BS: Recent submissions

  • Design and Fabrication of Semi-automatic Toroidal Electromagnetic Coil Winding Machine 
    PROJECT SUPERVISOR SAHEEB AHMED KAYANI, USMAN GHAFOOR M.SHAHZAIB BALOCH TAHA FERAS (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    The Design and Fabrication of Semi-automatic Toroidal Electromagnetic Coil Winding Machine project aims to develop an innovative solution for efficiently winding toroidal electromagnetic coils. This project was undertaken ...
  • DESIGN AND FABRICATION OF A PRECISION FIN ACTUATION CONTROL SYSTEM USING LEAD SCREW 
    PROJECT SUPERVISOR Assistant Professor Saheeb Ahmad Kayani, NS Muhammad Umair Khalid NS Qasim Ali (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    Lead screws are mechanical components that are widely used for linear motion control applications in various fields. They are commonly used in systems such as syringe pumps and pan-and-tilt systems for security cameras. ...
  • DESIGNANDANALYSISOFSHOCKABSORBER 
    PROJECTSUPERVISOR Dr.NAVEED AKMAL DIN, NS MUHAMMAD ABDUL WAHAB KHAN NS SAIF UR RAHMAN FAISAL (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    There is an ever-increasing demand for automobiles. In today's rapidly evolving world, the automotiveindustry is driven bythepursuit ofenhanced efficiency and performance, leading totechnologicaladvancements.Onecrucialas ...
  • MODELING AND FABRICATION OF A SOLAR BASED ORC SYSTEM FOR STANDALONE APPLICATION 
    PROJECT SUPERVISORS LEC USMAN ZIA DR. ABDUR REHMAN MAZHAR, MUHAMMAD TALHA JAHANGIR SHABAHAT HASNAIN QAMAR OSAMA ASLAM ABDUL REHMAN (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    The purpose of this thesis was to examine the feasibility and performance of a solarbased Organic Rankine Cycle (ORC) for power generation. The study focused on employing solar irradiation as the heat source for driving ...
  • Digital Twin for Condition Monitoring 
    PROJECT SUPERVISOR AND CO-SUPERVISOR DR. IMRAN AKHTAR, ASHHAD ALI SHAHID TABREZ ASIF DAWOOD HAIDER KHAN M. YOUSUF EISA DR. ZAFAR ABBAS BANGASH (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    A digital twin is an enhanced digital representation of a real system. Digital twins can mimic the operation of physical systems and use data captured from their sensors to detect abnormal conditions and diagnose the cause ...
  • Design and Fabrication of Trans-Wing RC Plane 
    PROJECT SUPERVISOR DR. RASHID NASEER, PC MUHAMMAD RIZWAN AKHTAR ASC HAMZA ASC ALEEM AKHTAR ASC AURANG ZEB SHADAB (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    Remote-controlled (RC) planes have been a popular hobby for decades, providing a fun and engaging way to learn about the principles of heavier-than-air flight. In recent years, advances in technology have also enabled the ...
  • Design and Manufacturing of a Low-Cost Automated Misting System for Produce 
    PROJECT SUPERVISOR Dr RASHID NASEER CO-SUPERVISOR Dr ZAFAR BANGASH, NS JABEER ASGHAR NS HAFIZ ABDULLAH MUBEEN NS ALINA AZAM AWAN NS ADEEL AJMAL KHAN (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    One-third of the food produced worldwide each year is lost or wasted, which results in both a financial loss and the waste of all the natural resources necessary for food production, processing, packaging, transportation, ...
  • Design, Analysis and Fabrication of Leading Edge Tubercles (let) on Vertical Axis Wind Turbine Blade 
    PROJECT SUPERVISOR DR. TARIQ TALHA, HAROON UMER ABDULLAH AHSAN SAEED (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    The project analyzes the effect of Leading Edge Tubercle (LET) on a vertical-axis wind turbine. The Leading Edge Tubercles tend to decrease the wake region in a stream- lined body, resulting in reduced drag and avoid stall ...
  • Design, Analysis and Optimization of Bladeless Fan 
    PROJECT SUPERVISOR DR TARIQ TALHA, NS BILAL ABDULLAH ASC HAMMAD MUSTAFA PC HASNAIN BADAR NS MAHTAB UL DIN (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    The conventional ceiling fan employs fan blades to facilitate air distribution in the surrounding area, thereby inducing a cooling effect within the room. However, this airflow generates unpleasant noise resulting from the ...
  • Design and fabrication of an Ornithopter 
    PROJECT SUPERVISOR DR. IMRAN AKHTAR PROJECT CO-SUPERVISOR DR. ZAFAR BANGASH, NC ABDUL REHMAN NC DANIAL AHMAD NC IJAZ AHMED (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    Nature has always inspired us to solve our problems in a different way. Quadcopters, one of the most common and commercially available unmanned aerial vehicles, are good for cinematic shots, spying and even various other ...
