BS: Recent submissions

  • Design and Fabrication of a Four-Legged Robot 
    PROJECT SUPERVISOR DR. RAJA AMER AZIM, ALI ASIF ABDUL MUTAAL MUHAMMAD INAM-UL-HAQ (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    This report presents the design and implementation of a four-legged robot that can perform various locomotion tasks. The robot hardware consists of four legs, each with three degrees of freedom, and a central body that ...
  • Design and Fabrication of an E-Bicycle Conversion Kit 
    PROJECT SUPERVISOR HASAN AFTAB SAEED YASSER RIAZ AWAN, WASIF DILDAR IZHARULHAQ ABUBAKAR HANIF MUHAMMAD UMER (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    The end of the 20th century saw the warmest decade ever on record. Typically linked to the increase in the use of fossil fuels for transport and energy generation, the phenomenon of global warming caught everyone’s attention. ...
  • Design and Fabrication of Linear Gantry Robottic System to Automate Transformer Core Stacking Process 
    PROJECT SUPERVISOR DR. RAJA AMIR AZEEM, SYED ZAHID AHMAD HAIDER ALI MUHAMMAD NAEEM MIR MATEE UR REHMAN ASHRAF (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    The study highlights the solution of problem, that is not pre-engineered, through identifying the problem extensively using napkin sketch, budgeting, loads and speeds. Those key design considerations include movement, space ...
  • Design, Fabrication and Path Planning Of a Collaborative Scara 
    PROJECT SUPERVISOR ASSOC. PROF. DR. AMIR HAMZA PROF. DR. MOHSIN TIWANA ASST PROF. DR. HASAN AFTAB SAEED, NS HADI AHMED PIRZADA NS SARMAD SHOAIB IKRAM NS MUHAMMAD SAAD SOHAIL (2023)
    We aim to design, manufacture, and perform a comprehensive path planning analysis of a 4 DoF (Degree of Freedom) Collaborative SCARA (Selectively Compliant Articulated Robotic Arm). The versatile nature of the robotic ...
  • Design and Fabrication of a Bench Top Pellet Filament Extruder System for 3-D Printing Applications 
    PROJECT SUPERVISOR Lecturer Usman Zia PROJECT CO-SUPERVISOR Dr. Hasan Aftab Saeed, Mateen Ahmad Nouman Ashfaq (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    The project aims to develop an innovative and compact system capable of producing highquality 3D printing filaments from plastic pellets. The system incorporates crucial components, including a shredder for efficient ...
  • Design and Development of FSW Process Parameters for dissimilar alloys 
    PROJECT SUPERVISORS: Dr. Hasan Aftab Saeed Asst. Prof. Yasser Riaz Awan, Muhammad Shadeen Raja Muhammad Haris Yazdani Rana Talal Ahmad Khan Muhammad Haris Riaz (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    Friction stir welding (FSW) is a solid-state joining process widely used for joining similar and dissimilar materials and achieving high-quality welds. In this project, the aim was to investigate the effects of process ...
  • Design and Fabrication of E-Bike 
    PROJECT SUPERVISOR ASST PROF DR. HASAN AFTAB SAEED ASST PROF YASSER RIAZ AWAN, SAIM WAQAR HASSAN ALI SYED (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    The project revolves around improving and harnessing different forms of energy. In today's world, vehicles on the road are increasing daily. With it, the demand for fuel is also on the rise—the hazardous effects of fuel ...
  • Design and Fabrication of Hollow Structured Flat-Free Non-Pneumatic Tyres for Bicycle 
    PROJECT SUPERVISOR ASST. PROF. REHAN AHMED KHAN PROJECT CO-SUPERVISOR DR. SAJID ULLAH BUTT, MUHAMMAD HASSAAN KHAN MUHAMMAD HAMZA FAROOQ QASIM BIN HABIB (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    Non-Pneumatic Tyres (NPT) are a single entity which replaces the conventional pneumatic tyres in transportation applications. Major research has been conducted to design and fabricate a working prototype of such tyre ...
  • Analysis and Development of Novel Insulator for High Voltage Transmission Lines 
    PROJECT SUPERVISOR DR. IMRAN AKHTAR, RANA MUNEEB ANEES BILAL AHMED (2023)
    Porcelain insulators play a critical role in ensuring the reliable transmission of electrical power in overhead power lines. They provide essential insulation against high voltages, effectively preventing electrical ...
  • Design and Fabrication of Power Kit for Wheeled Carts 
    PROJECT SUPERVISOR DR. RASHID NASEER, MUHAMMAD MUZAMMIL TALHA KHALID GULRAIZ REHMAN TAYYAB RAZA (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    Carts are a common means of transportation for a variety of goods and materials, but when loaded with a heavy load, they can be difficult for a person to manually pull. This can be especially challenging for elderly ...
