BS: Recent submissions

  • DESIGN AND DEVELOPMENT OF A TURBOFAN ENGINE FOR A UNMANNED AERIAL VEHICLE 
    Ramish Durab Khan- Muhammad Uzair Javed- Muhammad Naeem, Supervised By Dr Emad ud Din (SMME-NUST, 2018)
    Turbofan, or fanjet engines are one of the most widely used jet engines in aircraft propulsion. The word turbofan is derived from turbine fan. The turbofan engine uses the mechanical energy from the gas turbine to drive a ...
  • SEA BIN 
    M.Iqtadar Khan- M.Umar Tariq- M.Zain Bin Ilyas., Supervised By Dr Muhammad Sajid (SMME-NUST, 2018)
    Sea bin is a project inspired by similar project being done by some of the sailors in Australia that aims to create cleaner oceans, lakes and ponds and eliminate the threats posed, because of the contamination of waste ...
  • Design and Development of Moblie Harbour 
    UMER FAROOQ- MOHAMMAD ABDUL REHMAN- SARMAD FARID, Supervised By Dr Emad ud Din (SMME-NUST, 2018)
    Recent trends in marine cargo transportation market include continued increase in global container shipping volume and the introduction of mega-sized containerships. It implies that container cargo handling capacity, ...
  • Design and Manufacturing of HydRotor 
    Mohammad Ali Yaqteen Muhammad Azeem Ali Sarmad Saleem, Supervised By Dr Zaib Ali (SMME-NUST, 2018)
    This work presented here describes the design of a power generation system that could be used in open channel water flow with low flow velocities. The purpose is to make a turbine that could provide for the power requirements ...
  • DESIGN, ANALYSIS AND FABRICATION OF AN OFF ROAD TRAILER 
    ALI IMTISAL NAQI SAEED ULLAH KHAN OMAR ALI KHAN, Supervised By Dr Sami ur Rehman shah (SMME, 2018)
    Modern Heavy duty vehicles are commonly used to transport heavy goods, materials from one place to another by carrying out best performance in transportation. Due to the running condition of vehicle as well as engine, there ...
  • Non-Enzymatic Sensing of Acephate as Model Organophosphate Based on Graphene/Tetraphenylporphyrin Nanocomposites Modified Glassy Carbon Electrode 
    Muhammad Tayyab Ishaq (NUST, 2018)
    Extensive use of organophosphate pesticides has caused life threatening problems. They inhibits the acetylcholinesterase whose function is to destroy acetylcholine after transmission of signals. Scientists are working ...
  • Porphyrin/Graphene Based Electrochemical Nanosensors for the Detection of Nerve Agent Simulant Dimethyl Methylphosphonate (DMMP) 
    Muhammad Shahbaz (NUST, 2019)
    Dimethyl methylphosphonate (DMMP) a nerve agent simulant was electrochemically detected in aqueous media by reduced graphene oxide (RGO)/tetraphenylporphyrin (TPP), RGO/zinc tetraphenylporphyrin (Zn-TPP), RGO/5,10,15,2 ...
  • Synthesis, Characterization and Antibacterial Activity of Nano-Magnesium Nickel Oxide 
    Dr. Zahida Malik (NUST, 2017)
    Mg1-xNixO (0.43 ≤ x ≤0.53) nanoparticles have been successfully synthesized via sol-gel methodology by using nitrates as the precursors of metal ions. We present the first report on the synthesis and antibacterial activity ...
  • DESIGNING AND DEVELOPMENT OF A TENDON-INSPIRED ROBOTIC MANIPULATOR 
    Huzaifa Kafeel Fazeel Ahmed Zohaa Wajid (NUST, 2018)
    This report contains the work done so far in the design and manufacturing of a Robot Arm with a focus towards Human Robot Interaction. The document starts off with the literature review of the existing works in the field ...
  • Wearable Personal Cooling System 
    Afrasiab Shah Abdullah Azzam Haider Khan (SMME-NUST, 2018)
    Heat Stroke is a major problem these days. A lot of people from hot temperature environments are suffering from the very decease and many of the lot have died due to the very decease. A device is needed to be developed to ...
