BS: Recent submissions

  • Design and development of AI based autonomous drone 
    PROJECT SUPERVISOR DR. MOHSIN KHALIL, SHEIKH MUHAMMAD BIN KHALID ABDULLAH ASHRAF HASSAN RAZA SABIR MUHAMMAD UMAIR SIDDIQUE (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    The project focuses on creating an unmanned aerial vehicle (UAV) equipped with an autonomous flight controller and an onboard computer for object detection. The UAV is designed to execute various tasks independently, ...
  • Design and fabrication of 3D printer 
    PROJECT SUPERVISOR Dr. Rashid Naseer, Abdullah Ijaz Muhammad Muaz Nasir Muhammad Saim Qamar (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    This project centered on the development of a custom 3D printer, distinct from commercially available models. The initiative involved a thorough literature review, procurement and use of locally available, cost-effective ...
  • Development of Smart Hybrid Electric and Gas Water Heater 
    PROJECT SUPERVISOR DR ABDUR REHMAN MAZHAR, LAIBA MEMON SYED MUHAMMAD NABEEL WASTI MUHAMMAD TALHA AWAD AAMIR (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    Pakistan is facing major energy crisis, with frequent power outages and gas shortages. A good percentage of electricity is provided to households where water heating is extremely important especially in the months of ...
  • Retrofitting Domestic Gas Appliances with Automated Mechanical Shut-Off Valve 
    PROJECT SUPERVISOR Hasan Aftab Saeed PROJECT CO-SUPERVISOR Yasser Riaz Awan, Sufyan Ayub Muhammad Usama Jamil Hasnain Abbas Sarfraz Ahmad (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    We aim to design and manufacture automatic mechanical shut-off valves for retrofitting already existing domestic gas appliances with the funding provided by PEC. The versatile nature of this safety valve enables it to ...
  • Redesign of Bench Top Pellet Filament Extruder System and Fabrication of Spooling Mechanism 
    Project Supervisor Lec. Usman Zia Project Co-supervisor Dr. Rehan, Abdul Haseeb Khan Muhammad Hussain Shanawar Shoukat (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    The project aims to develop an efficient extruder design for producing accurate standard size filaments along with fabrication of spooling mechanism. Accuracy in filament diameter can be accomplished by improving heating ...
  • Development of Bio-Compatible, Bio-Degradable Polymers for 3D Printed Orthopedic Implants 
    PROJECT SUPERVISOR Asst. Prof. Dr. Hassan Aftab Saeed Asst. Prof. Yasser Riaz Awan, Muhammad Mohid Aziz Abdul Haseeb Shakil Hafeez Istafa Sajid Qureshi (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    The demand for biodegradable materials has exponentially increased in several biomedical applications due to the emphasis on environmental sustainability. 3D printing, specifically using the Fused Deposition Modeling ...
  • Designing and Manufacturing of Portable Electric Mobility Scooter 
    PROJECT SUPERVISOR ASST PROF DR. NAVEED AKMAL DIN, MUHAMMAD TARIQ FAROOQ SAMEER MUJEEB REHMAN MUHAMMAD FAIZAN MUHAMMAD ASIF (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    Mobility scooters have become central aid for individuals with mobility impairments. However, the high cost of market-available mobility scooters limits their accessibility to those who need them the most. This project ...
  • Impact Resistance and Damage Tolerance Improvements of Fiber Reinforced Composites through Hybridization Technique 
    PROJECT SUPERVISOR Asst. Prof. Dr. Zubair Sajid (Supervisor) Asst. Prof. Dr. Muhammad Rehan Khan (co-supervisor), Bilal Aurangzeb Khalid Zia Khan Muhammad Khizar Muhammad Talha Naeem (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    Low velocity impact (LVI) poses a formidable challenge to the composite industry, precipitating intricate failure mechanisms and internal damage that undermine the structural integrity of Fiber-reinforced composites ...
  • Prediction of Wear Performance of Elbow Pipe for Sand-laden Multiphase Flow 
    PROJECT SUPERVISOR Dr Muhammad Rehan Khan Co supervisor Dr Zubair Sajid, Abdul Saboor Khan Abdullah Bin Shahid Zaheer Uddin Azhar (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    This experiment involves the erosion process in a pipe bend reducer by 90 degrees in multi-phase flow. An experimental specimen was manufactured using a reducer pipe made of 3D-printed Polylactic Acid (PLA) material. ...
  • Effects of environmental aging on the mechanical properties of synthetic-natural fiber reinforced hybrid composites 
    PROJECT SUPERVISOR Dr. ZUBAIR SAJID Dr. REHAN KHAN, ROMMAN AHMED MUHAMMAD SHAHROZ QASIM MUSHTAQ MUHAMMAD USMAN MALIK (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    This final report serves the purpose of demonstrating the advancements made in our final year project, which focuses on investigating the impacts of environmental aging (hygrothermal and hydrothermal) on synthetic-natural ...
