPACITORS 
    Saud, Shah; Ahmed, Uzair; Ali, Niaz (National University of Sciences and Technology (NUST), 2023-06)
    Due to its environmental friendliness, quantity, and porous makeup, carbon derived from biomass has garnered much interest as an active component for supercapacitor electrodes. Our project employs self-template chemical ...
  • DESIGN AND DEVELOPMENT OF NANOMATERIALS BASED GLUCOSE SENSOR 
    MUHAMMAD MOHIB, MINAHIL SAIF,ZAIN ABDULLAH (SCME,NUST, 2024)
    Diabetes is widespread in Pakistan and the patients must go through the pain of repeated pricking and thereby are prone to infection. The sensor developed in this study can detect glucose from saliva and save people ...
  • DESIGN AND DEVELOPMENT OF A SOPHISTICATED BIOSENSING PLATFORM FOR BACTERIAL SENSING VIA AMPLIFIED EXTRACELLULAR ELECTRON TRANSFER PROFICIENCY 
    Ahsan Nasir, Muhammad; Akhlaq, Manahil; Sherbaz Khan, Sardar (National University of Sciences and Technology (NUST) School of Chemical and Materials Engineering (SCME), 2023-06)
    This study focuses on the development of a biosensing system suitable for bacterial detection. Bacterial diseases are a major concern worldwide and therefore constant research is going on to develop methods for rapid ...
  • Design and Development of Microwave Plasma Torch 
    Arif, Muhammad Salman; Haider, Zeeshan; Sajjad, Sajawal (SCME,NUST, 2017)
    A 800W, 2.45GHz argon gas microwave Plasma torch (MPT) has been designed and fabricated, working at atmospheric Pressure. The Plasma is sustained in a 25-mm internal diameter fused Quartz tube, which penetrates perpendicularly ...
  • DESIGN AND DEVELOPMENT OF POROUS TiMoZr ALLOY 
    Badar Abbasi, Rabail; Mushtaq, Bilawal; Faiz, Muhammad Talha (SCME, NUST, Islamabad, 2020)
    Titanium and its alloys have been widely used in the biomedical industry due to their attractive set of mechanical properties and biocompatibility. Beta-Ti alloys are more desirable due to their inherent lower young’s ...
  • DESIGN AND DEVELOPMENT OF THERMAL AND CHEMICAL PARAMETERS FOR RECYCLING AND RESTORATION OF GLASS FIBERS FROM COMPOSITE WASTE 
    ASHFAQ, ASAD; HAQQI, ZEERAK UL HAQ; IFTIKHAR, ZOHAIB (National University of Sciences and Technology (NUST), 2023-06)
    Previous studies show that Fiber Reinforced Polymers are dumped in landfills after usage or are burned or decomposed by combustion methods. These processes generate environmental waste and landfill problems. The disposal ...
  • DESIGN AND FABRICATION OF FIBERGLASS BASED ASPHALT ROOF SHINGLES FOR CONSTRUCTION INDUSTRY 
    Mahmood, Mahrukh; Tabarik, Mariam (SCME,NUST, 2017)
    Asphlat roof shingle is a roof covering, widely used for waterproofing. The composite is made up of fiberglass which is implied as the base and a coating of mixture of asphalt and limestone over the base. Ceramic granules ...
  • DESIGN AND MANUFACTURING OF THE PROTOTYPE FOR METAL-AIR BATTERY TESTING 
    Adil, Muhammad; Tariq Khan, Tooba; Haseem Ayub, Muhammad (National University of Sciences and Technology (NUST) School of Chemical and Materials Engineering (SCME), 2023-06)
    Metal air batteries have significantly grown over the years due to their superior energy density followed by their cost-effectiveness and eco-friendliness. To develop this technology further, it is necessary to investigate ...
  • DESIGNING IMPRESSED CURRENT CATHODIC PROTECTION (ICCP) SYSTEM FOR CARBON STEEL PIPELINE BURIED IN SOIL 
    Karim, Muhammad Arqam; Asim, Muhammad; Owais, Muhammad (National University of Sciences and Technology (NUST), 2023-06)
    Our project was focused on designing a pilot scale ICCP model to achieve a minimum potential value of -850mV Cu/CuSO4 as per the National Association of Corrosion Engineers (NACE) acceptance criteria “SP0169” to ensure ...
  • Development and Characterisation of Nanobainite 
    Malik, Ali Muhammad; Mehmood, Ahsan (SCME,NUST, 2016)
    The purpose of the present study is to develop and characterise the novel nanostructured bainite in recently proposed low manganese high chromium silicon steel. An attempt is made to test thoroughly the capability of ...
  • DEVELOPMENT AND CHARACTERIZATION OF CERAMIC FOAM TILE FOR ADVANCED THERMAL PROTECTION SYSTEM 
    Ubaid, Sabaina; Ali Hamza, Muhammad; Mukhtar, Muhammad Ali (SCME, NUST, H-12 Sector Islamabad, 2022-06)
    Thermal protection system (TPS) is an essential component of the space vehicles to protect them against the aerothermal heating that takes place during atmospheric entry. With time the demand for reusable launch vehicles ...
  • DEVELOPMENT AND CHARACTERIZATION OF CoFeNi-WC COMPOSITE 
    ur Rehman, M Muneeb; Siddique, M Ali; Mehmood, Huzaifa (SCME, NUST, H-12 Sector Islamabad, 2022-06)
    An optimum combination of strength and toughness is required in many applications. A composite material can be synthesized with tailored properties by varying the amount of reinforcement in a matrix. CoFeNi was selected ...
  • DEVELOPMENT OF AN IONTOPHORESIS SYSTEM FOR TARGETED AND EFFECTIVE TRANSDERMAL DRUG DELIVERY 
    Muzammil Tasleem,Muhammad Anas Raza,Muhammad Abdullah (SCME,NUST, 2024)
    The current deals with the Iontophoretic transdermal drug delivery system. Effective, non invasive and targeted drug delivery is a critical challenge in modern medicine. It plays a vital role in optimizing therapeutic ...
  • Development of Anti-corrosion Chemical for Surgical Instruments 
    Syed Hammad Qadeer, Abuzer Akram, Sarmad Saeed (2018)
    Corrosion is categorized as an electrochemical reaction which happens due to unwanted Contact of the metal with its corresponding surroundings. It is degradation of the metal changing its physical and as well its chemical ...

Search DSpace


Advanced Search

Browse

My Account