DSpace Home
→
E-Theses
→
SCME
→
Materials Engineering
→
MS
→
Recent submissions

MS: Recent submissions

Now showing items 121-140 of 364

Development of Flexible Conductive Polymer based Nanocomposites for EMI Shielding Application

Ahmed, Ahsan (National University of Sciences and Technology (NUST) School of Chemical and Materials Engineering (SCME), 2022-12)

The swift developments in the field of telecommunication in general and wireless telecommunications has brought about revolutionary and modernized changes in our society. At the same time due to this development a new ...
Development of Surface Pretreatments of Aluminum Alloy EN AW-6061 for Metal-Polymer Hybrid Joints

Naeem, Usama (SCME, NUST, H-12 Sector Islamabad, 2022-08)

Surface pretreatments of aluminum alloys are known to be of great importance for stronger and environmentally stable adhesively bonded joints. Aluminum alloy adhesive joints offer a wide range of potential applications in ...
Enhancement of Output Performance of Hybrid TENG-PENG by Employment of Micro-Pyramid Surface Morphology for Energy Harvesting Application

Asif, Fiza (SCME, NUST, H-12 Sector Islamabad, 2022-08)

Energy consumption has drastically increased in the past few decades. Fossil fuels occupy the main chunk of the energy sector. But this has globally caused many issues due to increasing carbon percentage in the world. To ...
End-of-Life Material Waste Quantification and Management for Renewable Energy Capacity Additions in Pakistan By Muhammad Ahsan

Ashraf, Muhammad Ahsan (SCME, NUST, H-12 Sector Islamabad, 2022-08)

Renewable energy is leading the path to reduce the dependence on fossil fuels. Global warming is a serious threat to the environment and renewable energy can minimize the contribution of the power sector’s contribution. ...
Corrosion Protection of Medium Carbon Steel in Acidic Environment Using Novel Schiff Base Inhibitor

Hasan, Wareesha (SCME, NUST, H-12 Sector Islamabad, 2022-09)

The aim of this research work was to investigate the inhibition efficiency of an organic inhibitor added in different concentration under 0.1M, 0.5M and 1M HCl. Medium Carbon steel was used for the study of corrosion rate. ...
Defect Generation in Layered Double Hydroxide Nanostructures for Water Splitting By

Rana, Muhammad Abubakar (SCME, NUST, H-12 Sector Islamabad, 2022-08)

The development of a highly active and low-cost catalysts for OER applications is very demanding. To improve the electrocatalytic performance of the catalyst, in this work, four Ni-Fe LDHs were synthesized by employing ...
Nickel-Cobalt Layered Double Hydroxide Coated Over SS-304 for Electrocatalytic Hydrogen and Oxygen Production

Hamid, Ajmal (SCME, NUST, H-12 Sector Islamabad, 2022-06)

Electrochemical water splitting with renewable electricity is being studied as a long-term, clean, and significant source of hydrogen for transportation and energy uses. However, despite the lower istability iof ithese ...
Indigenous Fabrication and Characterization of Ceramic Composite Ballistic Armour

Bashir, Muhammad Shahid (SCME, NUST, H-12 Sector Islamabad, 2022-08)

In this research work, Al2O3 based ballistic ceramic tiles were manufactured indigenously using locally available resources. Performance measurements and analysis of genuine armour were conducted to analyzed their properties ...
THE EFFECT OF SINTERING ADDITIVES ON THE MECHANICAL PROPERTIES OF LIQUID PHASE PRESSURE-LESS SINTERED ALUMINA

Monir, Nasbah (SCME, NUST, H-12 Sector Islamabad, 2022-09)

Al2O3 is one of the most used ceramic oxides that finds a lot of structural applications. The thesis explores a low temperature sintering route of alumina through the addition of sintering additives that employ a hybrid ...
Fabrication and Characterization of Advanced NbC Cutting Tool Cermets

Malik, Asad (SCME, NUST, H-12 Sector Islamabad, 2022-08)

NbC-Ni cermets have recently come under attention as a possible green alternative to WC-Co cemented carbide tools due to their mutagenic/carcinogenic behavior. To improve base NbC-Ni cermets multipronged approach was ...
To Study the Effect of Reinforcements on the Mechanical and Corrosion Behavior of Electrodeposited Ni-W-P Ternary Alloy Coatings

Kousar, Humaira (SCME, NUST, H-12 Sector Islamabad, 2022-05)

