BS: Recent submissions

  • DESIGN AND CRASHWORTHINESS ANALYSIS OF A LANDING GEAR STRUT FOR A UAV 
    Abdul Wasay Ikhlaq- Muhammad Uzair Malik -Syed Adil Hasan Naqvi, Supervised By Dr Jawad Aslam (SMME-NUST, 2019)
    Unmanned Armed Vehicles (UAVs) are used in surveillance, offensive, and other tactical operations by the military of several countries of the world including Pakistan. The landing gear system of these UAVs has to be robust ...
  • DESIGN AND MANUFACTURING OF 4 WHEELED HUMAN POWERED VEHICLE 
    WAJIH UL HASSAN- TAHIR HAYAT, Supervised By Dr Hussain Imran (SMME-NUST, 2018)
    Transportation has been essential in the development of the human society. People have become closer than they have ever been thanks to inventions like the car, aero plane and so on. But due to the increase in their use ...
  • DIRECT CONTACT MEMBRANE DISTILLATION UNIT 
    Muhammad Talha- Muhammad Saad Anwar- Syed Saad Bin Shariq Mehtab- Abdur Rehman Sarwar, Supervised By Dr Zaib Ali (SMME-NUST, 2019)
    The basic purpose of this project is to produce clean and pure water abundantly. A direct contact membrane distillation closed loop setup is used in this project to clean the brackish and sea water. The project uses a ...
  • EXPERIMENTATION AND MODELLING OF OXIDE CONDUCTING FUEL CELL WORKING ON INDUSTRIAL WASTE 
    Fahd Rehman- Muhammad Ahsan- Usama Rehman- Muhammad Khizar, Supervised By Lec Abdur Rehman (SMME-NUST, 2019)
    The use of conventional energy conversion devices like internal combustion engines and batteries has certain disadvantages including higher emissions of greenhouse gases (which are a threat to the environment contributing ...
  • EXPERIMENTAL ANALYSIS OF INSTANTANEOUS ROLLER SLIP 
    Muhammad Waleed Bin Khalid- Shahzeb Aamir- Uzair Ahmad, Supervised By Dr Riaz Ahmad Mufti (SMME-NUST, 2019)
    Constant strides are being made to improve vehicle efficiencies in order to reduce fuel consumption, meet environmental regulations and increase longevity of engine components. One key areas of focus to do the same is the ...
  • HYBRID WATER HEATING SYSTEM 
    Muhammad Usman Akhtar- Muhammad Moeen Arshad- Osman Ghani Niazi- Ali Raza, Supervised By Lec Muhammad Umer, (SMME-NUST, 2019)
    Solar hybrid water heating system is actually the axillary system coupled with existed gas or electric water heating systems. In this project we used the active solar water heating system. Flat plate collector is opted ...
  • Thermal Characterization and Management of Commercially Available Photovoltaic Cells 
    Muhammad Nouman Ihsan- Safwan Nasir- Hassan Jalil, Supervised By Dr Muhammad Sajid (SMME-NUST, 2019)
    The solar simulator already present in SMME has been redesigned to study the electrical performance of photovoltaic cells with variations in light intensity and temperature, and effect of different thermal management ...
  • MULTI-OBJECTIVE OPTIMIZATION OF A STEALTH UNMANNED COMBAT AERIAL VEHICLE 
    Ammar Akram- Muhammad Fahad Zahid- Muhammad Ahsan Aziz, Supervised By Dr Emad ud Din (SMME-NUST, 2019)
    For Unmanned Combat Aerial Vehicles (UCAVs) operating during wartime, the mission objective is dependent on the survivability of the UCAV, which depends on two things: 1. Its ability to evade detection by enemy radars and ...
  • DESIGN AND FABRICATION OF PILE CAGE WELDING MACHINE 
    HAMZA KHIZAR- MUHAMMAD AWAIS SULTAN- RAFEY MEHMOOD ALAM, Supervised By Dr Emad ud Din (SMME-NUST, 2019)
    With the perpetual increment in volume of infrastructure development across the globe, the need for creation of efficient and cost effective ways of optimization of construction procedures has become inevitable. Specifically, ...
  • Design of Micro-Electric Discharge Machine 
    Abdullah Tiwana- Ahmad Takreem- Muhammad Usama- Osama Maqsood Janjua, Supervised By Dr Mushtaq Khan (SMME-NUST, 2015)
    Machining is crucial to the design of components used in every industry. But as the industrial world moves towards sophistication and improves their component design by increasing their surface smoothness, reducing their ...
