Mechanical Engineering: Recent submissions

  • Design, Analysis and Testing of a Transpired Solar Collector 
    PROJECT SUPERVISOR DR. TARIQ TALHA, MUHAMMAD MOIZ AHTASHAM AFZAL MUHAMMAD TALHA (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    Achieving zero-carbon or low-carbon buildings is possible by implementing innovative approaches and incorporating renewable energy sources into the building infrastructure. Thermal energy collection has become critical ...
  • Two Phase Flow Erosion Assessment in 3D Printed Agitator Blades for Cohesive and Non-Cohesive Sediments 
    PROJECT SUPERVISOR DR. MUHAMMAD REHAN KHAN, NS MUHAMMAD HASNAIN NS MUHAMMAD ADNAN IFTIKHAR (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    Agitators are significant components of many industries including chemical, food processing, water treatment industry etc. Specifically designed, mostly metallic blades are used in agitators in these processes. These ...
  • Design and Fabrication of Three Surface Abrasive Wear Test Rig 
    PROJECT SUPERVISOR Asst. Prof. Dr. Muhammad Rehan Khan, Muhammad Yasir Amin Muhammad Ahmer Khan (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    The three-surface abrasive wear test is widely employed to evaluate the wear resistance of various materials. Our research entails modifications to the traditional three-surface abrasive wear test with the aim of ...
  • Design, Analysis and Fabrication of Horizontal Axis Underwater Turbine 
    PROJECT SUPERVISOR DR TARIQ TALHA DR HASAN AFTAB SAEED, MUHAMMAD MUZAMMIL ALI MUHAMMAD AHTISHAM SAJJAD MUAZAM ZAWAR UMAIR KHALID (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    The design, analysis, fabrication, and testing of submerged hydrokinetic turbine systems are examined in this work, with an emphasis on their potential as a dependable and sustainable energy source. The goal of the ...
  • Development of Impeller-Tumbler Abrasion Test Rig for Ductile Materials 
    PROJECT SUPERVISOR Asst. Prof. Dr. Muhammad Rehan Khan, Umair Ahmed Ameer Hamza Ghulam Kibriya (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    This study explains the development of the impeller tumbler test rig developed to test the ductile material for abrasive wear. There were many industries like construction, mining, and manufacturing where abrasive ...
  • Designing a Hybrid Aeroelastic Energy Harvester for Self-Powered Applications 
    CHAUDHARY, AMIR MUNIR (College of Electrical & Mechanical Engineering (CEME), NUST, 2025)
    This study presents the concept of energy harvesting (EH) from Vortex-Induced Vibrations (VIVs) by employing two different transduction mechanisms (piezoelectric and sliding mode triboelectric), under the effect of axially ...
  • Low-velocity impact behavior assessment of 3D printed sandwiched structure with varying infill patterns 
    Abbas, Muhammad (College of Electrical & Mechanical Engineering (CEME), NUST, 2025)
    Low-velocity impact behavior poses a significant challenge to the structural integrity of 3D-printed sandwich composites, often leading to damage mechanisms such as fiber failure, matrix cracking, and delamination. ...
  • Investigation of Erosion Mitigation Using 3D Printed Twisted Tape Insert 
    Subhani, Hammad (College of Electrical & Mechanical Engineering (CEME), NUST, 2025-01)
    The aim of this research is to assess the applicability of the 3D printed twisted tape inserts for reducing erosion in pipe system under liquid-solid and liquid-solid-gas flows, a major problem in industrial environment ...
  • LEVERAGING PHYSICS-INFORMED NEURAL NETWORKS FOR BIFURCATION ANALYSIS IN THERMO-FLUID CONVECTION: PREDICTING MULTICELLULAR FLOW IN HIGH-ASPECT RATIO CAVITIES 
    Adnan, Muhammad (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    Thermo-fluid convection is a phenomenon observed across various spatial scales, from large-scale ocean currents to small, enclosed cavities, such as those found in insulating glazing units (IGUs). In these systems, ...
  • SURFACE ANALYSIS OF CHEMICAL CONVERSION AND NICKEL CHROME COATINGS ON ASTM-A516 GRADE-70 
    Ali, Raza (College of Electrical & Mechanical Engineering (CEME), NUST, 2024-10)
    In this experimental based research study, Chemical conversion coating, Chromium (Cr) and Nickel (Ni) electroplating techniques are being used to deposit anti-corrosion protective layers on ASTM-A516 Grade 17 Steel, which ...
