Mechanical Engineering: Recent submissions

  • Design and fabrication of an Ornithopter 
    PROJECT SUPERVISOR DR. IMRAN AKHTAR PROJECT CO-SUPERVISOR DR. ZAFAR BANGASH, NC ABDUL REHMAN NC DANIAL AHMAD NC IJAZ AHMED (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    Nature has always inspired us to solve our problems in a different way. Quadcopters, one of the most common and commercially available unmanned aerial vehicles, are good for cinematic shots, spying and even various other ...
  • Thermomechanical Analysis of Electic Vehicle Battery Packs 
    PROJECT SUPERVISOR DR. RAJA AMIR AZEEM, MUHAMMAD FARHAN HAIDER ALI HAIDER (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    The Battery Thermal Management System (BTMS) plays a crucial role in Electric Vehicles' (EVs) performance, safety, and longevity. The BTMS controls the battery temperature and prevents overheating or overcooling of the ...
  • Design and Fabrication of a Pico Hydropower Generation System 
    PROJECT SUPERVISOR Dr. Abdur Rehman Mazhar, Ahsen Ali Ahtasham Ahmed Virk Abdussalam Majid Muhammad Fouzan Butt (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    With an ever-increasing demand for energy and the depletion of naturally occurring resources, the focus is shifting towards devising clean and sustainable energy production methods. One of these methods is the usage of ...
  • Path Planning of Robotic Manipulator for Application of Automated Layup in Composite Manufacturing 
    PROJECT SUPERVISOR DR. RAJA AMER AZIM PROJECT CO-SUPERVISOR DR. AMIR HAMZA, MUHAMMAD TARIQ SHAH NUFAIL AHMED NADEEM FARHAN ALI (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    The project achieved the automation of the rolling process for the application of automated layup, specifically for the rolling of the pre-preg layer. However, it is important to note that the actual laying of the layers ...
  • Design and Manufacture of Low-cost Dynamometer for Small Engine 
    PROJECT SUPERVISOR Dr. Raja Amer Azim, Mohammad Sharjeel Arshad Hashmi Umer Abdur Rahman Muhammad Shahbaz Haider Nazim (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    Dynamometers are devices used to measure the torque or force. In the automotive industry, dynamometers refer to devices used to measure the torque output of an engine. Dynamometers are used throughout the world to test and ...
  • Design, Analysis And Fabrication Of Efficient Speed Breaker For Power Generation 
    PROJECT SUPERVISOR PROJECT Co. SUPERVISOR Dr. Hassan Aftab Saeed Dr. Nasir Bashir, Muhammad Haris Haider Ali Muhammad Zubair Malik Anees Ur Rehman (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
  • Design and Fabrication of a Four-Legged Robot 
    PROJECT SUPERVISOR DR. RAJA AMER AZIM, ALI ASIF ABDUL MUTAAL MUHAMMAD INAM-UL-HAQ (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    This report presents the design and implementation of a four-legged robot that can perform various locomotion tasks. The robot hardware consists of four legs, each with three degrees of freedom, and a central body that ...
  • Design and Fabrication of an E-Bicycle Conversion Kit 
    PROJECT SUPERVISOR HASAN AFTAB SAEED YASSER RIAZ AWAN, WASIF DILDAR IZHARULHAQ ABUBAKAR HANIF MUHAMMAD UMER (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    The end of the 20th century saw the warmest decade ever on record. Typically linked to the increase in the use of fossil fuels for transport and energy generation, the phenomenon of global warming caught everyone’s attention. ...
  • Design and Fabrication of Linear Gantry Robottic System to Automate Transformer Core Stacking Process 
    PROJECT SUPERVISOR DR. RAJA AMIR AZEEM, SYED ZAHID AHMAD HAIDER ALI MUHAMMAD NAEEM MIR MATEE UR REHMAN ASHRAF (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    The study highlights the solution of problem, that is not pre-engineered, through identifying the problem extensively using napkin sketch, budgeting, loads and speeds. Those key design considerations include movement, space ...
  • Design, Fabrication and Path Planning Of a Collaborative Scara 
    PROJECT SUPERVISOR ASSOC. PROF. DR. AMIR HAMZA PROF. DR. MOHSIN TIWANA ASST PROF. DR. HASAN AFTAB SAEED, NS HADI AHMED PIRZADA NS SARMAD SHOAIB IKRAM NS MUHAMMAD SAAD SOHAIL (2023)
    We aim to design, manufacture, and perform a comprehensive path planning analysis of a 4 DoF (Degree of Freedom) Collaborative SCARA (Selectively Compliant Articulated Robotic Arm). The versatile nature of the robotic ...
  • Design and Fabrication of a Bench Top Pellet Filament Extruder System for 3-D Printing Applications 