Ni-W-P based coatings offer promising properties such as superior hardness, wear resistance and high corrosion resistance. The emphasis of this evaluation has been put on improvement of mechanical and corrosion resistant ...
Facile Hydrothermal Synthesis of Hierarchically Mesoporous Nickel-Cobalt Selenide (NiCoSe) Nanowires for High Performance Supercapacitors

Waqar, Muhammad (SCME, NUST, H-12 Sector Islamabad, 2022-06)

Hierarchical mesoporous Nano-wires nickel-cobalt oxide at nickel cobalt selenide (core/ shell) has been established as a promising electrode material due to the synergic enhancement effect of cobalt cations replacement ...
Fabrication and characterization of Mechanically Alloyed NiCoCrFe based High Entropy Alloy and Composites

Nisar, Fatima (SCME, NUST, H-12 Sector Islamabad, 2021-04)

Single phase face-centered cubic (fcc) high entropy alloys (HEAs) are being extensively explored due to their excellent ductility and strength. Reinforcements are generally added to further enhance the mechanical properties ...
Development of MoS2-ZnO Heterostructures: An efficient Bifunctional Catalyst for the Detection of Glucose and Degradation of Toxic Organic Dyes

Ali, Farhan (SCME, NUST, H-12 Sector Islamabad, 2022-06)

Synthesis, Characterizations of Molybdenum disulfide& Zinc oxide for Photo catalysis & bio sensing application is reported in this work. The material was synthesized using two step hydrothermal route from Sodium Molybdate, ...
Synthesis and Characterization of Transition Metals Doped Strontium Hexaferrite Nanoparticles for Visible light Photocatalysis

Rafiq, Tayyab (SCME, NUST, H-12 Sector Islamabad, 2021-07)

From the last decade the hexagonal ferrite has been tremendous interest due to its novel properties like mechanical strengthen, chemical stable and high magnetic coercivity make it useful in electronic and scientific ...
SYNTHESIS AND FABRICATION OF LASER SCRIBED NANO-COMPOSITES FOR STRAIN SENSING

Iqra, Maham; Iqra, Maham (SCME, NUST, H-12 Sector IslamabadSCME, NUST, H-12 Sector Islamabad, 2021-07)

Flexible Strain sensors are an important constituent in soft robotics, health care devices and defense industry. In flexible strain sensors, achieving consistency and high sensitivity has always been challenging. A number ...
Synthesis and Characterization of Cobalt and Nickel Doped in Barium Hexaferrite Nanoparticles for Photocatalysis

Jahanzaib, Muhammad (SCME, NUST, H-12 Sector Islamabad, 2021-05)

The exceptionally unique magnetic and electric properties of ferrites have always been of strong interest leading to their extensive commercial use. Barium hexaferrite, is one of the materials being used in microwave, ...
Facile Synthesis of Binary Metal Selenide/Graphene Composite for Efficient Lithium-Ion Batteries

Mehmood, Ahtisam; Mehmood, Ahtisam (SCME, NUST, H-12 Sector IslamabadSCME, NUST, H-12 Sector Islamabad, 2022-06)

During the last few decades, rapid industrialization not only resulted in the depletion of natural energy resources but also raised serious energy crises. Renewable energy resources are the most suitable alternative to ...
Synthesis of TiO2/NbSe2 Nanocomposites for Electrochemical Supercapacitors and Photodegradation of Organic Dyes

Ujala, Amna; Ujala, Amna (SCME, NUST, H-12 Sector IslamabadSCME, NUST, H-12 Sector Islamabad, 2022-06)

In the present study synthesis of 2D nanosheets/nanoparticles base TiO2/NbSe2 nanocomposites were composed in different weight percent. The concentration of TiO2 is varied as 1, 2,5,10,20,50,80 weight percent with respect ...
Synthesis and Characterization of Graphene and Molybdenum Disulfide based multilayered 2D Nanomaterials for EMI Shielding Analysis

Muhammad Sajid, Hafiz Muhammad (SCME, NUST, H-12 Sector Islamabad, 2022-05)

It is still very challenging to effectively design the nanocomposites microstructures which significantly improve their electromagnetic interference shielding effectiveness (EMI SE). Herein, we developed a facile method ...

Now showing items 121-140 of 364

Search DSpace

Advanced Search

Browse

All of DSpace
This Collection
- By Issue Date
- Authors
- Titles
- Subjects

Recently added

MS: Recent submissions

Search DSpace

Browse

All of DSpace

This Collection

My Account