  • Design and Fabrication of Foldable and Portable Electric Bike 
    PROJECT SUPERVISOR DR. RASHID NASEER, ABDULLAH NAEEM BHATTI ALI ABID ALI AHMED MUHAMMAD DANIAL MAQBOOL (2023)
    The increasing demand for automobiles due to the growing global population has presented several challenges that need to be addressed. One major concern is the reliance on Internal Combustion Engines (ICEs) in traditional ...
  • Design of Micro Aeriel Vehicle Through Bioinspired Kinematics Using High Speed Camera 
    PROJECT SUPERVISOR DR IMRAN AKHTAR DR ZAFAR ABBAS BANGASH, DANIYAL ZIAFAT MALIK HUZAIFA SAEED MUHAMMAD USAMA MUHAMMAD TAJDAR IRFANI (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    This paper addresses the design and development of a bio-inspired micro unmanned aerial vehicle (MAV) based on the flight kinematics of dragonflies. Dragonflies exhibit exceptional flight capabilities, including hovering, ...
  • Development of a Vehicle Longitudinal Performance Simulator 
    PROJECT SUPERVISOR DR. RAJA AMER AZIM LT COL SHAHBAZ GHANI TI(M), NS RAO MUHAMMAD ZUBAIR KHAN NS MAAZ ALI NS MUHAMMAD AKIF (2023)
    Analyzing a vehicle’s longitudinal performance during motion and studying it in terms of the engine’s output is one way of enhancing fuel efficiency of a car. The way a person drives their vehicle can affect its fuel ...
  • Development and Testing of a Noval Water Purification and Refrigeration System 
    PROJECT SUPERVISOR Dr. Abdur Rehman Mazhar, NS ALI UBAID NS SYED MUHAMMAD HAMZA SHAH NS MUNEEB ZAFAR ALVI NS SUHAIB MASOOD (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    Water is an essential part of our lives. With the rapid increase in population and industrialization, the need for water has also increased, leading to an incremental increase in water pollution. Consumption of such ...
  • Energy Harvesting System for Highways and Railway Tracks 
    PROJECT SUPERVISOR Dr. Abdur Rehman Mazhar, NC KAINAT ALI NC EIMAN SAQIB (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    The energy consumption in the world is increasing exponentially causing the depletion of fossil fuel-based resources. At the same time, there is extreme volatility in their prices and supply. Consequently, we must adapt ...
  • Development of Hybrid Drivetain 
    PROJECT SUPERVISOR Dr RAJA AMER AZIM, AHMAD DIN UMAR SAJJAD MUHAMMAD HARIS ARMUGHAN ULLAH (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    Conventional ICE vehicles, while operating in urban settings, perform at very low efficiency due to inherent power characteristics Hybrid vehicles have been developed successfully to improve the engine efficiency ...
  • Design and Manufacture of Electric Powertrain for the Conversion of ICE vehicle into Full Electric Vehicle 
    PROJECT SUPERVISOR DR. RAJA AMER AZIM, MUHAMMAD HASSAN MUSTAFA MUHAMMAD SAAD IDREES MUHAMMAD HASSAN SAEED (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    The main aim of this research is to present research findings and the work carried out related to the design of an Electric power train for front-wheel drive four-wheelers, identifying the impact that electric vehicles ...
  • Experimental Investigation of Erosive Wear of Steel For Liquid-Solid Flow 
    Project Supervisor: Dr Muhammad Rehan Khan, Muhammad Zain Muhammad Atif Shahzad Zeeshan Haider (College of Electrical and Mechanical Engineering (CEME), NUST, 2022)
    Erosion is the degradation of the flow carrying devices used in hydrocarbon and mineral process industries, especially those involved with solid particle transportation at high conveying velocities, such as many onshore ...
  • Design and Manufacturing of A Small-Scale Energy Harvesting Demonstration Model For Vibrations Lab 
    Project Supervisor: Dr. Rashid Naseer, Usama Irfan Muhammad Zubair Muhammad Ahab Sultan Asbaat Ahmad (College of Electrical and Mechanical Engineering (CEME), NUST, 2022)
    The increasing demand of energy has highlighted the exploration of alternate sources of energy. Non- renewable energy sources such as fossil fuels will run out one day. Moreover, the potential harm done to the environment ...
  • Design, Analysis and Fabrication of A Semi-Automated Medical Bed With Assisted Patient Care Transfer System 
    Project Supervisor: Asst Prof Saheeb Kiyani, Bilal Ahmed Ijaz Abdel Hameed Khalid Nawras Jehad (College of Electrical and Mechanical Engineering (CEME), NUST, 2022)
    Bed is the one piece of equipment nearly everyone working in, or using health care service will come into contact with so the right bed can enhance the quality of life of those who use them. When the patient come from ...

Search DSpace


Advanced Search

Browse

My Account