    PROJECT SUPERVISOR Lecturer Usman Zia PROJECT CO-SUPERVISOR Dr. Hasan Aftab Saeed, Mateen Ahmad Nouman Ashfaq (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    The project aims to develop an innovative and compact system capable of producing highquality 3D printing filaments from plastic pellets. The system incorporates crucial components, including a shredder for efficient ...
  • Design and Development of FSW Process Parameters for dissimilar alloys 
    PROJECT SUPERVISORS: Dr. Hasan Aftab Saeed Asst. Prof. Yasser Riaz Awan, Muhammad Shadeen Raja Muhammad Haris Yazdani Rana Talal Ahmad Khan Muhammad Haris Riaz (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    Friction stir welding (FSW) is a solid-state joining process widely used for joining similar and dissimilar materials and achieving high-quality welds. In this project, the aim was to investigate the effects of process ...
  • Design and Fabrication of E-Bike 
    PROJECT SUPERVISOR ASST PROF DR. HASAN AFTAB SAEED ASST PROF YASSER RIAZ AWAN, SAIM WAQAR HASSAN ALI SYED (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    The project revolves around improving and harnessing different forms of energy. In today's world, vehicles on the road are increasing daily. With it, the demand for fuel is also on the rise—the hazardous effects of fuel ...
  • Design and Fabrication of Hollow Structured Flat-Free Non-Pneumatic Tyres for Bicycle 
    PROJECT SUPERVISOR ASST. PROF. REHAN AHMED KHAN PROJECT CO-SUPERVISOR DR. SAJID ULLAH BUTT, MUHAMMAD HASSAAN KHAN MUHAMMAD HAMZA FAROOQ QASIM BIN HABIB (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    Non-Pneumatic Tyres (NPT) are a single entity which replaces the conventional pneumatic tyres in transportation applications. Major research has been conducted to design and fabricate a working prototype of such tyre ...
  • Analysis and Development of Novel Insulator for High Voltage Transmission Lines 
    PROJECT SUPERVISOR DR. IMRAN AKHTAR, RANA MUNEEB ANEES BILAL AHMED (2023)
    Porcelain insulators play a critical role in ensuring the reliable transmission of electrical power in overhead power lines. They provide essential insulation against high voltages, effectively preventing electrical ...
  • Design and Fabrication of Power Kit for Wheeled Carts 
    PROJECT SUPERVISOR DR. RASHID NASEER, MUHAMMAD MUZAMMIL TALHA KHALID GULRAIZ REHMAN TAYYAB RAZA (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    Carts are a common means of transportation for a variety of goods and materials, but when loaded with a heavy load, they can be difficult for a person to manually pull. This can be especially challenging for elderly ...
  • Design and Fabrication of Foldable and Portable Electric Bike 
    PROJECT SUPERVISOR DR. RASHID NASEER, ABDULLAH NAEEM BHATTI ALI ABID ALI AHMED MUHAMMAD DANIAL MAQBOOL (2023)
    The increasing demand for automobiles due to the growing global population has presented several challenges that need to be addressed. One major concern is the reliance on Internal Combustion Engines (ICEs) in traditional ...
  • Design of Micro Aeriel Vehicle Through Bioinspired Kinematics Using High Speed Camera 
    PROJECT SUPERVISOR DR IMRAN AKHTAR DR ZAFAR ABBAS BANGASH, DANIYAL ZIAFAT MALIK HUZAIFA SAEED MUHAMMAD USAMA MUHAMMAD TAJDAR IRFANI (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    This paper addresses the design and development of a bio-inspired micro unmanned aerial vehicle (MAV) based on the flight kinematics of dragonflies. Dragonflies exhibit exceptional flight capabilities, including hovering, ...
  • Development of a Vehicle Longitudinal Performance Simulator 
    PROJECT SUPERVISOR DR. RAJA AMER AZIM LT COL SHAHBAZ GHANI TI(M), NS RAO MUHAMMAD ZUBAIR KHAN NS MAAZ ALI NS MUHAMMAD AKIF (2023)
    Analyzing a vehicle’s longitudinal performance during motion and studying it in terms of the engine’s output is one way of enhancing fuel efficiency of a car. The way a person drives their vehicle can affect its fuel ...
  • Development and Testing of a Noval Water Purification and Refrigeration System 
    PROJECT SUPERVISOR Dr. Abdur Rehman Mazhar, NS ALI UBAID NS SYED MUHAMMAD HAMZA SHAH NS MUNEEB ZAFAR ALVI NS SUHAIB MASOOD (College of Electrical and Mechanical Engineering (CEME), NUST, 2023)
    Water is an essential part of our lives. With the rapid increase in population and industrialization, the need for water has also increased, leading to an incremental increase in water pollution. Consumption of such ...

Search DSpace


Advanced Search

Browse

My Account