  • DESIGN AND MANUFACTURING OF A FUEL-EFFICIENT INTERNAL COMBUSTION ENGINE 
    Taimoor Asif -Abu Bakar Nazir, Supervised By Dr Sami ur Rehman shah (SMME-NUST, 2019)
    In today’s day and age, where there is a scarcity of fossil fuels, increase in pollution, and global warming, fuel efficient vehicles have become a need of the hour. Fuel efficiency also brings along a cleaner and greener ...
  • Design and Development of Bipedal Hopping Robot 
    Aashir Iqbal- Ahmed Alam Ansari- Hamza Arif- Junaid Ahmed, Supervised By Dr Yasar Ayaz (SMME-NUST, 2019)
    Legged robots represent a class of ground robots that make use of articulated linkages to move about. In juxtaposition to wheeled robots, legged robots can exploit discontinuous pathways and isolated footholds, thereby ...
  • DESIGN AND DEVELOPMENT OF ELECTRO-HYDRAULIC SYSTEM FOR STABILIZING ASYMMETRIC LOADS 
    Muhammad Aqil Khan- Muhammad Hashaam Zaheer- Osaid Ahmad -Umair Jamal, Supervised By Dr Jawad Aslam (SMME-NUST, 2019)
    In this study the performance of hydraulic system is analyzed by incorporating 4 port 3 position servo valve. The task is to stabilize a platform by implying a closed loop feedback control. Effect of load variations on ...
  • SOLAR DESICCANT EVAPORATIVE COOLING 
    Muhammad Ehsan Ullah Kayani- Syed Shan E Haider Zaidi- Tashfeen Ali Ahmed- Usama Ishaq, Supervised By Lec Abdur Rehman (SMME-NUST, 2019)
    Vapor Compression Cooling systems are creating a lot of problems for mankind including destruction of ozone layer and global warming due to emission of greenhouse gases. Secondly they have substantially high energy ...
  • VERTICAL AXIS HYDROKINETIC GORLOV TURBINE FOR LOW FLOW AND LOW HEAD CONDITIONS 
    Syed Mazhar Abbas Naqvi- Saad Tahir- Zain Ahmed, Supervised By Dr Muhammad Sajid (SMME-NUST, 2019)
    Pakistan is a developing country that is currently facing severe power demand-supply gap due to high population, rapid urbanization and traditional means of power generation. The heavy dependence of power sector on imported ...
  • BLADELESS VORTEX WIND TURBINE 
    Hissam Karim- Muhammad Afraz Khilji -Ali Raza, Supervised By Title (faculty rank) Affiliation (SMME-NUST, 2019)
    The energy crisis in Pakistan and the green energy crisis in the world is the necessary push towards the research and development of the new and better ways of energy production for the future energy production as well as ...
  • Ejector for Vacuum Distillation Ejector System 
    Muhammad Daniyal Khalid- Bilal Ahmed Khan- Aqib Mehmood-Mirza Muhammad Ibraheem, Supervised By Dr Emad ud Din (SMME-NUST, 2019)
    The following report deals with the designing and analysis of steam/gas ejector. Inlet pressure, mass flow rate and temperature of both primary fluid and secondary fluid, back pressure of diffuser, temperature of mixed ...
  • DESIGN AND DEVELOPMENT OF AN ELECTRIC WHEEL 
    Usama Awais Chaudry- Rao Muhammad Ihsan -Aiza Waseem, Supervised By Dr Mian Ashfaq Ali (SMME-NUST, 2018)
    Owing to the rapid increase in global warming over the past few years, the demand for non-polluting mechanized transportation has grown substantially in lieu of fossil fuel driven automobiles. The least expensive and ...
  • Optimization of fuel efficiency by installing EFI in a Carburetor Engine. 
    Muhammad Owais- Shahzad Ahmad- Muhammad Aazaan, Supervised By Dr Sami ur Rehman shah (SMME-NUST, 2018)
    The project is based upon conversion of a carburetor engine into an electronic fuel injection system one. This aims to achieve better fuel efficiency and achieve desirable emissions standards which are not possible in ...
  • ANALYSIS AND IMPROVEMENT IN ASD THERAPIES USING ROBOTICS 
    Rao Muhammad Danial- Izza Ali- Syed Raheem Haider Bukhari, Supervised By Dr Yasar Ayaz (SMME-NUST, 2018)
    Autism is a neurodevelopment disorder affecting 7.5 million people around the world. 1 in 42 boys have autism and there is no cure for this. Child suffering from autism challenges with social skills, repetitive behaviors, ...

Search DSpace


Advanced Search

Browse

My Account