Browsing MS by Issue Date

SUPPLIER SIFT - A STRATEGIC NEED OF MODERN ENTREPRENEURSHIP

Syed Muhammad Rizwan Moeen, Supervised by Professor Dr Riaz Ahmad (SMME, 2010)

In today’s modern manufacturing where the technology and innovation has changed the production environment and put enough pressure on the entrepreneurs to redesign their production strategy and supply chains to cope up the ...

Design for Manufacture of Environmental Testing Chamber for Photovoltaic Cell

Ali Husnain, Supervised by Dr Imran Husain (SMME, 2012)

The research work will focus on the design of Photovoltaic Cell Testing Chamber. The Testing Chamber should be insulated from outside environment. The three parameters should be generated in inside testing chamber.i.e. ...

Experimental Investigation of Optimized Parameters for Open Hole Compression Strength of Carbon Epoxy Composite & Determination of Localized Strains Using Digital Image Correlation Technique

Muhammad Tayyab, Supervised by Dr Mushtaq Khan (SMME, 2012)

Composites materials have wide applications in different industries because of it has very different properties from the metals and polymers. Drilling is very common in composites to assemble different composite parts ...

EFFECT OF VARYING INITIAL PROCESSING TEMPERATURE ON MECHANICAL PROPERTIES OF CARBON COMPOSITE

Jawad Khalid, Supervised By Dr Liaqat Ali (SMME-NUST, 2012)

Carbon is most vastly applied material in the aerospace industry worldwide. It is utilized in many forms and with a variety of resin combinations. An unmanned aerial system made from carbon composite was manufactured which ...

Optimization of Process Parameters of Austenitic Stainless Steel 304L with Low Carbon Steel A-36 by using Plasma Arc Welding (PAW

Shan-e-Fatima, Supervised By Dr Mushtaq Khan (SMME-NUST, 2012)

Dissimilar metal welding of Austenitic Stainless Steel and Carbon Steel is highly in demand in pressure vessels, boilers, heat exchangers of power generation industry including Nuclear power Plants and Oil refinery plants. ...

Honeycomb Structures Designing, Manufacturing and Testing using Aluminium as a Material for Airframe Applications

Muhammad Salman Khan, Supervised By Dr Mushtaq Khan (SMME-NUST, 2012)

This article describes the man-made honeycomb structures which are used for many applications ranging from aerospace industries, shipbuilding, automotive and furniture to packaging, logistics, woodworking, audio and sports. ...

Design and Development of Biodiesel Processing Plant and Linear Optimization of Screw Press /

Ihsan, Abbas (School of Mechanical & Manufacturing Engineering (SMME), NUST, 2012)

Optimization and Analysis of Cutting Parameters Using Cryogenic Media in Machining of Alloy Steel (D406A)

Waseem Tahir, Supervised By Dr Hussain Imran (SMME-NUST, 2013)

The competitive production / manufacturing setups always try to adopt such techniques that provide a quality product within a limited time, especially development of manufacturing process / parameters for new products. ...

Analysis of Existing Assembly Line for Manufacturing of Wheeled Security Vehicle (Mohafiz-II) in APC Factory and Propose a Re-configured Assembly Path

USMAN ATTIQUE, Supervised By Dr Abdul Ghafoor (SMME-NUST, 2013)

Assembly line of Wheeled Security Vehicle (MUHAFIZ) has been studied to analyze and evaluate the present system of manufacturing the vehicle with a view to balance the assembly line, eliminate wastes, reduce balance delay, ...

Investigation of an integrated flow-cytometry chip using hydro-dynamic focusing and cell sorting

JAHANZEB IKRAM, Supervised By Dr Emad ud Din (SMME-NUST, 2014)

Recent years have seen a growing focus in the field of microfluidic technology as a powerful tool in medical diagnostic research. Micro-flow cytometers, micro mixers, cell sorters and cell analysers are only a few examples. ...

OPTIMIZATION OF CEILING FAN BLADES USING DESIGN OF EXPERIMENTS & RESPONSE SURFACE METHOD

SHAMRAIZ AHMAD, Supervised By Dr Riaz Ahmad Mufti (SMME-NUST, 2014)

Modeling And Analysis Of Propeller Blades & Application Of Various Non-Destructive Testing Techniques

Raja, M Yasir Anwar (School of Mechanical & Manufacturing Engineering (SMME), NUST, 2014)

Enhancing the Oxygen Carrying Capacity of a Fighter Jet Aircraft in Order to Facilitate the Increase in Aircraft Endurance

Ali, Sharaf (School of Mechanical & Manufacturing Engineering (SMME), NUST, 2014)

Finite Element Simulation Comparison of Plastic Injection Molding Cooling Systems

Mustafa, Omer (School of Mechanical & Manufacturing Engineering (SMME), NUST, 2014)

DUAL WELDING OF HIGH STRENGTH LOW ALLOY (HSLA) STEEL AND COMPARISON OF MECHANICAL PROPERTIES WITH INDIVIDUAL WELDING PROCESSES

MUHAMMAD IJAZ AFZAL, Supervised By Dr Shahid Ikram Ullah (SMME-NUST, 2015)

Welding is a major joining technique employed in hi-tech industries like in nuclear, aerospace and aeronautical, submarine and shipbuilding and pressure vessel applications for the production of high performing resilient ...

Solving Type 2 Simple Assembly Line Balancing Problem through a Direct Ant Colony Optimization Technique

Pakeeza Bukhari, Supervised By Dr Riaz Ahmad Mufti (SMME-NUST, 2015)

An assembly line consists of work stations where specific tasks are carried in such a way that last station gives the complete product. The setup of assembly lines involves high capital investment while day by day ...

To Design, Develop and Test Strain Gauge Based Dynamometer for Measuring Cutting Forces in Turning

SYED WAQAR HYDER KAZMI, Supervised By Dr Mushtaq Khan (SMME-NUST, 2015)

A great amount of engineering world uses processes like casting, molding and forming for manufacturing of products of distinct shapes and sizes to satisfy customer’s needs. But to attain final and fine shape of the product ...

Productivity improvement in informal furniture manufacturing- A case of PAK-GERMAN WOOD WORKING CENTRE, PESHAWAR, KPK

SAIF ULLAH KHATTAK, Supervised By Dr Khalid akhtar (SMME-NUST, 2015)

APU Design and Project Scheduling

Hamid Mahmood, Supervised By Dr Liaqat Ali (SMME-NUST, 2015)

In manufacturing industry, projects require large amount of money and human effort. But due to project complexity, many projects get delayed and cost overrun puts the progress of project at stake. It is at the core of ...

Manufacturing Facility layout Design of APU and Quality Control

Ammar Ali, Supervised By Dr Liaqat Ali (SMME-NUST, 2015)

In manufacturing industry, projects require large amount of money and human effort. But due to project complexity, many projects get delayed and cost overrun puts the progress of project at stake. It is at the core of ...

Browsing MS by Issue Date

Browsing MS by Issue Date

Search DSpace

Browse

All of DSpace

This Collection

My Account