  • Crack Analysis in Friction Stir Welded Plates 
    PROJECT SUPERVISOR Dr. Hasan Aftab Saeed PROJECT CO SUPERVISOR Sir Yasser Riaz Awan, NC Faryal Awan NC Muhammad Muaaz Ali NC Muhammad Umer Mughal NC Rizwan Ahmed (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    This project presents a detailed crack analysis of friction stir welded (FSW) plates of Al 6061 using ABAQUS, a finite element analysis software. The study aims to investigate the fracture behavior and crack propagation ...
  • Study of Open Hole Tensile Behaviour using Synthetic-Natural Hybrid Composites 
    PROJECT SUPERVISORS DR. ZUBAIR SAJID DR. MUHAMMAD REHAN KHAN, NS ALI NAWAZ KHAN (332506) NS MAAZ AHMED (341088) PC UMER REHMAN (359107) NS SHAHROZ ALI (333570) (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    In this study, we focus on the hybrid composite design for the increased open hole performance and to evaluate the inter-ply hybridization effects on open hole failure mechanisms. The purpose of this project is to ...
  • Design and Fabrication of Weeding Robot 
    PROJECT SUPERVISORS DR RAJA AMER AZIM & DR KHAWAJA FAHAD IQBAL, MUHAMMAD UMAR KHATTAB MUHAMMAD HASSAN MASOOD SHAHZAIB RIAZ (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    Weeds in Pakistan's fields are estimated to cause a loss of up to 36 million tons of crops every year. This loss is worth about 3 billion US dollars annually. This damage from weeds is even greater than the harm caused ...
  • Digital Twin of Regenerative Pump for Performance Evaluation 
    PROJECT SUPERVISOR Brig. Dr. Imran Akhtar, Muhammad Abdullah Amin Mufti Muhammad Haseem Khan Junaid Ahmed Sarim Farqaleet Khan (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    In an era marked by rapid technological advancements, digital twin technology has emerged as a revolutionary concept, bridging the gap between physical and digital realms. A digital twin is a dynamic, virtual representation ...
  • Buckling Instability in Cracked Pressure Vessels Subjected to Combined Loading 
    PROJECT SUPERVISOR ASSISTANT PROFESSOR YASSER RIAZ AWAN, ABDULLAH AMIN MUHAMMAD UMAIR KHALID SYED HASNAIN MUZAMMIL (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    In this study the eigenvalue buckling analysis of cracked pressure vessels is done using eight node degenerated elements in the framework of finite element analysis (FEA). First, the validity and efficiency of the ...
  • Design and Fabrication of Small-Scale Diffusion Bonding Apparatus for Regular and Irregular Shaped Parts 
    PROJECT SUPERVISOR ASST.PROF. YASSER RIAZ AWAN, Abdul Rehman Ahmad Munir Shafa Ullah Khan Mehdi Muhammad Ahmad Ayesha Naveed (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    In this report the innovative design and fabrication of diffusion bonding apparatus is presented. Testing of apparatus by forming a joint between metals is discussed in the report. Initially the parameters were identified ...
  • Development of Mechanical Vibrations Based Cleaning for Solar Panel Maintenance and Optimization 
    PROJECT SUPERVISOR Asst. Prof Dr. Abdur Rehman Mazhar, ABDUS SABOOR MUHAMMAD HASSAAN MADNI (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    This project investigates the effectiveness and safety of ultrasonic cleaning for solar panels, employing high-frequency (40 kHz) vibrations to remove dust without water or detergents. Experimental analysis, conducted ...
  • Design and Fabrication of a Portable Wind Tunnel 
    PROJECT SUPERVISOR Dr. Imran Akhtar, Muhammad Abubakar Muhammad Uzair Latif (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    Building a portable mini wind tunnel using acrylic operating on upto 6ms-1 testing its functionality on styrofoam airfoil and finding its weight distribution using load cell and using servo motor to rotate and observe ...
  • Smart Cold Storage System 
    PROJECT SUPERVISOR Dr. Abdur Rehman Mazhar, Nouman Rafiq Asjad Ikram Ahsan Sher Umais Khan (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    In an era of environmental awareness and innovative technology, our final year project represents a significant breakthrough in the field of cold storage solutions. We present a smart, eco-friendly cold storage with ...
  • Quasi-Static Crush Performance Improvement and Kinking Minimization of Fiber reinforced Hybrid Composites 
    PROJECT SUPERVISOR DR. ZUBAIR SAJID PROJECT CO-SUPERVISOR DR. MUHAMMAD REHAN KHAN, Rabeet Ahmad Khubaib Ali Saif Ullah (College of Electrical & Mechanical Engineering (CEME), NUST, 2024)
    In this respect, the project straddles the significant research gap that exists in the behavior of Carbon Fiber Reinforced Plastics (CFRPs) under quasi-static crush performance and kinking minimization of hybrid ...

Search DSpace


Advanced Search

Browse

My Account