NUST Institutional Repository

Browsing Electrical Engineering by Title

Browsing Electrical Engineering by Title

Sort by: Order: Results:

  • 0.8 to 3.0 GHz Antenna for General Purpose Applications 
    Aneeba Masood (SEECS, National University of Sciences and Technology, Islamabad, 2010)
    This project report describes the design process of 0.8 to 3.0 GHz antenna. Our aim was set to designing a high quality wideband antenna, working for general purpose applications. Software used for designing and simulation ...
  • A 32-Bit Parameterized Leon-3 Processor with Custom Peripheral Integration 
    Talal Khaliq (SEECS, National University of Sciences and Technology, Islamabad, 2018)
    The main purpose of this thesis is to integrate custom cores as peripherals as Co-Processors (CPs) to a processor. For this purpose, a 32-bit open source processor was be tested on an FPGA. For proof of concept, a ...
  • A 32-Bit Parameterized Leon-3 Processor with Custom Peripheral Integration 
    Khaliq, Talal (SEEC, National University of Science & Technology, 2018)
    The main purpose of this thesis is to integrate custom cores as peripherals as Co-Processors (CPs) to a processor. For this purpose, a 32-bit open source processor was be tested on an FPGA. For proof of concept, a ...
  • 360° Interactive Display 
    Muhammad Ali, Mohsin Nasir (SEECS, National University of Sciences and Technology, Islamabad, 2012)
    Flat display screens limit the view-ability of contents being displayed. Remember the trouble of rotating the display monitor when collaborating on a round table. The problem can be catered by cylindrical screen which ...
  • 3D Digitization and Mapping of Heritage Monuments Using Low Cost Light Weight Unmanned Aerial Vehicle (UAV) 
    Abdullah Tariq (SEECS, National University of Sciences and Technology, Islamabad, 2018)
    Many archeological sites have been destroyed totally or partially around the globe due to earth quakes, oods and/or re. It is the need of time to digi- tally preserve the historical sites before they get destroyed. ...
  • 3D echocardiography fusion to improve image quality, leading to improved disease diagnosis 
    Ammara Nasim, Aisha Gul Hafeez (SEECS, National University of Sciences and Technology, Islamabad, 2012)
    3D echocardiography is a unique method of visualizing the morphology of heart. In 3D echocardiography multiple images of the subject are acquired by the probe are not of very good quality. Thus, ordinary image processing ...
  • 3D Printer-Ecraft 
    Saleha Asad (SEECS, National University of Sciences and Technology, Islamabad, 2010)
    3D Printing is a new and creative step in the field of rapid manufacturing where people look for easy and quick solutions to their problems. The world has grown so fast that nobody has the time to go to the market to ...
  • 3D Profile Digitizer 
    Abdul Rehman Anwer, Fahad Mubeen; Rizwan Ahmad Bhatti, Sohaib Ishtiaq Malik (SEECS, National University of Sciences and Technology, Islamabad, 2015)
    Quality Control is one of the most important stages of a manufacturing process in which the manufactured goods are typically compared to a reference for matching its dimensions, texture, color and other features. Traditional ...
  • 4× 8 SIW based Slotted Phased Array at Ku Band for Satellite Applications 
    Awan, Hafsah Niaz (School of Electrical Engineering and Computer Sciences (SEECS) NUST, 2023)
    Satellites communications play very important role in global communication nowadays. Applications for communications can be found in several bands, including the L-, X-, Ku-, and Ka-bands. To track satellites Mechanical ...
  • 5G Antenna Design using SIW Technique 
    Shakeel, Muhammad Usman (SEECS-School of Electrical Engineering and Computer Science NUST Islamabad, 2022)
    Owing to exponential growth in mobile communication and the requirement of intercon necting multiple wireless devices, high data rates, low latency and large bandwidth are the basic requirements. To serve this purpose, ...
  • Acad-GPS: Academic Grade Prediction System 
    Muhammad Farooq Mazhar (SEECS, National University of Sciences and Technology, Islamabad, 2018)
    Students that fail courses have to retake those courses, often during regular semesters, sometimes during summer semesters. Every summer, NUST has to keep their departments open to o er courses to allow students to ...
  • Accelerating StoRM A CUDA based extension 
    Muhammad Hannan Khan (SEECS NUST, 2021)
  • Accelerating StRM: A CUDA based extension 
    Khan, Muhammad Hannan (School of Electrical Engineering and Computer Science,(SEECS) NUST, 2021)
  • Accelerating the IP Verification Coverage Closure through Machine Learning Within the UVM Framework 
    Shah, Syed Jawad Hussain (School of Electrical Engineering and Computer Science,(SEECS) NUST Islamabad, 2024)
    This proposal outlines the utilization of AI and ML algorithms within the UVM framework to enhance the stimulus selection process in design verification. With the exponential growth in system complexity, efficient ...
  • Activity Detection on the Apple IOS Smartphone 
    Muhammad Sarmad Hafeez (SEECS, National University of Sciences and Technology, Islamabad, 2017)
    Collection of Data using smartphone sensors is an upcoming field for research. An efficient application that can monitor health by extracting data of the sensors in a smartphone would change the paradigm of health monitoring. ...
  • Actualizing Fast Lanes Using Software Defined Networking and Smart Contract 
    Shabir, Muhammad Muneem (School of Electrical Engineering and Computer Science,(SEECS) NUST, 2019)
  • Actualizing Fast Lanes using Software Defined Networking and SmartContract 
    Shabir, Muhammad Muneem (School of Electrical Engineering and Computer Science NUST SEECS, 2019)
    Fast Lanes in service provider‘s network are provisioned on each node throughout the route. Number of resources are required to construct a Fast Lane over a large network and a Fast Lane keeps on retaining the network ...
  • Adaptive Aeroservoelastic Control Design for a Flexible-Wing High-Altitude-Long-Endurance Unmanned-Air-Vehicle 
    Salman, Muhammad (School of Electrical Engineering & Computer Science (SEECS), NUST, 2024)
    This work presents the use of adaptive control techniques to design the control system of a flexible-wing HALE aircraft. The structure and Aerodynamic model based on Predator UAV is modeled in NASTRAN, and relevant ...
  • Adaptive Backstepping Based Control of Heave-Induced Pressure Deviations In Managed Pressure Drilling (MPD) 
    Atif Naveed (SEECS, National University of Sciences and Technology, Islamabad, 2017)
    Managed pressure drilling (MPD) is a controlled process of o shore hydrocarbons' exploration. It is not only capable to handle weather's severe e ects on drilling process but it also improves the e ciency of o shore ...
  • An Adaptive Backstepping Based Nonlinear Controller for Patients with Type 1 Diabetes 
    Faysal Munir (SEECS, National University of Sciences and Technology, Islamabad, 2016)
    Automatic controllers for insulin infusion are used in arti cial pancreas for treatment of diabetes type 1 patients. Controllers are designed based on some models of blood glucose-insulin system. A physiologically veri ...

Search DSpace


Advanced Search

Browse

My Account