  • Numerical Analysis and Performance Evaluation of a Flapping Airfoil in the Wake of a Bluff Body 
    Khan, Amir (College of Electrical & Mechanical Engineering (CEME), NUST, 2024-10)
    This thesis investigates the vortex interactions between a flapping airfoil and an oscillating cylinder, focusing on how the upstream cylinder’s presence influences the airfoil’s thrust performance as it moves through the ...
  • Performance Assessment of Mechanical Properties of 3D Printed ABS 
    BASHIR, MUHAMMAD ATHAR (College of Electrical & Mechanical Engineering (CEME), NUST, 2024-10)
    This research examines the mechanical characteristics of 3D-Printed Acrylonitrile Butadiene Styrene (ABS) produced through the Fused Deposition Modeling (FDM) technique. ABS was selected due to its widespread use, strength, ...
  • OPTIMIZATION OF GALLOPING-BASED ENERGY HARVESTER USING NON-LINEAR MAGNETIC FORCE 
    Tahir, Shahzaib (College of Electrical & Mechanical Engineering (CEME), NUST, 2024-09)
    This study compares the performance of a galloping-based energy harvester working in both bi-stable and mono-stable conditions. For this reason, an axially attached prismatic body having a square cross-section is considered ...
  • Performance Assessment of Modular Truss Bridge under Static Loading conditions 
    Khan, Saad Ullah (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    Bailey bridges have an elevated position in bridge design and bridge service history with everlasting impact on current bridge design formats. With commendable service in military domain, they are an economical alternative ...
  • Comparative Analysis of Monostable and Bistable Energy Harvester working under Vortex Induced Vibrations (VIV) 
    Khalid, Talha Bin (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    An efficient, eco-friendly energy generation approach has increased the potential development of harvesting wind energy via a piezoelectric transduction mechanism, which can be a feasible replacement for conventional ...
  • Design and Development of Power Generation System for Thermo-Acoustically Driven Devices 
    Muhammad Zeeshan Ur Rehman (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    This research ventured into the forefront of power generation, exploring the innovative field of thermo-acoustic devices and placing a specific emphasis on crafting a robust system. Against the backdrop of escalating ...
  • Design and Fabrication of Semi-automatic Toroidal Electromagnetic Coil Winding Machine 
    PROJECT SUPERVISOR SAHEEB AHMED KAYANI, USMAN GHAFOOR M.SHAHZAIB BALOCH TAHA FERAS (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    The Design and Fabrication of Semi-automatic Toroidal Electromagnetic Coil Winding Machine project aims to develop an innovative solution for efficiently winding toroidal electromagnetic coils. This project was undertaken ...
  • DESIGN AND FABRICATION OF A PRECISION FIN ACTUATION CONTROL SYSTEM USING LEAD SCREW 
    PROJECT SUPERVISOR Assistant Professor Saheeb Ahmad Kayani, NS Muhammad Umair Khalid NS Qasim Ali (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    Lead screws are mechanical components that are widely used for linear motion control applications in various fields. They are commonly used in systems such as syringe pumps and pan-and-tilt systems for security cameras. ...
  • DESIGNANDANALYSISOFSHOCKABSORBER 
    PROJECTSUPERVISOR Dr.NAVEED AKMAL DIN, NS MUHAMMAD ABDUL WAHAB KHAN NS SAIF UR RAHMAN FAISAL (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    There is an ever-increasing demand for automobiles. In today's rapidly evolving world, the automotiveindustry is driven bythepursuit ofenhanced efficiency and performance, leading totechnologicaladvancements.Onecrucialas ...
  • MODELING AND FABRICATION OF A SOLAR BASED ORC SYSTEM FOR STANDALONE APPLICATION 
    PROJECT SUPERVISORS LEC USMAN ZIA DR. ABDUR REHMAN MAZHAR, MUHAMMAD TALHA JAHANGIR SHABAHAT HASNAIN QAMAR OSAMA ASLAM ABDUL REHMAN (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    The purpose of this thesis was to examine the feasibility and performance of a solarbased Organic Rankine Cycle (ORC) for power generation. The study focused on employing solar irradiation as the heat source for driving ...

Search DSpace


Advanced Search

Browse

My Account