  • Thermomechanical Analysis of Electic Vehicle Battery Packs 
    PROJECT SUPERVISOR DR. RAJA AMIR AZEEM, MUHAMMAD FARHAN HAIDER ALI HAIDER (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    The Battery Thermal Management System (BTMS) plays a crucial role in Electric Vehicles' (EVs) performance, safety, and longevity. The BTMS controls the battery temperature and prevents overheating or overcooling of the ...
  • Design and Fabrication of a Pico Hydropower Generation System 
    PROJECT SUPERVISOR Dr. Abdur Rehman Mazhar, Ahsen Ali Ahtasham Ahmed Virk Abdussalam Majid Muhammad Fouzan Butt (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    With an ever-increasing demand for energy and the depletion of naturally occurring resources, the focus is shifting towards devising clean and sustainable energy production methods. One of these methods is the usage of ...
  • Path Planning of Robotic Manipulator for Application of Automated Layup in Composite Manufacturing 
    PROJECT SUPERVISOR DR. RAJA AMER AZIM PROJECT CO-SUPERVISOR DR. AMIR HAMZA, MUHAMMAD TARIQ SHAH NUFAIL AHMED NADEEM FARHAN ALI (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    The project achieved the automation of the rolling process for the application of automated layup, specifically for the rolling of the pre-preg layer. However, it is important to note that the actual laying of the layers ...
  • Design and Manufacture of Low-cost Dynamometer for Small Engine 
    PROJECT SUPERVISOR Dr. Raja Amer Azim, Mohammad Sharjeel Arshad Hashmi Umer Abdur Rahman Muhammad Shahbaz Haider Nazim (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    Dynamometers are devices used to measure the torque or force. In the automotive industry, dynamometers refer to devices used to measure the torque output of an engine. Dynamometers are used throughout the world to test and ...
  • Design, Analysis And Fabrication Of Efficient Speed Breaker For Power Generation 
    PROJECT SUPERVISOR PROJECT Co. SUPERVISOR Dr. Hassan Aftab Saeed Dr. Nasir Bashir, Muhammad Haris Haider Ali Muhammad Zubair Malik Anees Ur Rehman (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
  • Design and Fabrication of a Four-Legged Robot 
    PROJECT SUPERVISOR DR. RAJA AMER AZIM, ALI ASIF ABDUL MUTAAL MUHAMMAD INAM-UL-HAQ (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    This report presents the design and implementation of a four-legged robot that can perform various locomotion tasks. The robot hardware consists of four legs, each with three degrees of freedom, and a central body that ...
  • Design and Fabrication of an E-Bicycle Conversion Kit 
    PROJECT SUPERVISOR HASAN AFTAB SAEED YASSER RIAZ AWAN, WASIF DILDAR IZHARULHAQ ABUBAKAR HANIF MUHAMMAD UMER (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    The end of the 20th century saw the warmest decade ever on record. Typically linked to the increase in the use of fossil fuels for transport and energy generation, the phenomenon of global warming caught everyone’s attention. ...
  • Design and Fabrication of Linear Gantry Robottic System to Automate Transformer Core Stacking Process 
    PROJECT SUPERVISOR DR. RAJA AMIR AZEEM, SYED ZAHID AHMAD HAIDER ALI MUHAMMAD NAEEM MIR MATEE UR REHMAN ASHRAF (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    The study highlights the solution of problem, that is not pre-engineered, through identifying the problem extensively using napkin sketch, budgeting, loads and speeds. Those key design considerations include movement, space ...
  • Design, Fabrication and Path Planning Of a Collaborative Scara 
    PROJECT SUPERVISOR ASSOC. PROF. DR. AMIR HAMZA PROF. DR. MOHSIN TIWANA ASST PROF. DR. HASAN AFTAB SAEED, NS HADI AHMED PIRZADA NS SARMAD SHOAIB IKRAM NS MUHAMMAD SAAD SOHAIL (2023)
    We aim to design, manufacture, and perform a comprehensive path planning analysis of a 4 DoF (Degree of Freedom) Collaborative SCARA (Selectively Compliant Articulated Robotic Arm). The versatile nature of the robotic ...
  • Design and Fabrication of a Bench Top Pellet Filament Extruder System for 3-D Printing Applications 
    PROJECT SUPERVISOR Lecturer Usman Zia PROJECT CO-SUPERVISOR Dr. Hasan Aftab Saeed, Mateen Ahmad Nouman Ashfaq (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    The project aims to develop an innovative and compact system capable of producing highquality 3D printing filaments from plastic pellets. The system incorporates crucial components, including a shredder for efficient ...

Search DSpace


Advanced Search

Browse

My Account