  • ARTIFICIAL BIO-INSPIRED HYBRID MUSCLE 
    Fahd Imtiaz Ibrahim Bin Yasir Muhammad Umer Khan Niazi (NUST, 2018)
    Soft bodied actuator mechanisms exist as an alternative to Rigid bodied actuator mechanisms for applications where smoother actuation rates, better power to weight ratios and conformability to shape are required. But since ...
  • DEVELOPMENT OF A HUMIDIFICATION DEHUMIDIFICATION (HDH) DESALINATION SYSTEM 
    Ch Asad Rasool Muhammad Ersalan Anwar Umair Aziz Awan (NUST, 2018)
    Fresh water is one of most precious resources on earth. At present the world is facing a crisis of fresh drinking water. Over the years many different desalination techniques have be proposed to help overcome this problem. ...
  • DESIGN, DEVELOPMENT AND CONTROL OF HAND EXOSKELETON SYSTEM 
    Abdul Rehman Hamza Butt Muhammad Hamza Javed (NUST, 2018)
    Numerous people around the world suffer from hand paralysis which results in loss of motor function. Along with the disability, comes the burden of care towards caretakers. With paralysis, the dependency of the inflicted ...
  • DESIGN AND DEVELOPMENT OF ADJUSTABLE RANGE OF MOTION KNEE AND ELBOW BRACES 
    Attiq ur Rehman Ahmad Nadeem Saigol (NUST, 2018)
    Our project is focused on the design and development of wearable post-operative Knee and Elbow brace with adjustable range of motion for upper and lower limb rehabilitation. In order to in cooperate adjustable range of ...
  • IMPROVING EFFICIENCY OF DOMESTIC GEYSER 
    MOHSIN TANVEER MUHAMMAD SHAHARYAR AMJAD TALHA BIN TAHIR (NUST, 2018)
    Due to the depletion of natural resources including natural gas there is a demand to develop new methods and techniques to efficiently use the existing resources. Gas geysers are being used for water heating at homes and ...
  • DESICCANT BASED EVAPORATIVE AIR CONDITIONING SYSTEM 
    SHAH RUKH KHAN M. HANZALA MUNAWAR MAWAHID ALI KHOKHAR (NUST, 2018)
    Conventional Vapor Compression system fails to provide comfort conditions in humid areas where it is important to control the latent load of the environment as it deals with the sensible load only. Moreover, the refrigerants ...
  • Design and manufacturing of a setup for the testing and evaluation of a motor vehicle’s front fog lamps simulating fog effects using a filter 
    Majid Ali Saad Hassan Shaheer Anjum (NUST, 2017)
    Basic purpose of the project is to design and manufacture a laboratory mounted set up for testing and evaluating the performances of different fog lamps in foggy conditions, and achieving simulation of fog by designing ...
  • DESIGN AND DEVELOPMENT OF A SHIM STACK VISCOUS DAMPER 
    Muhammad Muneeb Arshad Muhammad Uzair Sajjad Azan Akhtar (NUST, 2018)
    Shock absorber is a device which is used to reduce the effect of shock impulses by damping them and dissipate kinetic energy. It is used to improve the quality of ride, as well as comfort level, by substantially reducing ...
  • 3D Sand Printer 
    M. Yousaf Shahid Faizan Rashid Yasir Nazir (NUST, 2018)
    The conventional Sand casting requires storage of pattern so foundries can again pack sand around them to make a new mold when in batch production or the order is placed again. They have to fabricate according to the ...
  • Solar Biomass Hybrid Dryer 
    Nouman Iqbal M.Abdullah Sarfraz Zain Haider (NUST, 2018)
    Poor drying and processing techniques used by the farmers have led to loss of quantity and quality of agricultural crops. Drying is one of the technique for protection of fruits and vegetable but also an energy consuming ...

Search DSpace


Advanced Search

Browse

My Account